LEDs and Luminaire Test Solutions

LISUN’s indoor and outdoor LED luminaires and LED fixtures test solutions fully cover key international standards, providing professional support for testing the safety, photometric, chromatic, and environmental adaptability performance of various LED products. Among these standards, IEC 60598-1:2020 specifies general safety requirements for luminaires, including tests for mechanical strength, electrical insulation, protection against electric shock, and fire resistance; IEC 62722-2-1:2023 focuses on the performance of LED luminaires, covering tests for luminous flux, efficacy, color temperature, color rendering index, and lumen maintenance (L70/L80/L90); CIE 121:1996 offers guidelines for photometric measurement of luminaires, emphasizing luminous intensity distribution and glare control; while IS 16101:2012 and IS 16104:2012 define energy efficiency and safety requirements for the Indian market.

The solutions encompass all critical test items outlined in the aforementioned standards, equipped with a full set of professional testing equipment to meet diverse needs. This includes safety performance tests (such as protection against electric shock, insulation resistance, and resistance to tracking), photometric and chromatic tests (such as luminous flux, luminous intensity distribution, color temperature, and color rendering index), energy efficiency tests (such as luminous efficacy and power factor), and environmental adaptability tests (such as high and low temperature cycling, damp heat aging, dust and water resistance, and salt spray corrosion). This one-stop testing support helps manufacturers and laboratories ensure that LED luminaires and fixtures comply with international standards, guaranteeing their safe, reliable operation and stable performance in various indoor and outdoor scenarios.

LEDs and Luminaries Test Solutions

Standard:

Part 1	IEC 60598-1:2020	Luminaires – Part 1: General requirements and tests
Part 2	IEC 62722-2-1:2023	Luminaire performance – Part 2-1: Particular requirements-LED luminaires
Part 3	CIE 121:1996	The Photometry And Goniophotometry Of Luminaires
Part 4	IS 16101: 2012	General Lighting-LEDs and LED Modules-Terms and Definitior
Part 5	IS 16104: 2012	d.c.OR a.c. Supplied Electronic Control Gear for LED Modules-Performance Requirements

Part 1 IEC 60598-1 Edition 9 Luminaires – Part 1: General requirements and tests

IEC 60598-1 Edition 9 Luminaires – Part 1: General requirements and tests

LISUN supplies the fully test solutions for the following IEC 60598-1:2020, please see the below excel table:

IEC 60598-1:2020 Clause and Subject	LISUN Model
Clause 4.4.4 Lampholders	GNG-G5H/GNG-G13H
Clause 4.12.4 Screwed and other fixed connections	CH338
Clause 4.12.5 Screwed glands shall comply with the following test.	LWMF-1
Clause 4.13.1 Mechanical strength	IK01-06
Clause 4.13.3/4 Test finger	SMT-529T
Clause 4.13.6 (Figure 25)Rotating Barrel Drop Test Machine	LS-DDT1-B
Clause 4.14.2 Mechanical fixings	LS-WJ62
Clause 4.14.3 Adjusting devices testing	DJTJ-1
Clause 4.18 Resistance to corrosion	YWX/Q-010
Clause 4.20 Rough service luminaires – Vibration requirements	LVD-100KG-6D
Clause 4.24 Photobiological hazards	EN62471-C
Clause 4.26.3 Lamp test chain	DJSYL-1
Clause 8.2 Protection against electric shock	SMT-529T
Clause 9.2.1 (Figure 6) Dust proof luminaire tests	SC-015
Clause 9.2.3-9.2.9 Drip-proof luminaires	JL-X
Clause 10.2.1 Test – Insulation resistance	WB2681A
Clause 10.2.2 Test – Electric strength	WB2673C
Clause 10.3 Touch current, protective conductor current and electric burn(Figure G2/G3/G4)	MNTC-G2/G3 & MNTC-G4
Clause 11 Creepage Distances and Clearance	CK-1
Clause 12.3 Endurance test	GDJS-010A
Clause 12.4 Thermal test (normal operation)	TMP-LM
Clause 13.2 Resistance to heat(Figure 10)	ZBP-T & GW-225
Clause 13.3.1 Resistance to flame test	ZY-3
Clause 13.3.2 Resistance to ignition testing	ZRS-3H
Clause 13.4 Resistance to tracking(Figure 11)	TTC-1

