LISUN’s electric toys test solutions are engineered to meet the stringent requirements of key international safety standards, providing comprehensive support for evaluating the safety and performance of electric toys. These standards include IEC 62115:2017, which outlines critical safety criteria for electric toys covering electrical, mechanical, and thermal aspects to prevent hazards like electric shock and fire; IS 15644:2006 and UL 696:2020, which set region-specific safety guidelines for electric toys in India and the United States respectively; ISO 8124-1:2022 and EN 71-1:2014, which focus on mechanical and physical safety to avoid risks from sharp edges, small parts, and instability; and ASTM F963:2023, a comprehensive U.S. standard encompassing mechanical, flammability, chemical, and labeling requirements. Together, these standards form a global framework to ensure electric toys are safe for children.
LISUN’s electric toys test solutions cover all essential test items specified in the aforementioned standards, supported by a full suite of professional testing equipment. This enables a wide range of evaluations, including electrical safety tests (such as electric strength under humid conditions, insulation resistance, and leakage current), mechanical and physical performance assessments (including impact, drop, torque, tension, and stability tests), flammability and heat resistance checks (like glow-wire, needle-flame, and ball pressure tests), chemical content analysis, and electromagnetic compatibility (EMC) tests (such as electrostatic discharge, radiated fields, and transient burst immunity). By offering end-to-end testing support, we assist manufacturers and laboratories in ensuring their electric toys comply with global safety standards, safeguarding children’s well-being during play.
Electr Toy Test Solution
Standard:
Part 1 | IEC 62115:2017 | Electric toys-Safety |
Part 2 | IS 15644:2006 | Safety Of Electric Toys |
Part 3 | UL 696:2020 | Electric toys-Safety |
Part 4 | ISO 8124-1:2022 | Safety of toys-Part 1: Safety aspects related to mechanical and physical properties |
Part 5 | ASTM F963:2023 | Standard Consumer Safety Specification for Toy Safety |
Part 6 | EN 71-1:2014 | Safety of toys – Part 1: Mechanical and physical properties |
Part 1 IEC 62115:2017 Electric toys-Safety
LISUN supplies the fully test solutions for the following IEC 62115:2017, please see the below excel table:
IEC 62115:2017 Clause and Subject | LISUN MODEL |
10.2 Electric strength under humid conditions | GDJS-015B |
11 Electric toys used in water, electric toys used with liquid and electric toys cleaned with liquid | JL-X |
12.1 test Ehb of IEC 60068-2-75. the spring hammer test. | IK01-07 |
13.4.1 test probe 11 of IEC 61032 | SMT-1150 |
13.4.1 test fingernail of Figure 7 of IEC 60335-1:2010 | SMT-335F7 |
13.4.2 Drop Test | LS-B33 |
17 Clearances and creepage distances | CK-1 |
18.1 Resistance to heat–ball pressure test | ZBP-T |
GW-500 | |
18.2 Resistance to fire–glow-wire test | ZRS-3H |
19 Radiation and similar hazards | LS-IEC62115C19 |
Annex E Safety of electric toys incorporating optical radiation sources | |
Annex B Needle-flame test | ZY-3 |
Annex D Electric toys with protective electronic circuits | |
D.2.2 Electrostatic discharge | ESD61000-2 |
D.2.3 Radiated fields | GTEM-2 |
D.2.4 Transient bursts | EFT61000-4 |
D.2.5 Voltage surges | SG61000-5 |
D.2.6 Injected current | RFCI61000-6 |
D.2.7 Voltage dips and interruptions | CSS61000-11 |
Part 2 IS 15644:2006 Safety Of Electric Toys
LISUN supplies the fully test solutions for the following IS 15644:2006, please see the below excel table:
IS 15644:2006 Clause and Subject | LISUN MODEL |
11 Moisture resistance | GDJS-015B |
13 Mechanical strength | IK01-07 |
18 Clearances and creepage distances | CK-1 |
19.1 Ball presure test | ZBP-T |
GW-500 | |
19.2 glow wire test | ZRS-3H |
20 Radiation, toxicity and similar hazards | LS-IEC62115C19 |
Annex B Needle-flame test | ZY-3 |
Annex B 15 Insulation resistance and dielectric strength | WB2681A |
Part 3 UL 696:2020 Electric toys-Safety
LISUN supplies the fully test solutions for the following UL 696:2020, please see the below excel table:
UL 696:2020 Clause and Subject | LISUN MODEL |
10 Coatings and Platings | EDX-2A |
Figure 19.1 | SMT-PA100A-UZ11 |
Figure 19.2 | SMT-PA130A |
Figure 19.3 | SMT-PA140A |
Figure 19.4 | SMT-02T10 |
26 Leakage Current Test | WB2675D |
27 Humidity Conditioning Test | GDJS-015B |
30 Temperature Test | |
28.2 Drop test | DT-60KG |
31/36 Dielectric Voltage-Withstand Test | WB2671B |
34 Stability Test | LVD-100KG |
LISUN supplies the fully test solutions for the following ISO 8124-1:2022, please see the below excel table:
ISO 8124-1:2022 Clause and Subject | LISUN MODEL |
5.12 Stability and overload tests | WDT-2 |
5.14 Impact test for toys that cover the face | LS-B33 |
5.18 Determination of temperature increases | WS-1 |
5.24.2 Drop test | DT-60KG |
Part 5 ASTM F963:2023 Standard Consumer Safety Specification for Toy Safety
LISUN supplies the fully test solutions for the following ASTM F963:2023, please see the below excel table:
ASTM F963:2023 Clause and Subject | LISUN MODEL |
4.2 Flammability | ZY-3 |
4.3.5 Heavy Elements | EDX-2A |
4.15 Stability and Over-load Requirements | WDT-2 |
8.15 Test for Stability of Ride-on Toys or Toy Seats | |
4.25.9.4 flame rating of UL-94 V-0 | HVR-LS |
8.7.1 Drop Test | DT-60KG |
8.10 Compression Test | LS-B08 |
Part 6 Safety of toys – Part 1: Mechanical and physical properties
LISUN supplies the fully test solutions for the following EN 71-1:2014, please see the below excel table:
EN 71-1:2014 Clause and Subject | LISUN MODEL |
8.3 Torque test | CH338 |
8.4 Tension test | PULL-2000KG |
8.5 Drop test | DT-60KG |
8.6 Tip over test | LS-DDT1-B |
8.7 Impact test | LS-B33 |
8.8 Compression test | LS-B08 |
Your email address will not be published. Required fields are marked *