LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
IEC 60335-1:2020 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.
IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements Standard Download
LISUN supplies the fully test solutions for the following IEC 60335-1:2020, please see the below excel table
| IEC 60335-1:2020 Clause and Subject | LISUN Model |
| Clause 8.1.1IEC 61032 Standard Articulated Test Probe with 10N Thrust | SMT-02T10 |
| Clause 8.1.2 Test Probe 13 with Cable with standard EN 61032 | SMT-1213C |
| Clause 8.1.3 Test Probe 41 of IEC 61032 – Test Cone for Access Probes to Hazardous Hot or Glowing Parts | SMT-1241 |
| Clause 11 Heating | TMPWS-010 |
| Clause 12 Figure1/2/3/4 Leakage current and electric strength at operating temperature | MNTC-G2G3 |
| Clause 14 Transient overvoltages Table6 | SUG335 |
| Clause 15.1.1 IP Waterproof test | JL-12/ JL-34/ JL-56 /JL-7 |
| Clause 16.2 Leakage current | WB2675D |
| Clause 16.3 electric strength | WB2671B |
| Clause 19.11.4.1 ESD Simulator Guns | ESD61000-2 |
| Clause 19.11.4.3 EFT Immunity Measurement | EFT61000-4 |
| Clause 19.11.4.4 Surge test | SG61000-5 |
| Clause 19.11.4.5 RF Conducted Immunity Test System | RFCI61000-6-85W & AB-100W |
| Clause 19.11.4.6 Voltage Dips and Interruptions Generator | CSS61000-11 |
| Clause 19.11.4.7 Programmable AC/DC Testing Power Supply System | LSP-EMC500VA |
| Clause 20.1 Stability | WDT-2 |
| Clause 21.1 Mechanical strength | IK04 |
| Clause 21.2 Figure7 Test Finger Nail for IEC 60335-1 Figure 7 | SMT-335F7 |
| Clause 21.11 IEC 61032 Unjointed Test Finger Test Probe 11 | SMT-1211C |
| Clause 21.18 Resistant to corrosion | YWX/Q-010 |
| Clause 22.5 Peak Power Cutoff Device | LS-RVT-2000W |
| Clause 23.3 and 25.14 Figure 8 Flexing test apparatus, | SW-6 |
| Clause 29.2 Annex N Proof tracking test apparatus | TTC-1 |
| Clause 29.3.3 High temperature test | GW-225 |
| Clause 30.1 Annex O Figure O.1 Ball pressure test | ZBP-T |
| Clause 30.2.1/2/3 Annex O Figure O.2 Glow wire test | ZRS-3H |
| Clause 30.2.4 Annex E Needle flame test | ZY-3 |
| Clause 31 Salt Spray test | YWX/Q-010 |
| Annex B Automatic Double-Arms Drop Test Machine | DT-60KG |
| Annex H 3 Position Plug Socket Switch Life Tester | CZKS-3 & DFX-40 |
| Annex L Creepage Distance Ruler | CK-1 |
There are some standards focus on specifying technical requirements and test methods for different categories of lampholders in the lighting field, ensuring their safety, compatibility, and...
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN’s cable and wire test solutions meet IEC 60245-1, IEC 60227-1, IEC 60502-1 and IEC 60189 standards, covering electrical, mechanical, and safety tests for global compliance.
LISUN has all equipment according to the IEC60669 measurement, including environmental chamber, IP code waterproof dustproof test, switch lift test, etc.
LISUN’s plugs and sockets test solutions meet IEC 60884-1, IEC 60670-1, IEC 62613-1 standards, covering electrical, mechanical and safety tests for global compliance.
LISUN provide full test solutions for HID lamp, including integrating sphere system, goniophotometer system, EMI EMC chamber, HID ballast tester, electrical safety test, etc.
Lisun can supply full test solutions for fluorescent lamp, including integrating sphere system, goniophotometer system, EMI EMC test, electronic ballast tester, electrical safety test, etc.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s mobile and network test solutions include EMC/EMI testing, color glossiness measurement, IP waterproof/dustproof tests, IK impact tests, and environmental simulation, meeting international standards.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract The salt corrosion test is a core detection method to simulate marine and industrial salt fog corrosion environments. Relying on professional salt fog test equipment...
Abstract: Electrostatic discharge (ESD) is a typical electromagnetic interference source that causes crash, reset, data abnormality and even hardware damage of electrical and electronic equipment. esd...
Abstract Salt spray corrosion is a major environmental factor affecting the service life and reliability of metal, coating, electrical and electronic products. As the core equipment...
Abstract: The waterproof performance of electrical and electronic product enclosures directly determines the safety, reliability and service life of equipment under humid, rainy, immersion and other...
Abstract Needle flame test equipment is an essential fire safety testing device in fields such as electrical and electronic products, home appliances, lighting, and information technology...
Abstract: The surge voltage test generator is key equipment for EMC immunity testing, mainly used to simulate transient strong interferences such as lightning induced surges and...
Abstract Salt testing equipment has emerged as an essential instrument for evaluating the corrosion resistance of metallic materials and protective coatings across diverse industrial applications. This...
Abstract Water spray test chambers designed for IPX5 and IPX6 waterproof testing represent critical equipment for verifying the ingress protection capabilities of electrical and electronic product...
Abstract: The burst generator is a high-precision device specially designed for electromagnetic compatibility (EMC) immunity testing. Its core function is to simulate high-frequency burst interference that...
Abstract: Glow wire flammability index (GWFI) is a core indicator for evaluating the flame retardant performance of products and plastic components in electrical and electronic engineering,...
Abstract As the core testing equipment for simulating artificial salt spray corrosion environments, salt spray cabinet is a key tool for evaluating the corrosion resistance of...
Abstract Electrostatic discharge (ESD) is a critical interference source affecting the electromagnetic compatibility of electrical and electronic equipment. The operational stability of equipment under electrostatic interference...
Abstract: The EFT pulse generator is a high-precision device specially designed for Electromagnetic Compatibility (EMC) immunity tests. Its core function is to simulate high-frequency transient burst...
Abstract: The EFT pulse generator is a high-precision instrument specially designed for electromagnetic compatibility (EMC) immunity testing. Its core function is to simulate high-frequency fast transient...
Abstract: This paper takes the JL‑56 IPX5 and IPX6 Waterproof Testing Machine in the LISUN JL‑X waterproof test system as the research object. Based on the...
Abstract: Needle flame test equipment is a core fire safety detection device in the fields of electrical and electronic products, household appliances, lighting, and information technology...
Abstract IPX3/4 testing for lighting fixtures represents a critical validation methodology for luminaires deployed in challenging environmental conditions. This systematic analysis examines the oscillating tube apparatus...
Abstract Glow wire apparatus testing has become a critical method for evaluating flame retardancy and fire safety of electrical and electronic products. This paper presents a...
The needle flame test apparatus is a core device for fire safety testing in the electrical and electronic, household appliance, lighting and other industries, mainly used...
Abstract: The lightning surge simulator is a key instrument in the field of EMC testing for evaluating equipment immunity against surge interference, and its performance directly...
Abstract: The salt spray corrosion test chamber is a core environmental simulation device for corrosion resistance testing of materials and products, playing an irreplaceable role in...
Abstract: Flame retardancy performance is a core safety indicator for electrical and electronic products, household appliances, lighting equipment and their plastic components. As a high-precision testing...
Abstract: The burst tester is a high-precision device core to the field of electromagnetic compatibility (EMC) immunity testing. Its core value is to simulate high-frequency burst...
Abstract IEC 60529 IPX3/IPX4 Testing establishes the definitive methodology for evaluating enclosure protection against sprayed water in luminaire applications. This comprehensive analysis examines five critical engineering...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
On February 24, 2026, the Bureau of Indian Standards (BIS) officially released the revised safety standard for self-ballasted LED lamps for general lighting, IS 16102-1:2026, which...
Abstract: The systematic evaluation of the waterproof performance of electronic and electrical products is a critical step in ensuring product reliability and market compliance. As the...
Abstract: The water spray test is a core method for verifying the waterproof and protective capabilities of electronic and electrical products. By simulating water ingress conditions...
Abstract: Salt spray test corrosion is a core method for evaluating the corrosion resistance of materials and products. As a key device for simulating salt spray...
Abstract Electrostatic discharge (ESD) is a common electromagnetic interference source during the production, transportation, and operation of electrical and electronic equipment, which may easily cause performance...
Abstract With the rapid development of electrical and electronic products, household appliances, lighting equipment and other industries, the flame retardancy of products and plastic components has...
Abstract With the continuous improvement of waterproof performance requirements for products in industries such as electronic and electrical appliances, auto parts, ipx8 waterproof testing (the highest...
Abstract:With the acceleration of global industrialization, the ability of electronic, automotive, and lighting equipment to withstand extreme climatic conditions has become a core measure of product...
Abstract Salt spray corrosion is one of the main environmental factors leading to the failure of metal materials and various industrial products. The global economic loss...
Abstract This paper systematically elucidates the technical principles and standardized methodologies for the IPX3 and IPX4 water ingress testing, which are critical assessments within the ingress...
Abstract Transient overvoltages and overcurrents caused by lightning strikes and grid switching operations are critical factors threatening the reliability of electrical and electronic equipment. The impulse...
Abstract How to do ball pressure test? The Ball Pressure Test is a core safety assessment procedure used to evaluate the thermal deformation resistance of non-metallic...
A recurrent surge generator is a device meant to repeat that pulses of a standardized surge consistently over sustained periods in order to test how the...
A glow wire test apparatus is a vital tool that can be used to measure the fire hazard in electrical and electronic devices. It replicates the...
The surge tester is usually considered based on the maximum voltage but even this end of measurement alone does not say much about the actual performance...
A lighting surge generator has characteristics that are intended to replicate high power transient overvoltage’s that take place as a result of lightning hits and extreme...
Impulse voltage generator is one of the basic instruments used to test the insulation strength of high voltage equipment with transient conditions. In contrast to steady...
The surge tester manufacturers are in a highly controlled technical arena that the equipment meets various international standards related to EMC at the same time. IEC...
