LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
The IEC 61386-1:2017 standard provides general requirements for conduit systems used in cable management. It outlines the technical specifications and performance criteria for conduit systems, including their materials, design, and durability to ensure proper protection of electrical cables in various environments. The standard covers the essential properties of conduit systems such as mechanical strength, resistance to chemical exposure, fire resistance, and the ability to withstand temperature variations. It also emphasizes the need for standardized testing procedures to assess the compliance of conduit systems with these performance characteristics, ensuring safety and reliability during their installation and use.
Additionally, IEC 61386-1:2017 specifies installation requirements and quality control measures to guarantee that conduit systems are properly installed and maintained. This includes guidelines on the correct laying of conduits, managing bends, joints, and connections, as well as ensuring adequate protection against external mechanical damage. The standard also highlights the importance of ensuring that conduit systems provide the necessary space for cables to be easily installed, replaced, or maintained. By adhering to these guidelines, the standard aims to improve the overall safety, performance, and longevity of cable management systems in a wide range of applications.
LISUN supplies the fully test solutions for the following IEC 61386-1:2017, please see the below excel table:
| IEC 61386-1:2017 Clause and Subject | LISUN Model |
| 10.3 Impact Test (Figure 2) | DWC-1 |
| 10.4 Bending test | SW-6 |
| 10.5 Flexing test | WDT-B42 |
| 11.3 Insulation resistance | WB2681A |
| 13.1.3 Spread of fire | ZRS-3H |
| 14.1.2 Degree of protection-Ingress of foreign solid objects | SC-015 |
| 14.1.3 Degree of protection-Ingress of water | JL-34 |
| 14.2 Resistance against corrosion | YWX/Q-010 |
There are some standards focus on specifying technical requirements and test methods for different categories of lampholders in the lighting field, ensuring their safety, compatibility, and...
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN’s cable and wire test solutions meet IEC 60245-1, IEC 60227-1, IEC 60502-1 and IEC 60189 standards, covering electrical, mechanical, and safety tests for global compliance.
LISUN has all equipment according to the IEC60669 measurement, including environmental chamber, IP code waterproof dustproof test, switch lift test, etc.
LISUN’s plugs and sockets test solutions meet IEC 60884-1, IEC 60670-1, IEC 62613-1 standards, covering electrical, mechanical and safety tests for global compliance.
LISUN provide full test solutions for HID lamp, including integrating sphere system, goniophotometer system, EMI EMC chamber, HID ballast tester, electrical safety test, etc.
Lisun can supply full test solutions for fluorescent lamp, including integrating sphere system, goniophotometer system, EMI EMC test, electronic ballast tester, electrical safety test, etc.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s mobile and network test solutions include EMC/EMI testing, color glossiness measurement, IP waterproof/dustproof tests, IK impact tests, and environmental simulation, meeting international standards.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract Salt spray corrosion is a major environmental factor affecting the service life and reliability of metal, coating, electrical and electronic products. As the core equipment...
Abstract: The waterproof performance of electrical and electronic product enclosures directly determines the safety, reliability and service life of equipment under humid, rainy, immersion and other...
Abstract In the R&D, production and quality control of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts, dust testing equipment...
Abstract Salt testing equipment has emerged as an essential instrument for evaluating the corrosion resistance of metallic materials and protective coatings across diverse industrial applications. This...
Abstract Water spray test chambers designed for IPX5 and IPX6 waterproof testing represent critical equipment for verifying the ingress protection capabilities of electrical and electronic product...
Abstract: Sand and dust testing is a core method to verify the dustproof performance of enclosures for various industrial products, which directly determines the reliability and...
Abstract: Glow wire flammability index (GWFI) is a core indicator for evaluating the flame retardant performance of products and plastic components in electrical and electronic engineering,...
Abstract As the core testing equipment for simulating artificial salt spray corrosion environments, salt spray cabinet is a key tool for evaluating the corrosion resistance of...
Abstract: This paper takes the JL‑56 IPX5 and IPX6 Waterproof Testing Machine in the LISUN JL‑X waterproof test system as the research object. Based on the...
Abstract IPX3/4 testing for lighting fixtures represents a critical validation methodology for luminaires deployed in challenging environmental conditions. This systematic analysis examines the oscillating tube apparatus...
Abstract Glow wire apparatus testing has become a critical method for evaluating flame retardancy and fire safety of electrical and electronic products. This paper presents a...
Abstract Dust test chambers play a critical role in verifying the environmental reliability of electrical and electronic products by simulating real-world dust ingress conditions. This comprehensive...
Abstract: The salt spray corrosion test chamber is a core environmental simulation device for corrosion resistance testing of materials and products, playing an irreplaceable role in...
Abstract: Flame retardancy performance is a core safety indicator for electrical and electronic products, household appliances, lighting equipment and their plastic components. As a high-precision testing...
Abstract: Dust testing equipment is a core device for the detection of industrial products’ dustproof performance. It can simulate natural dust climatic conditions to conduct standardized...