Part 2 IEC 62722-2-1:2023 Luminaire performance – Part 2-1: Particular requirements-LED luminaires

LISUN supplies the fully test solutions for the following IEC 62722-2-1:2023, please see the below excel table：

IEC 62722-2-1:2023 Clause and Subject	LISUN MODEL
Clause 8.1 Luminous flux	LPCE-2(LMS-9000)
Clause 8.3 Luminaire luminous efficacy	LPCE-2(LMS-9000)
Clause 8.2 Luminous intensity distribution, peak intensity and beam angle	LSG-6000
Clause 9 Chromaticity coordinates, correlated colour temperature (CCT) and colour rendering	LMS-6000
Clause 10 LED luminaire life	LEDLM-84PL

Part 3 CIE 121:1996 The Photometry And Goniophotometry Of Luminaires

LISUN supplies the fully test solutions for the following CIE 121:1996, please see the below excel table:

CIE 121:1996 Clause and Subject	LISUN MODEL
Clause 2.2.1 Luminaire data per 1 000 lm (of lamp flux)	LPCE-2(LMS-9000)
Clause 2.2.4-2.2.7 Light output ratio (of a luminaire)
Clause 6.3 Luminous flux measurements on luminaires
Clause 2.2.2 Luminous intensity distribution (of a luminaire)	LSG-6000
Clause 2.4.1-2.4.3 Photometer
Clause 3 CO-ORDINATE SYSTEMS FOR THE PHOTOMETRY OF LUMINAIRES
Clause 6.1.3 Photometric measurements on luminaires
Clause 6.2 Luminous intensity distribution measurements
Clause 2.2.3 Ballast lumen factor	HCS-109A
Clause 2.3.6 Reference ballast
Clasue 7.4 Ballast lumen factor
Clause 2.4.4 Illuminance meter	LMS-6000 And PHOTO-200
Clause 6.6 Illuminance measurements	LMS-6000 And PHOTO-200
Clause 6.3 Luminous flux measurements on luminaires	LMS-6000L And PHOTO-200L

Part 4 IS 16101: 2012 General Lighting-LEDs and LED Modules-Terms and Definitior

IS 16101: 2012 General Lighting-LEDs and LED Modules-Terms and Definitior

LISUN supplies the fully test solutions for the following IS 16101: 2012 , please see the below excel table:

IS 16101: 2012 Clause and Subject	LISUN Model
Clause 3.2 Optical Radiation Safety	EN62471-C
Clause 3.3 Retinal Hazard	EN62471-P
Clause 3.8-3.10 Chromaticity Coordinates and Colour Rendering Index	LPCE-2(LMS-9000)
Clause 3.19/3.45 Junction Temperature and Thermal Resistance	T5
Clause 3.23-3.26 Luminous Flux and Luminous Intensity	LSG-1890B

Part 5 IS 16104: 2012 d.c.OR a.c. Supplied Electronic Control Gear for LED Modules-Performance Requirements

IS 16104: 2012 d.c.OR a.c. Supplied Electronic Control Gear for LED Modules-Performance Requirements

LISUN supplies the fully test solutions for the following IS 16104: 2012, please see the below excel table：

BS IS 16104 Clause and Subject	LISUN Model
3.1 Total Circuit Power	DC3005
3.2 Circuit Power Factor	LS2050B
5.1 Classification according to the load	M9822B
7.3 Capacitive Load Requirement	M9822B
12. Test for Reduced LED Modules Resistance	WB2681A
13.1 The control gear shall be subjected to a temperature cycling shock test	GDJS-015B
Annex A.3 Firgure 2 Measurement of impedance at audio-Frequencies	FD2810B
Annex B a guide to quoting product life and failure rate	LEDLM-80PL