Abstract In the design and manufacturing of modern electrical and electronic products, the enclosure protection rating is a core indicator for assessing their reliability, safety, and...
A surge tester is characterized not just by the voltage it is capable of reaching but also by its ability to duplicate standardized transient waveforms when...
Abstract With the rapid development of industries such as electrical and electronic equipment, household appliances, lighting, and information technology devices, the fire risk caused by faults...
Abstract Electrostatic discharge (ESD) is a common electromagnetic interference source during the operation of electrical and electronic equipment, which may easily cause abnormal performance, functional failure,...
Abstract Salt spray corrosion is one of the core factors leading to metal material failure and reduced product reliability in marine environments and industrial scenarios. Accurately...
An EM Test surge generator is special equipment which replicates the high-energy transient overvoltage’s a product is likely to experience in the field enabling engineers to...
The devices of electricity and electronic equipment which are attached to power and signal line are prone to the transient overvoltage occurrence as a result of...
Electronic equipment installed into real-world conditions is often vulnerable to transient overvoltage conditions due to lightning strikes, switching of power grids, interrupting inductive loads, and electrostatically...
Electrostatic discharge happens to be one of the most frequently acquired but poorly understood threats to the electronic equipment. The ESD test is conducted as per...
Electrostatic discharge is also one of the most hazardous and destructive dangers to present-day electronic circuits. With the shrinkage, quicker, more complexified devices, even the slightest...
The glow wire test standard is the most broadly applied test to determine the ignition resistance of insulating materials, plastics and enclosure parts subjected to overheating...
The contemporary electronic equipment should be usable in the conditions when electric problems cannot be avoided. Any activities involving switching of power, lightning-induced transients, relay activities...
Exposure to water has become one of the leading factors of failure of the electronic and mechanized commodities which are either being used in the outdoor...
One of the most unpredictable failures in the modern electronics is the electrostatic discharge. The smaller, faster and denser the device, the lower the components capability...
Safety inspection of electrical and electronic products in regard to fire safety is a prerequisite in the world-wide industries. As devices get smaller and denser and...
The modern power distribution networks have been based on the use of protective devices that do not fail when responding to sudden changes in electricity. The...
Waterproofing is a critical design consideration to current electronic and mechanical designers that consider using their products in wet or outdoor environments. Consumer electronics, industrial controllers,...
The validation of electrostatic discharge has now become a compulsory step to most of the electronic products, industry assemblies, smart appliances, battery run modules as well...
With the globalization of industries towards electrification, smart power distribution, automobile automation and electronics in consumer devices being smaller than ever, the demand has been put...
One of the most expensive and disruptive faults that have occurred in electrical systems is the insulation failure. Regardless of the application and the utility transformers,...
The ingress protection testing has been significantly changed in the past 10 years with the push of industries among outdoor-rated electronics, sealed industrial controls, marine-rated automation,...
One of the most common tools of immunity testing is an ESD generator, which is necessary to test the achievable robustness of electronic products related to...
Fire safety has been one of the factors that are very relevant in designing electrical and electronic products. The size of circuits is decreasing and heating...
Modern products have to resist environment conditions up to soft rains and jets of high pressure as well as short-term immersion. It does not matter whether...
One of the most frequently occurring reasons of failure in contemporary electronic systems is Electrostatic discharge and to effectively provide tests, proper calibration of an ESD...
Ingress protection test is one of the significant quality assurance measures of present day electrical and mechanical products. An IP test machine enables the engineers to...
Lighting products are more complicated than ever due to the fast-growing use of LED lighting, intelligent luminaires, and sophisticated control systems. Such systems contain microcontrollers, drivers,...
1. Introduction 1.1 Research Background and Significance In industrial production and practical applications, metal materials and various products are often exposed to the erosion of chlorine-containing...
1. Introduction With the rapid iteration and wide application of electrical and electronic equipment, household appliances, lighting, and information technology devices, fire safety issues during product...
Abstract In the increasingly complex electromagnetic environment of electronic and electrical equipment, Electromagnetic Compatibility (EMC) performance has become a key indicator for measuring equipment reliability. Burst...
Abstract Driven by digital and intelligent technologies, electrical and electronic equipment is developing rapidly towards high integration and low power consumption, and its sensitivity to electrostatic...
Abstract With the development of miniaturization and high-powerization of products in fields such as electrical and electronic equipment, home appliances, and lighting, the fire risk caused...
Abstract This paper focuses on the LISUN ZRS-3H Glow-Wire Tester, a high-precision testing device developed by LISUN specifically for evaluating the flame-retardant properties of electrical and...
Abstract In the field of industrial product reliability testing, salt spray corrosion testing is a key method for evaluating the corrosion resistance of materials and coatings,...
Abstract In fields such as electrical and electronic products, new energy, and communications, lightning surge interference faced by equipment is a key factor leading to product...
Abstract The waterproof performance of enclosure protection levels is a core indicator for measuring the reliability of electronic and electrical products, especially crucial for outdoor LED...
Abstract In the actual operating environment of electrical and electronic equipment, high-energy transient interference caused by natural lightning induction and large-capacity inductive-capacitive load switching poses a...
Abstract In the electrical and electronic industry as well as the field of material research and development, the flame retardant safety performance of products is directly...
Abstract The flammability test for plastics is a fundamental assessment in material science and product safety, particularly for components used in electrical and electronic appliances. Among...
Abstract Ingress Protection (IP) testing, as defined by international standards such as IEC 60529, is critical for ensuring the reliability and safety of electrical and electronic...
Abstract With the increasing complexity of electrical and electronic systems, the reliability of power supply lines and internal connecting cables under transient interference has become a...
Abstract Salt spray corrosion, as one of the most destructive forms of atmospheric corrosion, poses a severe threat to the durability and reliability of metal materials...
Abstract Glow wire flammability testing is a critical evaluation method for assessing the fire safety of polymeric materials used in lighting devices, electronic products, and household...
Abstract Fire and flammability testing plays a critical role in ensuring the safety of electrical equipment and combustible materials, as small flames resulting from internal faults...
Abstract: This paper focuses on the EMC EFT immunity tester, especially the LISUN EFT61000 – 4 EFT Immunity Measurement product. It elaborates on the principles of...
Abstract Electrostatic discharge (ESD) generated by human bodies or between objects poses significant risks to electrical and electronic equipment, potentially causing malfunctions or permanent damage. To...
In the ever – evolving landscape of industrial and consumer product manufacturing, the protection of internal components from environmental factors, especially water ingress, is of utmost...
Introduction In modern electrical and electronic systems, transient overvoltages, commonly known as surges, pose a significant threat due to their potential to cause catastrophic equipment failure...
Introduction In today’s world, where electronic products are ubiquitous, the impact of electrostatic discharge (ESD) on device performance and reliability cannot be overlooked. ESD simulator guns...
Introduction A salt fog chamber, commonly referred to as a salt spray test chamber, is a sophisticated piece of equipment designed to replicate the harsh, corrosive...
Introduction A waterproof test chamber is a sophisticated piece of equipment designed to simulate wet environments, such as drizzle, heavy rain, spray, or full immersion, to...
Introduction Electrostatic Discharge (ESD) is a phenomenon that occurs when two objects with different electrostatic potentials come into contact, causing a rapid transfer of electric charge....
Introduction In the contemporary world of electrical and electronic product design, IP (Ingress Protection) ratings serve as a crucial metric for assessing the capability of device...
Abstract Electromagnetic Compatibility (EMC) testing plays a pivotal role in ensuring that electronic devices operate reliably within their intended electromagnetic environment without causing or being affected...
Abstract With the rapid advancement of power electronics technology, electric motors have become indispensable components across various industries including manufacturing, transportation, and household appliances. However, during...
Introduction In the realm of electronic testing and debugging, impulse generators serve as a critical tool widely used across signal generation, timing analysis, device testing, and...
Introduction In the design of modern electronic products, Ingress Protection (IP) ratings are crucial standards for assessing a device’s ability to withstand environmental factors such as...
Abstract In modern electronic design and compliance testing, immunity to electrical fast transients (EFT) is a critical performance indicator. The eft test generator serves as a...
Introduction Corrosion testing plays a crucial role in quality assurance laboratories within the metal industry, especially when it comes to quality control testing. The LISUN YWX/Q-010...
Introduction In today’s rapidly evolving industrial landscape, ensuring the safety and reliability of materials under extreme conditions is more critical than ever. Among various testing methods,...
Abstract Fire safety is a crucial aspect of electrical and electronic device manufacturing. The needle flame testing instrument is an essential tool used to assess the...
Abstract Lightning surges pose a significant threat to electronic devices, making them a crucial topic in electromagnetic compatibility (EMC) research. The IEC 61000-4-5 surge tester provides...
Abstract Leakage tracking testing is a crucial evaluation method used to determine the resistance of insulating materials to electrical tracking under various environmental conditions. This paper...
In the modern world, ensuring the fire safety of electrical products and materials is of paramount importance. The quality and safety of electrical and electronic devices,...
Abstract The IEC 60695-10-2 standard, commonly referred to as the Ball Pressure Test Method, plays a pivotal role in evaluating the heat resistance of electrical components,...
Abstract The needle-flame tester is a critical instrument in assessing the flammability of materials used in electrical and electronic equipment. By simulating small flame exposure, it...
Abstract In the field of electromagnetic compatibility (EMC), ensuring that electronic devices can withstand electrical fast transients (EFT) is a critical aspect of product testing. EFT...
Corrosion is one of the most significant challenges faced by materials exposed to harsh environments. Whether in industrial equipment, automotive parts, or consumer electronics, corrosion can...
Abstract Electrostatic discharge (ESD) can cause significant disruptions and damage to electronic equipment, making it essential to assess and fortify devices against such events. Electrostatic discharge...
Abstract This paper explores the importance of the ball press test for resistance to heat (also known as the ball pressure test) in ensuring the safety...
Abstract In the modern world, the safety of electrical and electronic products, as well as household appliances, has become a critical concern due to the potential...
Introduction Corrosion is a major issue affecting materials, particularly metals, across various industries. In order to understand the corrosion resistance of materials, accelerated testing methods such...