Abstract: The sand and dust test chamber is a key device for simulating dust environments and conducting product dustproof performance testing. Relying on the coordination of...
Abstract IEC 60529 IPX3/IPX4 Testing establishes the definitive methodology for evaluating enclosure protection against sprayed water in luminaire applications. This comprehensive analysis examines five critical engineering...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
Abstract: The systematic evaluation of the waterproof performance of electronic and electrical products is a critical step in ensuring product reliability and market compliance. As the...
Abstract: The water spray test is a core method for verifying the waterproof and protective capabilities of electronic and electrical products. By simulating water ingress conditions...
Abstract: Salt spray test corrosion is a core method for evaluating the corrosion resistance of materials and products. As a key device for simulating salt spray...
Abstract With the rapid development of electrical and electronic products, household appliances, lighting equipment and other industries, the flame retardancy of products and plastic components has...
Abstract With the continuous improvement of waterproof performance requirements for products in industries such as electronic and electrical appliances, auto parts, ipx8 waterproof testing (the highest...
Abstract: In electronic engineering and environmental reliability evaluation systems, the Ingress Protection (IP) rating is an internationally recognized standard for measuring products’ defense capabilities against solid...
Abstract:With the acceleration of global industrialization, the ability of electronic, automotive, and lighting equipment to withstand extreme climatic conditions has become a core measure of product...
Abstract Salt spray corrosion is one of the main environmental factors leading to the failure of metal materials and various industrial products. The global economic loss...
Abstract This paper systematically elucidates the technical principles and standardized methodologies for the IPX3 and IPX4 water ingress testing, which are critical assessments within the ingress...
A glow wire test apparatus is a vital tool that can be used to measure the fire hazard in electrical and electronic devices. It replicates the...
Abstract In the design and manufacturing of modern electrical and electronic products, the enclosure protection rating is a core indicator for assessing their reliability, safety, and...
Abstract Salt spray corrosion is one of the core factors leading to metal material failure and reduced product reliability in marine environments and industrial scenarios. Accurately...
Outdoor and automotive designed products are constantly exposed to airborne particles that will undermine performance, safety and longevity. Enclosures may allow fine dust, sand and road...
The glow wire test standard is the most broadly applied test to determine the ignition resistance of insulating materials, plastics and enclosure parts subjected to overheating...
Products that are to be used outdoors, in industrial, military or desert conditions must show good performance under the exposure of airborne particles. These deplorable conditions...
Exposure to water has become one of the leading factors of failure of the electronic and mechanized commodities which are either being used in the outdoor...
Safety inspection of electrical and electronic products in regard to fire safety is a prerequisite in the world-wide industries. As devices get smaller and denser and...
Devices that are electronic, industrial, car, battery-powered, and field-mounted often work in dusty environments. Small yet at first sight harmless, dust particles will eventually destroy insulation,...
Waterproofing is a critical design consideration to current electronic and mechanical designers that consider using their products in wet or outdoor environments. Consumer electronics, industrial controllers,...
With the globalization of industries towards electrification, smart power distribution, automobile automation and electronics in consumer devices being smaller than ever, the demand has been put...
Environmental sealing is increasingly important in the manufacture of electrical, mechanical, automotive, and outdoor industrial products in order to be functional and safe. Since dust is...
The ingress protection testing has been significantly changed in the past 10 years with the push of industries among outdoor-rated electronics, sealed industrial controls, marine-rated automation,...
Fire safety has been one of the factors that are very relevant in designing electrical and electronic products. The size of circuits is decreasing and heating...
Modern products have to resist environment conditions up to soft rains and jets of high pressure as well as short-term immersion. It does not matter whether...
Ingress protection test is one of the significant quality assurance measures of present day electrical and mechanical products. An IP test machine enables the engineers to...
1. Introduction 1.1 Research Background and Significance In industrial production and practical applications, metal materials and various products are often exposed to the erosion of chlorine-containing...
Abstract This paper focuses on the LISUN ZRS-3H Glow-Wire Tester, a high-precision testing device developed by LISUN specifically for evaluating the flame-retardant properties of electrical and...
Abstract In the field of industrial product reliability testing, salt spray corrosion testing is a key method for evaluating the corrosion resistance of materials and coatings,...
Abstract In industries such as electrical and electronic products, automobiles, and motorcycles, products are often exposed to the erosion of dust environments. Dust intrusion may lead...
Abstract The waterproof performance of enclosure protection levels is a core indicator for measuring the reliability of electronic and electrical products, especially crucial for outdoor LED...
Abstract Dust intrusion is a major threat to the reliability and service life of products in industries such as electronics, electrical engineering, and automotive manufacturing. The...
Abstract The flammability test for plastics is a fundamental assessment in material science and product safety, particularly for components used in electrical and electronic appliances. Among...
Abstract Ingress Protection (IP) testing, as defined by international standards such as IEC 60529, is critical for ensuring the reliability and safety of electrical and electronic...
