IEC 62115:2017 Electric toys-Safety

IEC 62115:2017 Electric toys—Safety is an international standard established by the International Electrotechnical Commission (IEC), specifying safety requirements for electric toys designed or intended for use by children under 14 years old. It covers all types of electric toys that rely on electrical energy for at least one function, including battery-powered, mains-connected, and rechargeable toys such as remote-controlled vehicles, electronic building sets, and interactive plush toys.

The standard addresses multiple safety dimensions to protect children from hazards. In electrical safety, it sets voltage limits for AC/DC toys, mandates insulation protection for live parts, and requires withstand voltage tests to prevent electric shocks. For battery and charging safety, it prohibits dangerous battery types and enforces overcharge/discharge protection for rechargeable toys. Mechanical safety provisions include safeguards for heat-generating components and moving parts, as well as structural requirements for wires and connectors. While chemical safety aspects like heavy metal limits in batteries/electronics and phthalate restrictions in plastics are not explicitly detailed in this standard, it references other relevant toy safety standards (e.g., ISO 8124 series) for comprehensive hazard mitigation, ensuring toys are safe under normal use and reasonably foreseeable misuse.

LISUN supplies the fully test solutions for the following IEC 62115:2017, please see the below excel table:

IEC 62115:2017 Clause and Subject	LISUN MODEL
10.2 Electric strength under humid conditions	GDJS-015B
11 Electric toys used in water, electric toys used with liquid and electric toys cleaned with liquid	JL-X
12.1 test Ehb of IEC 60068-2-75. the spring hammer test.	IK01-07
13.4.1 test probe 11 of IEC 61032	SMT-1150
13.4.1 test fingernail of Figure 7 of IEC 60335-1:2010	SMT-335F7
13.4.2 Drop Test	LS-B33
17 Clearances and creepage distances	CK-1
18.1 Resistance to heat–ball pressure test	ZBP-T
	GW-500
18.2 Resistance to fire–glow-wire test	ZRS-3H
19 Radiation and similar hazards	LS-IEC62115C19
Annex E Safety of electric toys incorporating optical radiation sources
Annex B Needle-flame test	ZY-3
Annex D Electric toys with protective electronic circuits
D.2.2 Electrostatic discharge	ESD61000-2
D.2.3 Radiated fields	GTEM-2
D.2.4 Transient bursts	EFT61000-4
D.2.5 Voltage surges	SG61000-5
D.2.6 Injected current	RFCI61000-6
D.2.7 Voltage dips and interruptions	CSS61000-11

Tags：CK-1 , CSS61000-11 , EFT61000-4 , ESD61000-2 , GDJS-015B , GTEM-2 , IK01-07 , JL-X , LS-B33 , LS-IEC62115C19 , RFCI61000-6 , SG61000-5 , SMT-1150 , SMT-335F7 , ZBP-T , ZRS-3H , ZY-3