Abstract Waterproof testing is a crucial part of ensuring the durability and functionality of products exposed to water or harsh environmental conditions. A reliable waterproof testing...
Abstract Electrostatic discharge (ESD) is one of the most common sources of electrical interference in modern electronic devices. To ensure product reliability and compliance with industry...
Abstract Flammability test in textile is a crucial assessment to ensure textile products meet fire safety standards. The LISUN ZY-3 Needle Flame Test provides an effective...
Abstract Flame retardancy testing is crucial for ensuring the safety of electrical and electronic products. The Glow Wire Test Procedure is a widely recognized method used...
Abstract: The IPX4 waterproof test plays a critical role in determining the water resistance of electronic devices, electrical components, and other products used in various industries....
Introduction Surge immunity testing is a critical evaluation process in the development of electrical and electronic devices. It ensures the reliability and durability of devices against...
Introduction Corrosion is one of the primary concerns in the durability and longevity of industrial and consumer products. To mitigate the effects of corrosion, rigorous testing...
Abstract The LISUN ZY-3 Needle Flame Tester is a specialized instrument designed to assess the fire hazard posed by small flames that may result from equipment...
Abstract This article explores the applications and principles of waterproof rain test chambers, focusing on their use in evaluating enclosure protection grades under various standards such...
Abstract: This paper focuses on the corrosion resistance testing method of metal deposits and chemical treatment layers of light industrial products based on the ASTM B117...
Abstract: This paper focuses on the electromagnetic compatibility (EMC) testing of power cords and internal connectors in the context of high energy transient interference caused by...
Abstract Electrostatic Discharge (ESD) is a critical concern for the reliability and durability of electrical and electronic equipment. The ESD testing gun is an essential tool...
Abstract: This paper comprehensively investigates the detrimental effects of salt spray corrosion on various products and highlights the advantages of the LISUN YWX/Q-010 Salt Spray Test...
Introduction to EFT Immunity Measurement Electromagnetic Compatibility (EMC) is a crucial factor in the design and operation of electrical and electronic equipment. One of the significant...
Introduction Corrosion is a critical challenge for many industries, particularly those working with metals and alloys. The salt spray test is one of the most widely...
In modern electrical and electronic systems, the ability to withstand high-energy transient disturbances caused by natural lightning strikes or large inductive/capacitive load switching is critical. The...
Abstract Water quality testing equipment is often exposed to challenging environments, including water, dust, and humidity. Ensuring the equipment’s durability and reliability requires stringent waterproof testing...
Abstract Electromagnetic Compatibility (EMC) testing is a crucial part of ensuring that electrical and electronic devices perform well in their intended environments without causing or being...
Introduction In the world of material testing, one of the most critical assessments for understanding the durability of products in harsh environments is salt spray corrosion...
Flammability testing is a critical step in assessing the safety of materials used in electrical and electronic products. The glow wire test machine, such as the...
Corrosion is a persistent issue affecting the durability and performance of components, parts, electronic devices, metal materials, and industrial products. Salt Spray Test Chambers, such as...
Abstract A surge voltage generator is a critical tool in evaluating the immunity of various devices to high-energy transient disturbances caused by natural lightning-induced surges or...
Abstract The waterproof chamber is an essential tool for evaluating the ingress protection (IP) ratings of electronic and electrical products against water intrusion. This paper discusses...
Abstract Impulse surge generators play a critical role in ensuring the safety and reliability of electronic and electrical systems. This article explores the LISUN SG61000-5 Surge...
Abstract Surge testing, particularly in the context of lightning strikes and power-line surges, is a critical aspect of ensuring the reliability and durability of electrical and...
Introduction In the field of electrical safety testing, the tracking resistance of insulation materials is an important criterion for evaluating their performance under high voltage and...
Abstract Flammability testing is a critical process in assessing the fire safety of materials used in electrical devices and household appliances. The LISUN ZY-3 Needle Flame...
Abstract Electrostatic Discharge (ESD) poses a significant threat to sensitive electrical and electronic equipment, as unexpected discharges can lead to malfunction or irreversible damage. Electrostatic discharge...
Introduction The horizontal needle flame test machine plays a crucial role in assessing the flammability of materials used in various electrical and electronic applications. This testing...
Abstract This paper focuses on the ZRS Glow Wire Tester, specifically the LISUN ZRS-3H Glow-wire Test Apparatus, analyzing its application in flame retardant testing within quality...
Abstract The Ball Pressure Test for IEC 60695-10-2 is essential for evaluating heat resistance in electrical products, specifically focusing on components such as plugs and sockets...
Abstract The salt spray corrosion test, an accelerated corrosion testing method, is extensively used to assess the corrosion resistance of various materials and coatings. This study...
Abstract The UL 94 flammability test is crucial in assessing the flammability characteristics of materials used in electrical and electronic devices. This test is particularly important...
Introduction Electrostatic discharge (ESD) is a critical factor in the design and testing of electronic equipment. The ESD test gun, a vital tool in the field...
Introduction The salt spray machine plays a critical role in the evaluation of material resistance to corrosion, particularly in industrial applications. One of the industry-standard tools...
Introduction Electrostatic discharge (ESD) is a critical factor affecting the performance and reliability of electrical and electronic devices. To ensure that devices can withstand ESD events,...
Introduction Surge protection testing is a crucial aspect of ensuring the reliability and safety of electrical and electronic devices, especially in environments prone to lightning strikes...
The needle flame test standard is critical in ensuring the safety of various electrical and electronic products. It is widely applied across industries to assess the...
Abstract Mechanical impact testing is a critical part of assessing the durability and robustness of various products. This paper explores the application of the spring tester...
Introduction The IP65 test is a critical procedure for determining the effectiveness of enclosures in protecting internal components from environmental factors such as dust and water....
The needle flame test is a critical method used to evaluate the flammability of electrical and electronic equipment, as well as insulating materials, plastics, and solid...
In various industries, understanding the durability and resistance of materials to corrosive environments is essential. One common method to evaluate this is the salt contamination test,...
Introduction ASTM B117 salt spray testing is one of the most widely used methods for assessing the corrosion resistance of materials and coatings. It simulates harsh...
Introduction Electrostatic discharge (ESD) is a critical concern in modern electronics and industrial equipment. ESD testing ensures that products are resilient to electrostatic interference, which can...
Water resistance testing is a critical method for evaluating the durability and performance of materials and products in corrosive environments. The salt spray test, specifically, is...
Salt spray testing is a crucial method for evaluating the corrosion resistance of materials and coatings. This paper explores the fundamental principles of salt spray tests,...
Electromagnetic compatibility (EMC) testing plays a crucial role in ensuring the safety and reliability of electronic devices. The EFT (Electrical Fast Transient) test is a vital...
Abstract Waterproof testing is crucial in ensuring the safety and functionality of electrical and electronic products in wet and humid conditions. This paper explores the principles,...
Abstract Electrostatic Discharge (ESD) is a significant threat to the reliability of electronic and electrical devices. The electrostatic discharge tester, particularly the LISUN ESD61000-2 ESD Simulator...
Abstract The salt mist test, a critical assessment method for evaluating the corrosion resistance of materials, plays a vital role in ensuring the durability and reliability...
Abstract Ingress Protection (IP) testing is crucial in determining the durability and reliability of electronic devices and components exposed to environmental factors. The LISUN JL-X IP...
Introduction In modern electrical and electronic systems, ensuring robustness against voltage surges, especially those caused by lightning strikes or switching operations, is crucial. The LISUN SG61000-5...
Electrical safety is paramount in the design and manufacturing of modern electronic devices. To prevent fire hazards and ensure product reliability, manufacturers must conduct rigorous testing...
Hong Kong, October 27-30, 2024 – LISUN is excited to announce its participation in the 2024 Hong Kong Lighting Exhibition from October 27th to 30th. As...
In today’s highly competitive electronics market, product durability and reliability are critical factors that can determine a product’s success. As consumer demand for waterproof and weather-resistant...
As technology advances and electronic devices become more ubiquitous, the impact of lightning surges on electronic equipment is garnering increasing attention. Lightning surges, which refer to...
Electrostatic Discharge (ESD) Immunity Testing Electrostatic discharge (ESD) immunity testing is a crucial aspect of electromagnetic compatibility testing. The national standard for ESD immunity testing is...
Waterproof test chambers are critical tools for evaluating the water resistance of household, commercial, and industrial electrical and electronic equipment. These chambers adhere to international standards...
Principle of Operation of the Leakage Tracer Tester The operation principle of a leakage tracer tester primarily involves insulation quality testing and leakage current testing of...
Overview The salt spray test chamber is primarily used for conducting corrosion tests to ensure the quality of ferrous metals and their coatings. This test is...
Overview Ball Pressure Test (Resistance to Heat) is a critical experiment for evaluating the heat resistance performance of insulation materials, primarily used to support and protect...
The Impact of Salt Spray on Electronic Products and Mitigation Measures Salt spray is widely present in marine, atmospheric, terrestrial, lake, and river environments, inevitably exposing...
A surge, also known as a transient voltage or spike, refers to the phenomenon of voltage exceeding the normal operating voltage for a brief moment. Essentially,...
Salt Spray Test Chamber: Testing Standards Salt spray test is an environmental test that evaluates the corrosion resistance of products or metal materials by simulating a...
Overview Glow Wire Testing is a crucial method for evaluating the stability of electronic appliances during operation. By simulating high-temperature conditions resulting from electrical faults, this...
An Electrostatic Discharge (ESD) generator is a testing device designed to simulate electrostatic discharge events. They play a crucial role in electronic device testing, aiding engineers...
An electrostatic discharge generator is a device used to simulate and test the tolerance of electronic devices and systems to electrostatic discharge (ESD) environments. By simulating...
The electrostatic discharge generator is a specialized device utilized to simulate and assess the resilience of electronic devices under electrostatic discharge (ESD) and similar electrostatically related...
With the continuous development of technology and the improvement of people’s living standards, electronic products and mechanical equipment have become an indispensable part of daily life....
The needle flame test and the glow wire test are both used to assess the fire resistance of materials, but they differ in their testing principles...
What is Electrostatic Discharge (ESD)? Electrostatic Discharge (ESD) is one of the common sources of interference in electronic devices. According to the national standard GB/T17626.2 (equivalent...
Introduction: The spring impact hammer, also known as a spring impactor, is an instrument used for impact testing. It releases a specific amount of impact energy...
Introduction: Leakage tracking test equipment plays a pivotal role in the production and quality supervision of electrical products. Understanding the concept of leakage tracking test equipment...
Corrosion testing is widely employed in quality assurance laboratories within the metal industry as a critical step in quality control testing. These tests are typically conducted...
In-depth Analysis of Pressure Testing Methods and Standardization Guidelines Operation Steps and Methods of Ball Pressure Testing: 1. Sample Pressure Treatment: Place the sample under the...
In-Depth Analysis of Ball Pressure Test Apparatus and Standardization Guidelines of Ball Pressure Test Ball Pressure Test Procedure and Methods: • Sample Pressure Treatment: Place the...
What application of Glow wire tester? Glow wire tester is a widely used method for assessing the flammability of plastic sheets or components. This testing procedure...
1. General 1.1 Scope and object This International Standard specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard...
I. Introduction of Surge Generator Surge generators are important equipment in electrical systems. Their main function is to simulate high-voltage pulses or instantaneous voltage fluctuations to...
This article briefly explores the causes and consequences of ESD and EMI in mobile audio systems. It then discusses the use of ESD suppressors and EMI...
Introduction Surges, also known as sudden voltage spikes, pose a significant threat to electrical systems because they have the potential to inflict damage to sensitive gear...
Waterproof test machine is applicable to a wide range of products, including but not limited to electronic components, outdoor lighting fixtures, automotive accessories, communication equipment, cabinets,...
According to the working principle of the simulated surge generator used in electromagnetic compatibility tests and lightning surge generator test, combined with the commonly used 8/20...
I. Introduction EFT Immunity Measurement is an interference simulation generator for electronic products and is an instrument for the quick transient burst pulse anti-interference test, as...
Solid insulation materials may form some conductive paths under the joint action of electric field and electrolyte, that is, leakage discharge traces may occur, and the...
What is A Ball Pressure Test Ball Pressure Test is a safety regulation test to examine the heat-resistance performance of product materials. The temperature of the...
The IK spring impact hammer is a tool used to test the protection level of electrical equipment enclosures. According to the International Electrotechnical Commission (IEC) standards,...
I. Standard for Surge Generator of Electronic Devices The national standard for electro-equipment surge generator is GB/T17626.5 (equivalent to international standard IEC61000-4-5). Surge Generator SG61000 5...
Hot wire testing is a common method used to evaluate the flammability of materials. The Glow-wire Test Apparatus is the main tool used for this type...
Lightning and surges are common problems in power systems, especially in high-voltage power equipment. To protect equipment from the impact of lightning and surges, we need...
The electrostatic discharge generator is a device used to generate a high-intensity electrostatic field and induce electrostatic discharge phenomena. Electrostatic discharge is a process of charge...
Static Discharge Gun, is also known as ESD Simulation.With the continuous development of automotive electronic technology, the impact of electrostatic discharge on automotive electronic devices is...
The glow-wire tester is used to simulate the ignition of insulation materials or other combustible components inside equipment that may catch fire due to a hot...
LISUN, a leading provider of lighting testing and measurement solutions, is excited to announce its participation in the International Trade Show of Lighting Equipment Light 2024...
With the continuous development of modern society, there is increasingly high demand for the safety and reliability of electrical equipment. This is particularly true in the...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
What is a Waterproof Jet Test Device? IPX56 Waterproof Jet Test Device, is an open waterproof test equipment that belongs to the IPX56 standard. It is...
Dubai, 16th-18th, January, 2024 – LISUN will participate in the Lighting Exhibition held in Dubai from January 16th to 19th, 2024. As a leading global supplier...
Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected by...
Introduction Data centers house many servers, networking devices, and crucial data storage systems, and are therefore essential to the current IT architecture. Access to digital services...
The IPX7 Immersion tank Waterproof test Device is mainly used to test the physical and other related properties of electronic products, electrical products, lamps, electrical cabinets,...
The ipx4 Swing Pipe Water Spray Test Equipment is a waterproof performance testing equipment widely used in electronic and electrical engineering, communication, lighting, automobile and other...
In the modern society where waterproofing is ecoming more ubiquitous, more manufacturers are developing consumer products with various waterproof testing equipment. The purpose is to meet...
IPX7 Immersion tank Waterproof test Device, also known as rain test chambers, waterproof testing equipment, waterproof detectors, waterproof testing machines, IP waterproof testing machines, etc., are...
With the popularity of smart devices and increasing demands for waterproof and dustproof features in devices like smartphones and watches, waterproof and dustproof technologies have received...
Introduction: Despite the widespread belief that electrostatic discharge or ESD guns are exclusively useful for testing electronics, this is not the case. Electrostatic discharge (ESD) guns...
Introduction The Glow Wire Test is a standard procedure for determining the combustibility of electrical insulation. It’s vital to the security and dependability of electrical and...
BS-EN-61032, this International Standard specifies details and dimensions of test probes intended to verify theprotection provided by enclosures with regard to: – protection of persons against...
Electrostatic discharge (ESD) is a quick (nanosecond) physical discharge of static electricity to electronic components and parts. This discharge should be considered as a type of...
The static electricity generated by the human body to an object or between two objects may cause the circuit of electrical and electronic equipment to malfunction...
Introduction The need for a robust charging infrastructure is of critical importance as the number of people driving electric cars (EVs) increases. Charging stations for EVs...
The burst generator is also called burst tester, is a kind of EMI filter, and its name comes from the “Electrical Fast Transient/burst” (abbreviated as EFT)...
From October 27th to October 30th, 2023, LISUN participated in the world -renowned Hong Kong International Lighting Fair（Autumn Edition）. This exhibition is an important event in...
Introduction: Internet of Things (IoT) gadgets have altered many different industries by connecting previously separate items, making it possible to share data, and introducing novel possibilities...
IEC ball pressure test is a special kind of Potting test, which is used to test the insulation resistance and shell protection insulation strength of the...
Introduction Electronics and electrical systems have become more important in the contemporary automobile industry. The components, including the engine control unit, the infotainment system, the safety...
Introduction Testing materials and coatings with salt spray is a common and accepted way to gauge their resistance to corrosion. Various organizations have set particular criteria...
LISUN EFT61000-4 EFT immunity tester is specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS...
Introduction Because of their low operating costs and positive effects on the environment, renewable energy sources like solar and wind power have become more popular in...
Introduction The reliable operation of medical equipment in healthcare facilities is critical to ensuring both the high standard of care that is provided to patients and...
Introduction In industrial settings, the reliability of the equipment and technology plays a significant role in the maintenance of production as well as the reduction of...
I. Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected...
What is the Electric Discharge? This should be the main culprit that causes all electronic components or integrated circuit systems to cause excessive electrical stability damage....
Introduction The widespread damage and disruption that lightning strikes may cause to infrastructure and equipment makes them a serious risk. By modeling and evaluating surge events...
The electrostatic discharge generator is a device used to generate a high-intensity electrostatic field and induce electrostatic discharge phenomena. Electrostatic discharge is a process of charge...
Electrostatic discharge (ESD) is a common phenomenon that occurs when two objects with different electrical potentials come into contact or are separated. The discharge can cause...
Introduction Connectivity and data transmission over great distances are made possible through telecommunication networks, which form the backbone of today’s communication systems. Maintaining these networks dependably...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
The Salt Corrosion Test is a method that uses a test device called a “Salt Spray Corrosion Test Chamber” with a certain volume space to assess...
The electrostatic discharge generator is a device used to generate a high-intensity electrostatic field and induce electrostatic discharge phenomena. Electrostatic discharge is a process of charge...
The IPX8 Immersion tank Waterproof test Device is applied to electronic components, outdoor lighting fixtures, mobile phone casings, automotive accessories, etc. It is a test that...
Surge Impulse Generators are devices specifically designed to simulate lightning strikes and are widely used in testing and research of electrical equipment. They are capable of...
With the development of power system, lightning surge has become increasingly important on the influence of power equipment and power system. Lightning surge is a transient...
LED lighting fixtures are being used more and more extensively indoors and outdoors, and their waterproof performance has become an important consideration for users. LED waterproof...
A salt spray test chamber is used to assess the corrosion resistance of the tested samples by subjecting them to salt spray corrosion. Salt spray refers...
With the rapid development of electronic products, how to ensure the strength of electronic components is not only valued by manufacturers and consumers, but also increasingly...
What is a surge tester: A surge tester is a device that produces high voltage and high current transient pulses to simulate a lightning strike and...
Introduction It is necessary to have electromagnetic compatibility (EMC) in order for electronic equipment and systems to perform in a reliable manner and free from interference....
Testing Flammability with Glow Wire Test Apparatus and Needle Flame Apparatus is used to determine if a substance can be ignited and pose a risk of...
I. Introduction of Salt Spray Test Corrosion testing is widely adopted and used for quality control testing in the metal business quality assurance laboratories. The mentioned...
Introduction: Electrostatic discharge (ESD) guns are high-tech instruments for performing electrostatic discharge (ESD) testing to determine the reliability and durability of electronic components and systems. Their...
Introduction The automobile sector has a tremendous issue from corrosion, which reduces vehicle longevity, efficiency, and safety. Corrosion testing is an essential part of ensuring the...
Introduction Electrical systems play a crucial part in preventing fires, which is why they are of utmost importance in buildings. The danger of electrical fires may...
What is Salt Fog and Salt Spray Testing? Salt Fog and Salt Spray Testing is a kind of environmental test, mainly used to evaluate the corrosion...
The appearance of the IPX34 Swing Pipe Water Spray Test Equipment and the test chamber shell are made of blue and white paint. They have evolved...
The Needle Flame Test is the main test item for testing whether electronic products and materials are inflammable. It simulates the flame generated by overheating of...
Introduction: When testing electronic components and systems for performance and reliability, electrostatic discharge (ESD) guns are necessary. While the ESD gun is the primary tool, there...
Introduction In order to guarantee the dependability, safety, and performance of surge generators, it is essential that they correspond to international standards in the field of...
1. Test standards for electronic equipment lightning waves The national standard of the lightning waves of electronic equipment is GB/T17626.5 (equivalent to international standard IEC61000-4-5). The...
Introduction: To measure the efficiency and durability of electronic parts and systems, electrostatic discharge (ESD) testing relies heavily on ESD guns. Understanding and following suitable calibration...
IP Waterproof Testing Device is a high-precision testing tool for testing waterproof performance, airtightness and sealing of products. It has the advantages of precise testing and...
Introduction By replicating real-world fire events and assessing the combustibility of various materials, the Glow Wire Test equipment is an indispensable tool for detecting potential fire...
Introduction Electronic devices in today’s high-tech world can’t function at their best without consistent, clean electricity. However, power quality may be negatively impacted by electrical disturbances...
The IPX12 drip test box has the characteristics of circulating water in its box structure: for testing, it is both energy-saving and environmentally friendly. More importantly,...
Waterproof Rain Test Chamber is an advanced device used to simulate atmospheric environment, so the safe use and correct operation of it is very important. So,...
Introduction: When evaluating electronic components for performance and reliability, electrostatic discharge (ESD) guns are necessary. Keeping your ESD gun in tip-top shape is essential for getting...
The static electricity generator is a generator for giving static electricity to objects. When used, it is required to be grounded to the ground, otherwise it...
Introduction The Glow Wire Test device is an essential piece of equipment for conducting fire safety tests on a wide range of materials. The capabilities and...
Introduction Product development and quality assurance in many sectors cannot proceed without extensive environmental testing. Manufacturers may test the performance, durability, and resistance to deterioration of...
The terms electromagnetic compatibility (EMC) and electromagnetic interference are often used interchangeably when talking about the testing of commercial electronic goods and products. Because the two...
Introduction: The use of electrostatic discharge or ESD guns has become standard practice for testing the reliability of electronic components and systems against ESD attacks. New...
In our lives, powerful currents are generated due to lightning strikes or sudden closing of large power station switches, which can cause great damage to our...
Introduction A crucial part of fire risk assessment is glow wire testing, which is a useful method for analyzing the fire behavior and safety capabilities of...
Salt spray testing machine is a kind of testing device used to simulate corrosive environment containing salt gas, to evaluate the anti-corrosion performance of different materials,...
I. Surge Test Equipment Standard The national standard for surge voltage tester is GB/T17626.5 (equivalent to the International Standard IEC61000-4-5). The standard mainly simulates various cases...
I. Definition of Glow Wire Test The Glow Wire Tester is used to test the stability of electronic appliances when working. The hot thread itself is...
The upgraded Tracking Test Chamber according to the new standards GB/T4207-2022 can accurately and precisely measure the specific electrical tracking indexes and comparative electrical tracking indexes...
Introduction To keep up with the rising electrical needs around the globe, power plants are essential. Power plants need to have sturdy mechanisms in place to...
Introduction The evaluation of electronic products’ resistance to water, the assurance of their longevity, and the fulfillment of customer expectations are all facilitated by waterproof testing...
I.Electric equipment’s reaction to lightning surge Most people are familiar with the existence of a lightning surge voltage test. It is mainly used to evaluate the...
The IPX12 drip box consists of a Waterproof Test Equipment, a Waterproof Test Machine , etc. It uses the form of drip to carry out IPX1/2 waterproof...
In order to assess the electrostatic discharge (ESD) immunity of electronic devices and systems, GB/T17626.2-2006 is a newly released standard in China. The ESD test is...
Introduction: In electrostatic discharge (ESD) testing, electrostatic discharge (ESD) guns are used to determine how vulnerable electronic components and systems are to ESD. Protecting both people...
Introduction The Glow Wire Test is an essential tool for gauging the safety of electrical and electronic components in the event of a fire. This test...
IPX7 Immersion tank Waterproof test Device indicates that the waterproof grade of the product is 7. When the product is immersed in water for a short...
Lightning surge damage to electronic/power equipment has been a topic of concern around the world. In this regard, many electronics engineers have developed various lightning surge...
The needle flame test is the main test item to verify whether electronic products and materials are flame retardant. It simulates the small flame that may...
Introduction In the realm of electrical engineering, surge generators play a crucial role in simulating controlled surges and transient occurrences. These units have a number of...
What is a lightning surge simulator: Lightning surge simulator is a device that can generate high voltage and high current transient pulses, used to simulate lightning...
The esd generator gun is an important equipment in electromagnetic compatibility measurement and testing for electrostatic discharge immunity testing. You have encountered static electricity energy in...
The glow wire test apparatus simulates that parts of insulation materials or other solid combustible materials that are prone to flame propagation inside the equipment may...
Glow wire testing can be used to assess fire protection in electrical equipment. It is intended to simulate what an over-heated component may cause a fire...
Introduction The success of a mission, the efficiency of operations, and the safety of military personnel all depend on the dependability of sensitive electronic equipment. Military...
The needle flame tester is applicable to the research, production and quality inspection departments of electronic equipment and its parts and components, such as lighting, low-voltage...
ESD generator ESD61000-2 is specially designed for the characteristics and requirements of electrostatic immunity test. Its performance meets the latest IEC (International Electrotechnical Commission) standard IEC61000-4-2,...
Introduction In today’s technologically advanced society, electrical gadgets are often exposed to the elements, including water. Manufacturers put items through waterproof testing to guarantee they can...
What is the waterproof standard of the immersion tank waterproof test device: The IP (INGRESS PROTECTION) protection level system was drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION),...
The IPX5 and IPX6 waterproof testing machine is also known as IP waterproof testing equipment. Handheld water sprayers, flushing testing machines, etc. are an open waterproof...
Introduction: When conducting ESD testing to determine the reliability of electronic components and systems, electrostatic discharge (ESD) guns are necessary. Regular ESD gun calibration is necessary...
What is a Glow Wire Test? The glow wire test is to test the stability of electronic and electrical products when they are working. The glow...
Introduction: The reliability of electronic components and systems against ESD occurrences is largely determined by the results of ESD testing. During testing, electrostatic discharge (ESD) guns...
Introduction Due to the fact that the durability and reliability of electronic devices are directly proportional to their level of water resistance, IP waterproof testing equipment...
The needle flame test equipment is suitable for testing the flame retardant performance of electronic components, electrical components, mechanical components, injection molded parts, and other electrical...
Why should there be IP waterproof grade test? IP waterproof test equipment can also be called as rain test chamber, waterproof detector, waterproof test machine, IP...
Introduction Surge generators are very important in the field of electrical systems because they guarantee the steady and secure functioning of machinery and buildings. These gadgets...
What is a surge tester? Surge tester “is an advanced high-voltage power supply and measurement unit composed of programmable pulse sequences and advanced mode analysis software....
Introduction The Glow Wire Test is a standard for measuring the fire safety of electrical and electronic devices. The Glow Wire Test is one example of...
Waterproof testing is mainly aimed at electronic products and equipment that are used outdoors or in harsh environments. It simulates the rainwater environment under different weather...
LISUN’S waterproof test equipment is divided into 1-9 levels of waterproof grade, including IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8, and IPX9 general waterproof grade...
Introduction Risk assessment is very important in the field of electrical systems since it helps guarantee the dependability and resilience of essential infrastructure. Risk assessments cannot...
What is the working principle of the water pressure waterproof test Air tightness waterproof test can be divided into many kinds, according to the detection method,...
What is Glow Wire Testing? Glow Wire Testing is used to test the stabilities of electronic and electrical products when in operation. The glow wire itself...
Introduction There is an urgent need for electrical equipment that is resistant to water. It is necessary to have IP waterproof testing equipment in order to...
1. Briefly Interpretation of Cyclic Corrosion Test The cyclic corrosion test method is a newly developed method which can reflect the influence of natural environment exposure...
Introduction: Testing for electrostatic discharge (ESD) is essential for guaranteeing the quality and functionality of electronic parts. However, engineers face a number of obstacles while conducting...
The working principle of the salt spray chamber: Corrosion is the damage or deterioration caused by the action of the environment on a material or its...
1. How to Purchase Waterproof Test Equipment Waterproof test equipment refers to instruments capable of carrying out various waterproof performance tests, including pressure testing, performance testing,...
Introduction The Glow Wire Test apparatus is a flexible instrument for testing the fire safety of a wide range of electrical and electronic items. It has...
I. Application scope of needle flame test apparatus: The needle flame test apparatus is suitable for the research, production and quality inspection of lighting, low voltage...
Introduction The capability of essential infrastructure to withstand damage during times of crisis is of paramount importance. During these times, electrical and electronic equipment are more...
Salt is a ubiquitous compound, which not only exists in the ocean, atmosphere, land surface, lakes and rivers, but also causes machinery or electronic products to...
Waterproof tester, also known as rain test boxes, rain testing machines, etc., is used to test the waterproof performance of appliances or appliances with rainproof functions....
The Waterproof Test System is mainly used for waterproof testing or sealing testing of complete electronic products or components. Using compressed air for testing is a...
Introduction As more and more of our daily lives revolve on electrical gadgets, it’s more important than ever to keep them safe against water damage. It...
Salt spray test chamber is also called salt spray testing machine, which is called salt spray testing machine in full, and is mainly used to test...
Introduction: Advances in ESD gun technology have been crucial in assuring the dependable functioning and safety of electronic equipment in an industry where electrostatic discharge (ESD)...
Introduction The corrosion resistance of materials and coatings may be evaluated using a variety of methods, two of the most common of which being salt spray...
Introduction When it comes to ensuring the reliability and safety of electrical and electronic products, certifications and compliance play a critical role in meeting applicable standards....
The flame test is one of the commonly used methods to evaluate the fire danger of electrical and electronic products. GB/T 5169.5-2020 “Test Fire Five –...
I.Electric equipment’s reaction to lightning surge Most people are familiar with the existence of a lightning surge generator. It is mainly used to evaluate the surge...
Introduction Voltage spikes, also known as transient overvoltages, pose a particular threat to electrical and electronic equipment because of their susceptibility to them. These sudden increases...
ESD is the abbreviation of Electrostatic discharge, which stands for electrostatic discharge. It refers to a sudden electric current between two objects with different electric potentials....
Lightning is a serious natural disaster, which can seriously endanger the normal operation of communication equipment, computer network systems, and power systems, causing direct and indirect...
The origin of the EFT pulse generator： In industrial process measurement and control devices, when the inductive load is disconnected, a transient pulse group (string) of...
Introduction When it comes to electronics, liquid damage is a major concern that may compromise their performance and lifespan. Manufacturers use IP waterproof testing to determine...
Waterproof testing is used to verify the effectiveness of protective covers, shells, and sealing washers that prevent water from penetrating the product; Check the ability of...
The Glow-wire Tester is used to test the stability of electronic and electrical products during operation, and the flame retardant performance of electronic products in the...
Introduction Electrostatic discharge (ESD) is a major threat to electronics, since it may cause malfunctions, lower dependability, and higher warranty costs. Electronic components must undergo rigorous...
Introduction In today’s technologically advanced society, electronic gadgets are ubiquitous and deeply ingrained in our everyday lives. As our reliance on electronic devices continues to grow,...
Electrostatic discharge (ESD) is a common problem in the electronics industry. It occurs when two objects with different electrical potentials come into contact, causing a sudden...
Introduction Protection against voltage surges and transient disturbances is of critical relevance in today’s society, when electronic gadgets and sensitive equipment are widespread. There are two...
Introduction The Glow Wire Test gadget is a cutting-edge piece of apparatus that is used in the process of determining whether electrical and electronic products are...
Introduction The protection that surge generators provide for sensitive electronic equipment against unexpected spikes in power is an incredibly vital function that these generators provide. These...
Durability and dependability of products under extreme circumstances is a top priority in the field of product testing. Products, from electronics and automobile parts to outdoor...
Introduction: The need for reliable protection against electrostatic discharge (ESD) is growing as the pace of technological advancement continues to set new records. When electronic equipment...
Introduction: The protection offered by electrical and electronic goods is of the highest significance. In order to provide assurance that the objects are resistant to fire,...
Introduction: The outcomes of impulse voltage testing have a significant impact on the degree to which electrical components and insulation systems can maintain their authenticity and...
Introduction The rapid development of technology has made electronic gadgets indispensable to modern living. We depend significantly on technology like smartphones, tablets, wearables, and smart home...
Electrostatic discharge (ESD) is a major issue in electronics production. This is because electrical components might be damaged beyond repair by electrostatic discharge (ESD). Electrostatic discharges...
The Swing Ppe Water Spray Test Equipment is divided into three types: ipx34 shower rain tester, open type and box type. The spray nozzle uses special...
IP (Ingress Protection) protection grade system is drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION), which classifies electrical appliances according to their dust-proof and moisture-proof characteristics. The IP...
In addition to the selection and circuit design of components, good printing circuit board (PCB) design is also a very important factor in electromagnetic compatibility. The...
With the development of electronic technology, household electrical products are becoming increasingly popular and electronic, and the increasingly developed radio, television, post and telecommunications and computer...
What is the waterproof jet test device? The waterproof jet test device can also be called IPX56 test device, hand-held water sprayer, flushing test machine, etc....
Waterproof test equipments is used to test the waterproof performance of appliances or appliances with rain-proof function, so that the product may be exposed to water...
Waterproof test equipments, also known as rain test box, rain test machine, etc., is used to test the waterproof performance of appliances or appliances with rain-proof...
Accidents such as natural disasters have gradually entered our lives, such as floods, mudslides, heavy rains, and other natural disasters may occur around us. For such...
IPX7 immersion tank waterproof test device is divided into two types, one is stainless steel immersion test device 1; One is a glass-type immersion test device...
Introduction Surge generators have become an essential tool for testing and evaluating the efficacy of various surge protection technologies for electrical systems. To keep up with...
What is the waterproof grade of IPX34 Swing Pipe Water Spray Test Equipment: IPX3 Swing Pipe Water Spray Test Equipment : spray holes are arranged in...
Waterproof test equipment, also known as rain test box, waterproof test device, rain test machine and other different names, can provide lifelike simulation of electronic equipment...
Waterproof test equipments can also be called as rain test box, ip waterproof testing machine and other names. It uses various detection methods such as simulated...
Waterproof test equipment can also be called waterproof detector, rain test box, waterproof testing machine and other different names. It can provide lifelike simulation of electronic...
Waterproof test machine is to test whether the product has waterproof performance by simulating the performance of electrical components and various products that may be drenched...
IPX5 and IPX6 waterproof test equipments are waterproof tests of two different levels. However, in LISUN, the two waterproof levels are combined into an IPX56 water...
All electronic products need to consider fire risk and potential fire hazards when designing. The design of components, circuits, products, and materials of materials need to...
The waterproof jet test chamber, as its name implies, is a waterproof test equipment with the appearance of a box type. It is mainly used to...
The IPX7 waterproof test chamber, also known as the immersion test machine, the soaking test box, the IPX7 waterproof equipmen is mainly used to test the...
Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the...
What is the ipx7 waterproof test chamber? The ipx7 waterproof test chamber, also known as the immersion test machine, the waterproof test equipment, the ipx7 waterproof...
What is surge immunity test? Lightning strike and switching operation of power distribution system will produce transient overvoltage, which will cause monopolar transient interference to electrical...
Products that have been painted, electroplated, covered with an inorganic or organic layer, handled an anode, treated with anti-rust oil, etc., may be put through their...
With the development of power systems, the impact of lightning surges on power equipment and power systems is becoming increasingly important. Lightning surges are transient high...
In the context of modern technological development, electrostatic discharge technology has been widely applied. As an important equipment for electrostatic discharge experiments, electrostatic discharge generators can...
Surges are a nightmare for any circuit designer and a very important aspect of electronics. These spikes are frequently referred to as “impulses,” which are high...
The drip box consists of a vertical drip tester, an IPX12 drip test chamber, etc. It uses the form of drip to perform IPX1/2 waterproof test...
IPX1 waterproof test operation skills: 1. After plugging in the power switch, press the red button on the operation panel to start the control system; Then...
A salt spray chamber is a useful piece of machinery to evaluate how well a substance or coating holds up against corrosion. The instrument is often...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
IPX12 drip tester has many names, such as rain drop testing instrument, rain drop testing machine, etc. The frame of IPX12 drip tester is composed of...
The glow wire test apparatus investigates the fire-resistant properties of raw materials and finished components. LISUN’s glow wire test equipment has been ergonomically designed to meet...
The needle flame test is used to evaluate the fire danger produced by tiny flames, which may arise from the ignition of a malfunctioning component of...
IP grade waterproof testing instrument is a grading standard of IP waterproof testing equipment, which is used to determine whether the IP waterproof of products meets...
IPX56 waterproof jet test device is composed of chassis and turntable, which can be placed separately, and movable casters are installed at the bottom of chassis...
The glow wire test is a physical experiment. The purpose is to test the stability of electronic and electrical products at work. The glow-wire tester heats...
IK ratings are defined as IKXX, where “XX“ is a number from 00 to 10 indicating the degrees of protection provided by enclosures (including luminaires) against external mechanical...
1. The mechanism of EFT Immunity Measurement and its impact on electronic products The EFT immunity tester is a transient disturbance generated at the disconnection due...
Since the birth of the world’s first semiconductor light emitting diode in the 1960s, LED lighting has been known as the light of hope in the...
An immunity test called EFT Immunity Measurement (EFT61000-4) is used to evaluate how well electrical and electronic equipment performs when subjected to interference. A device is...
What is the Surge Test? The surge (impact) immunity test is to simulate the effects of lightning strikes (indirect lightning) in nature and voltage changes caused...
What is EMC test: EMC refers to the ability of equipment or system to operate in accordance with the requirements in its electromagnetic environment without causing...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
The salt spray test standard specifies the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value, and also puts forward...
Testing purposes? GB/T 17626.5-2008 / IEC 6100-4-5:2005 standards specify the immunity requirements of equipment to unipolar surges (impacts) caused by switching and lightning transient overvoltages. The...
Needle flame test and glow wire test test description Needle flame test and glow wire test are both tests used in the electrical and electronic product...
1. Countermeasures and rectification measures for common problems in ESD immunity testing 1.1 The mechanism of electrostatic discharge formation and its harm to electronic products Static...
I. Salt spray test chamber| Salt spray testing simulates a corrosive salty environment in the laboratory. It is used to speed the testing of surface coatings’...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
A unique testing tool used in laboratories is the tracking test device. The Tracking test device is used to gauge a surface’s resistance to a leakage...
As a type of reliability test equipment, environmental test has developed into a method to predict how the product use environment affects the performance and function....
What is Ingress Protection testing? An enclosed product’s resistance to liquid and particle infiltration is assessed during ingress protection testing. Depending on the achieved resistance to...
How is ESD static electricity generated? Due to external effects such as friction or in the form of various energies such as kinetic energy, potential energy,...
ESD simulator An ESD simulator, often known as an ESD gun, is a portable device that is used to evaluate the resistance of devices to electrostatic...
Worldwide, enclosures and control cabinets are utilized in a variety of settings and must adhere to the tightest safety standards. A crucial role is played in...
Salt spray test is a clear and specific regulation of salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value. In...
The SG61000-5 surge generator from LISUN offers a standard framework for assessing how well various equipment’s internal connections and power cords withstand high energy transient interference...
Working Principle of Surge Generator SG 61000-5 The SG 61000-5 standard is based on immunity criteria. It defines the test techniques as well as the standard...
Why Is ESD Testing Important? Monitoring the efficiency of your tools is crucial while trying to maintain an Electrostatic Protected Area (EPA). The most recent ESD...
The salt spray corrosion test chamber measures the product’s resistance to salt spray corrosion as well as the material’s and its protective layer’s salt spray corrosion...
The LISUN IP waterproof test machine is widely used in the authentication test organization for products such as electrical & electronic products, and LED luminaires as...
ESD testing, also known as electrostatic discharge testing, is crucial for many goods. The sudden exchange of electricity between electrically charged things is known as ESD....
Additionally known as the lightning surge immunity test, combination wave generator, surge current/surge voltage generator, and combined surge voltage and current generator, the LISUN SG61000-5 completely automatic...
A salt spray test or salt fog test is a corrosion method for checking the corrosion resistance of the materials and coatings of the surface. The...
Environmental test equipment is the general name of all test chambers simulating natural climate environment. Representative products include salt spray test chamber, high and low temperature...
In any high voltage and electrical noise system, ESD immunity is an important aspect of EMC and a key consideration in the selection of current isolation...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
Electrostatic Discharge Electrostatic Discharge (ESD) is defined by the IEC as “a transfer of electric charge between bodies of varying electrostatic potential in proximity or through...
Lightning is a kind of discharge phenomenon between thunder clouds or between thunder clouds and the earth in nature It is characterized by high voltage, large...
IEC 61000-4-2 compliance test standard for electrostatic discharge immunity has voltage levels of 2,000 to 15,000 Volts. The electrostatic discharge simulators or “ESD Guns” produce voltage...
The most of luminaires manufacturers are requested to do IK level test (Impact Protection). LISUN can supply the IK test instrument: IEC62262 Impact Protection Tester |...
What Does Salt Spray Testing Mean? An accelerated corrosion test called the salt spray test is used to compare the corrosion resistance of materials that have...
By evaluating the degree of protection given against mechanical incursion, dust, accidental touch, and water into casings and enclosures, ingress protection (IP) testing lowers the risk...
An electrostatic discharge generator gun, or ESD stimulator gun , is an instrument widely used for ESD testing. Due to its portability and compact size, an...
Over voltages are a common source of damage in industrial electronic systems. It has been discovered as technology has advanced. Air discharges can also cause over...
ESD is a science formed since the mid-20th century to study the generation and attenuation of static electricity, electrostatic discharge model, electrostatic discharge effect and electromagnetic...
After in-depth study on the three main forms of direct lightning strike, conducted lightning strike and induced lightning strike, people have established the theory of lightning...
The EFT61000-4 EFT immunity tester is specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS...
ESD simulator guns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. ESD61000-2_Electrostatic Discharge Simulator What is a ESD test? The...
There are multiple methods for the evaluation of flammability and fire resistance of the material. They are usually direct flame and indirect flame methods. ”Direct Flame...
There is no doubt that safety is a paramount concern in any industry. That’s why at LISUN, we focus on ensuring the highest level of safety...
Electricity discharge may cause electronic products such as mobile phones, electronic products remote control, smart locks, smart LED lighting systems, etc., or e -components, IC chips,...
LED lighting products are rapidly replacing traditional lighting products due to their superior luminous performance and high efficiency and energy saving. With people’s continuous pursuit of...
ESD simulatorguns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. In a dry environment, the human...
The SG61000-5 fully automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator)...
IEC 62262 IK protection test means that electrical equipment housings are protected against external mechanical collisions, and the IK standard applies to rated voltages not exceeding...
Meta Description: Surge generators are used for producing the high-voltage pulses, by charging the capacitors in parallel and discharging them in the series combination. This article...
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < basic testing methods of Glow wire, basic testing...
The ZY-3 Needle Flamp Test apparatus is mainly used for testing lighting equipment, low-voltage electrical appliances, household appliances, power tools, electronic instruments, electronic meters, etc. Additionally,...
The SG61000-5 fully automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator)...
The safety of electronic devices is the most important part of the various elements that determine their quality. The safety parameters include the following parameters: AC/DC...
LISUN’s Salt spray test chamber The Salt spray test Chamber is used to conduct salt spray corrosive tests on components, parts, electronic and electrical components, metal...
Surge tests are considered critical because they are known best for finding turn-to-turn insulation weaknesses. These weaknesses begin at voltages above the operating voltage of the...
What is a Salt Spray Test? The salt spray test is a generalized test method used to check the coated samples’ corrosion resistance. During the salt...
What is a Water proof test? Waterproof is the ability of any material to resist water and moisture. To be classified as waterproof, the material should...
What is a Surge Generator? The SG61000-5 surge generator by LISUN provides a standard platform for testing the resistance of diverse equipment’s power cords and internal...
Most electronic and other device manufacturers use the IP (Ingress Protection) scale, which ranges from 1 to 8. IPX1 is the lowest level of waterproofing, indicating...
What Instrument can be used for testing impact of environment on different products? The Salt Spray Test Chamber is a piece of environmental testing equipment that...
What is ESD Testing? A crackling sweater hair that sticks straight out from your head, a small electric shock from a door handle. We are more...
The ESD test is used to determine the durability of electronic devices when electrostatic discharge occurs when a person touches them. These tests can be conducted...
Surges are a concern for every circuit developer since they are key problems in electronics. These surges are known as impulses. Impulses have the distinct characteristics...
What is a ball pressure test? Under the action of high temperature, the structural properties of non-metallic materials and insulating materials will change greatly, and this...
What is a power surge? Power surges are abnormally high voltage spikes occurring on the AC power. Their short duration, high energy events indicate that they...
What is the needle flame test The full name of IEC 60695-2-2 is Fire hazard testing Part 2: Test methods – Section 2 Needle flame test....
What is the glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for providing resistance to abnormal heat and fire tests on the lighting lamps,...
Security is critical in the home appliance business. The purpose of fire safety rules is to assess and rate the flammability of materials used in appliance...
Salt Spray Test Chamber Introduction The Salt Spray Test Chamber applies to the salt spray corrosion test to protect layers of the components, parts, electronic and...
ESD generator is made to test electrical and electronic equipment’s ability to tolerate ESD. Static charge generated by the human body to an object or between...
Meta Description Surge generators are important equipment for performing surge tests. We have written a detailed article on surge generators to ease your confusion. Combination wave/surge...
Needle flame test is used to assess products that are prone to electrical or anyother fire hazards this article will look into different flame retardant test...
Surge generators are useful in running tests on electrical components of products and gadgets. the surge generator working principle helps understand how the device runs tests...
There are a number of corrosion tests that may be used to determine the long-term durability of protective coatings. However, the focus of this article is...
As more and more household appliances enter our daily life, and people use these electrical products more frequently, this requires that in addition to the design...
Salt spray test chambers is that your fasteners are put in, you rely on their endurance and want them to remain serviceable at all times. When...
What is the LED test standard？ Semiconductor light-emitting diode (LED) is a new type of light-emitting body, with high electro-optical efficiency, small size, long life, low...
Metal components, zinc plated nuts and bolts, surface coatings, and paint may be tested for corrosion resistance in salt spray test chambers or salt fog chambers....
Hazards in industry: The generation of static electricity is inevitable in industrial production, and the hazards caused by it can be attributed to the following two...
The reason why LED lighting is easy to spread the flame inside the equipment insulation material or other solid combustible material parts may be ignited by...
The International Electrotechnical Commission (IEC) created the IEC 60068 standard, which is widely accepted throughout the world. Environmental testing for electronic equipment, components, and electromechanical products...
Salt spray test is a kind of environmental reliability test, mainly used to test the corrosion resistance of metal materials of lamps. In order to verify...
IP (International Protection) protection level is the dust and water protection level of the product shell specified by the International Electrical Association (IEC). The requirements for...
1. Differences in application areas ESD61000-2 Electrostatic discharge generator is fully compliant with IEC/EN 61000-4-2, GB/T 17626.2 standards and belongs to the category of electromagnetic compatibility....
The lightning surge generator adopts semiconductor electronic switch technology, the waveform is smooth, the output is accurate, supports the judgment of the failure of the sample,...
The salt spray test chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other...
The salt spray test is divided into two categories, one is the natural environment exposure test, and the other is the artificial accelerated simulated salt spray...
The static electricity generated by the human body to the object or between two objects may cause the electrical and electronic equipment circuits to malfunction or...
The main purpose: The Glow Wire Tester/Glow Wire Test device is used to detect the thermal stress caused by heat sources or ignition sources such as...
The salt spray chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other anti-corrosion...
The ESD test generator is mainly used to simulate the static electricity on the human body. The main function is to generate a certain amount of...
How to do ESD test? Here are a few simple steps: 1. Air discharge/contact discharge a) First turn on the switch power b) Then enter the...
Application: The horizontal and vertical needle flame tester UL94 is mainly used to determine the combustion performance of plastic, rubber or film under a specified fire...
Introduction of glow-wire tester: The glow-wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such as hot...
Application: The salt spray test machine is suitable for the surface treatment of various materials, including paint, electroplating, organic and inorganic film, anode treatment, anti-rust oil,...
Combination waves generator or surges Generators are typically benchtop pieces of equipment that weigh a lot. Ground planes with links to the earth are needed for...
Introduction to Glow Wire Tester: The glow wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such...
ESD tables are excellent if you restrict and regulate the quantity of electricity in a certain region. ESD means electrostatic discharge and is the consequence of...
Test method of salt spray test chamber • First power on the salt spray test chamber (plug in) • Press the red power switch, the salt...
The ESD simulator gun is mainly used to simulate the static electricity on the human body. The main function is to generate a certain amount of...
Lighting surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused...
Having a surge generator ensures you have enough electricity in case of emergencies or power disruptions. The issue develops when your generator stops working properly. Thankfully,...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
1. Introduction: The salt spray corrosion test equipment meets and applies to the standard GB/T2423.17-2008 for salt spray test of electrical and electronic products promulgated by...
The Salt Spray Test Chamber is an environmental test equipment that evaluates the corrosion resistance of products or metal materials by artificially simulating salt spray environmental...
To verify whether the metal parts on the product will corrode when exposed to the atmosphere or other environments, the product can be placed in the...
The Salt Spray Test Chamber can be used to evaluate the salt spray corrosion resistance of materials and their protective coatings, compare the process quality of...
Many industries will need to do withstand voltage tests now, such as lamps, home appliances, electrical equipment, etc. Many customers don’t know exactly what kind of...
The full name of IEC60112-2009 is <Method for the determination of the proof and the comparative tracking indices of solid insulating materials>. It has been prepared...
The full name of IEC 60068-2-11-3.1 is <Basic environment testing procedures Part 2: Tests Test Ka: Salt mist>. It is edited by the IEC technical committee...
The full name of IEC 60695-2-10-1 is Glow/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire...
The full name of IEC 60695-2-2 is Fire hazard testing Part 2: Test methods – Section 2 Needle-flame test. It was prepared by IEC technical committee...
The full name of IEC 61000-4-5-2014 is ELECTROMAGNETIC COMPATIBILITY (EMC) –Part 4-5: Testing and measurement techniques Surge immunity test. This part of International Standard has been...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
ISO is the worldwide union of national standards. The international standard ISO 9227 has been developed by the ISO/TC 156 Metals and Alloys Corrosion Technical Committee....
Introduction: The TTC-1 Tracking Test Chamber which used for determining the degree of protection against formation of conducting paths in solid insulating materials, due to the...
Glow Wire Test introduction: The glow wire testing uses simulation technology to assess the fire hazard of thermal stress caused by heat sources such as hot...
The test requirements for the IP level test of road vehicles lamps mainly refers to ISO20653, DIN 40050-9, and ISO12103, which defines the IP level, test...
The environmental conditions test standard for automotive exterior lighting and optical signal devices is ISO16750 <Road vehicles-Environmental conditions and testing for electrical and electronic equipment>, IEC60068-2,...
As more and more household appliances enter our daily lives, and peoples frequently use these electrical products, it required household appliances not only need meet users...
Introduction of waterproof test system: The waterproof test system includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page...
ZY-3 Needle flame tester is mainly used for testing lighting equipment, low-voltage electrical appliances, household appliances, power tools, electronic instruments, electronic instruments, etc. At the same...
Electrical and radio-frequency disturbances occur during normal operation of many items of motor vehicle equipment. They are generated over a wide frequency range and can be...
The glow wire test is to test the stability of electronic and electrical products at work. The glow wire itself is actually a fixed-size resistance wire...
The full name of IEC 60068-2-75 is Environmental testing-Part 2-75: Tests- Test Eh: Hammer tests. It has been prepared by IEC technical committee 104:Environmental conditions, classification...
Fair: LED Expo New Delhi Date: 2019/11/14-2019/11/16 City: New Delhi Exhibition Hall: India Expo Centre, Great Noida, India Organizers: messe frankfurt Booth of LISUN: L45 Here...
Fair: HKTDC Hong Kong International Lighting Fair 2019 (Autumn Edition) Date: 2019/10/27-2019/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong...
Fair: LED Expo New Delhi Date: 2019/11/14-2019/11/16 City: New Delhi Exhibition Hall: India Expo Centre, Great Noida, India Organizers: messe frankfurt Booth of LISUN: L45 LISUN...
Fair: HKTDC Hong Kong International Lighting Fair 2019 (Autumn Edition) Date: 2019/10/27-2019/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong...
When doing IEC 61000-4-4 EFT immunity test, there are L1, L2, L3, N and PE interface. PE and earth are two different concepts. Electrical fast pulse...
Electromagnetic Compatibility EMC refers to the ability of a device or system to function properly in its electromagnetic environment and does not constitute an electromagnetic disturbance...
Waterproof testing grade reflects the ability of moisture-proof of products. Especially for outdoor activities, it is unavoidable to be in the harsh environment of high humidity....
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
LISUN has participated in this India lighting exhibition for four years and has developed a large market in India. We will continue to participate in the...
This page is a brief introduction and description for conducted immunity testing which based on IEC 61000-4-4 fast transient burst test, IEC 61000-4-5 lightning surge test, IEC 61000-4-11 voltage...
In China, cars are becoming more and more popular. With the development of automobile industry, automotive lights are also developing. Automobile lights have experienced Incandescent Light,...
The International Electrotechnical Commission (IEC) has published IEC 61000-4-5:2014, “Electromagnetic Compatibility (EMC) – Part 4-5: Testing and Measurement Techniques – Surge Immunity Test.” “IEC 61000-4-5:2014 relates to the...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
LED Expo Delhi is a 3 day event being held from 30 November to the 2 December 2017 at the Pragati Maidan in New Delhi, India....
Interlight Moscow is held from November 7 to 10, 2017, Interlight Moscow is not only the biggest show in Russia and Eastern Europe covering the whole...
Thailand International Lighting Fair is the most influential international professional lighting fair in Thailand. Fair Dates: 16-18 November 2017 Fair Venue: Bangkok International Trade & Exhibition...
Interlight Moscow powered by Light + Building is the only trade fair in Russia and the CIS covering the whole range of products relating to above stated...
The Hong Kong International Lighting Fair has become the largest industry exhibition in Asia, and the second largest in the world. LISUN participates this exhibition every...
The Istanbul Lighting Exhibition is the only professional LED application exhibition in Turkey, where all the players in the lighting industry come together under a same...
HKTDC Hong Kong International Lighting Fair (Autumn Edition) 2017, organized by the Hong Kong Trade Development Council at the Hong Kong Convention and Exhibition Centre (HKCEC)...
Istanbul Light is an international platform, where all the players in the lighting industry come together under a same roof and where the latest technologies and...
In September and October 2013, Chairman Xi put forward a major initiative of building “The Silk Road Economic Belt” and “The 21st Century Maritime Silk Road” (referred to...
The International Electrotechnical Commission (IEC) has issued IEC 61000-4-2 Ed. 2.0 (2008-12) entitled “Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge...
With the widespread use of electrical and electronic equipment, the problem of electromagnetic disturbance has also brought electromagnetic pollution. EMC(Electro Magnetic Compatibility) refers to the ability...
Electrostatic discharge may occur from personnel to object or object to object, and it will cause the failure of electric and electronic devices. So, the test...
LEDs and LED luminaires with high light efficiency, longer lifetime, better energy saving and environmental friendly advantages to achieve top position on the lighting industry, like...
In recent years, many manufacturers are planning to manufacture common global LED drive products with a wide voltage input. But since different countries have different product...
EFT is short for Electrical Fast Transient, which refers that the burst has specific duration (defined as 15 ms) and specific pulse period, and the single...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
IEC 62262 (How to install the EUT when doing the IK degree protection test, ventilation requirements, quantity of hammer, distribution of the hammer and hammer each...
IEC 61000-4-5 is part of the IEC 61000 series, which describes surge immunity testing caused by over-voltages from switching and lightning transients. The second edition of...
LVD’s goal is to ensure the safety usage of low-voltage equipment. Its range of application is on electrical products with voltage at 50V to 1000V AC...
Nowadays, with the development of LED industry, its technology continues to be mature and has widely applied at home and abroad. Comparing to mature markets in...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
India lighting market develops rapidly, research reports point that LED lighting market scale will reach 1.14 billion dollars, growth 47.1%. India government intends to make India...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
It is quite important for factories and users to prevent equipment from electrostatic discharge. With the wide application of microelectronic components, to improve the reliability of...
Combination wave generator is a high reliability analog lightning surge wave generator designed for lightning production enterprises. It is suitable for Electromagnetic compatibility (EMC) – Surge...
At the end of October 2016, Lisun attended lighting fair in as in previous years. Hongkong International Lighting Fair has been an ideal platform for LED...
In October 5th-7th 2016, New Delhi LED lighting exhibition held in New Delhi, the capital of India. As one of India’s largest LED lighting exhibition, New...
CE is a safety certified standard, and it is regarded as the passport to enter into European Market. From the date of Jan.2, 2013, all the...
Now, the led COB package, in fact, we can know that most of the COB package, including Japan COB packaging technology, they are based on the...
Under the effect of high temperatures, the structural characteristics of non-metallic materials, insulation materials will change greatly, which manifests itself softened or melted. Ball pressure test...
Lisun will come with professional technical team to attend 2016 Germany Frankfurt Lighting Fair( Light + Building) dated on 13th Mach ~18th March, 2016. This time...
Glow wire test is to test the stability of electrical and electronic products during working. And the hot wire itself is the resistance wire ring with...
IEC 60529 (GB4208-2008) IP code is a coding system to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of...
The 2015 New Delhi Autumn LED Expo was successfully held during 3th December~5th December. As one of India biggest exhibition, this exhibition main relate different lighting...
It is the second time we have attended the fair, and it is a successful and wonderful fair. Lisun’s booth attracks numerous people’s visit.
During the exhibition, Lisun showed its main instruments which attracted many customers to stop and talk. Among them, there are not only many old customers hope...
As in previous year, Lisun and its instruments appeared at booth ED-A01 of Hong Kong International Lighting Fair (Autumn Edition) during 27th October to 30th October....
The best way to test electric and electronic products’ fire hazard, is truly to reproduce the actual existence of conditions, but it is impossible in the...
OLED (Organic Light Emitting Display) is a new generation of flat panel display technology after LCD, LED, CRT and PDP (Plasma Display Panel). It has significant new...
Surge generator anti-interference measurement is based on the international standard IEC 61000-4-5. 1 Test objective The entire lightning stroke in the nature (namely the indirect thunder such...
Lisun attended Hongkong Lighting Fair dated 27th October to October 30th 2012, during the exhibition, Lisun showed many high excellence testing equipments to visitors, like Goniophotometer,...
Fair: Hong Kong International Lighting Fair 2012 (Autumn Edition) Date: 2012/10/27-2012/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong Trade Development...
In order to expand its business, Lisun decides to move Lisun Electronics Shanghai to a new office. Lisun built a high level products show room &...
Lisun updated the Spectrophotometer of LMS-5000 software. The new version software updated serval function to make the customer have a much experience. LMS-5000 is a high accuracy...
Our manufactory will attend the Guangzhou International Lighting Exhibition on June 9th~12th, 2011 About LISUN: it is lead in CFL and LED test instruments, main products are EMC Test System,...
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
Our manufactory will attend the Guangzhou International Lighting Exhibition on June 9th~12th, 2009. By then we will show our new products such as RoHS Test Equipment (Energy Dispersive...
Lisun Hong Kong, Shanghai and China Factory office will be off to enjoy the Chinese New Year Holiday from 24th, Jan to 1st, Feb. If you...
During October 12nd to 15th, Lisun will exhibit in the 2008 Hong Kong Global Sources Fair in booth# 11M30 (Hall 9&11) near the Hong Kong International...
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