Abstract In environments where electronic and electrical products, automotive components, and lamps operate, dust accumulation and infiltration often lead to performance degradation, functional failures, or shortened...
Abstract Salt spray corrosion, as one of the most destructive forms of atmospheric corrosion, poses a severe threat to the durability and reliability of metal materials...
Abstract Glow wire flammability testing is a critical evaluation method for assessing the fire safety of polymeric materials used in lighting devices, electronic products, and household...
In the ever – evolving landscape of industrial and consumer product manufacturing, the protection of internal components from environmental factors, especially water ingress, is of utmost...
Introduction In the operation and maintenance of modern electrical equipment, insulation resistance testing is a critical process for ensuring safety, reliability, and performance. This testing method...
Introduction A salt fog chamber, commonly referred to as a salt spray test chamber, is a sophisticated piece of equipment designed to replicate the harsh, corrosive...
Introduction A waterproof test chamber is a sophisticated piece of equipment designed to simulate wet environments, such as drizzle, heavy rain, spray, or full immersion, to...
Introduction In the contemporary world of electrical and electronic product design, IP (Ingress Protection) ratings serve as a crucial metric for assessing the capability of device...
Introduction In the design of modern electronic products, Ingress Protection (IP) ratings are crucial standards for assessing a device’s ability to withstand environmental factors such as...
Introduction Corrosion testing plays a crucial role in quality assurance laboratories within the metal industry, especially when it comes to quality control testing. The LISUN YWX/Q-010...
Introduction In today’s rapidly evolving industrial landscape, ensuring the safety and reliability of materials under extreme conditions is more critical than ever. Among various testing methods,...
Abstract In industries where products are exposed to dusty environments, assessing their resilience to dust ingress is crucial. The LISUN SC-015 Dustproof Test Chamber offers a...
Abstract The insulation resistance tester plays a crucial role in ensuring the safety and efficiency of electrical equipment. The LISUN WB2681A, as an advanced insulation resistance...
In the modern world, ensuring the fire safety of electrical products and materials is of paramount importance. The quality and safety of electrical and electronic devices,...
Corrosion is one of the most significant challenges faced by materials exposed to harsh environments. Whether in industrial equipment, automotive parts, or consumer electronics, corrosion can...
Abstract In the modern world, the safety of electrical and electronic products, as well as household appliances, has become a critical concern due to the potential...
Introduction Corrosion is a major issue affecting materials, particularly metals, across various industries. In order to understand the corrosion resistance of materials, accelerated testing methods such...
Abstract Waterproof testing is a crucial part of ensuring the durability and functionality of products exposed to water or harsh environmental conditions. A reliable waterproof testing...
Abstract Flame retardancy testing is crucial for ensuring the safety of electrical and electronic products. The Glow Wire Test Procedure is a widely recognized method used...
Abstract: The IPX4 waterproof test plays a critical role in determining the water resistance of electronic devices, electrical components, and other products used in various industries....
Introduction Corrosion is one of the primary concerns in the durability and longevity of industrial and consumer products. To mitigate the effects of corrosion, rigorous testing...
Abstract This article explores the applications and principles of waterproof rain test chambers, focusing on their use in evaluating enclosure protection grades under various standards such...
Abstract: This paper focuses on the corrosion resistance testing method of metal deposits and chemical treatment layers of light industrial products based on the ASTM B117...
Abstract This paper explores the application of the LISUN SC-015 Dustproof Testing Machine in assessing the physical and performance characteristics of electronic and electrical products, luminaires,...
Abstract: This paper comprehensively investigates the detrimental effects of salt spray corrosion on various products and highlights the advantages of the LISUN YWX/Q-010 Salt Spray Test...
Introduction Corrosion is a critical challenge for many industries, particularly those working with metals and alloys. The salt spray test is one of the most widely...
Abstract Water quality testing equipment is often exposed to challenging environments, including water, dust, and humidity. Ensuring the equipment’s durability and reliability requires stringent waterproof testing...
Abstract Dust testers play a pivotal role in evaluating the resistance and durability of products exposed to dusty environments. These tests ensure that electronic components, lighting...
Introduction In the world of material testing, one of the most critical assessments for understanding the durability of products in harsh environments is salt spray corrosion...
Flammability testing is a critical step in assessing the safety of materials used in electrical and electronic products. The glow wire test machine, such as the...
Corrosion is a persistent issue affecting the durability and performance of components, parts, electronic devices, metal materials, and industrial products. Salt Spray Test Chambers, such as...
Abstract The waterproof chamber is an essential tool for evaluating the ingress protection (IP) ratings of electronic and electrical products against water intrusion. This paper discusses...
Abstract Insulation resistance testing plays a crucial role in determining the safety and operational efficiency of electrical equipment. An essential tool for this process is the...
Abstract This paper focuses on the ZRS Glow Wire Tester, specifically the LISUN ZRS-3H Glow-wire Test Apparatus, analyzing its application in flame retardant testing within quality...
Abstract The salt spray corrosion test, an accelerated corrosion testing method, is extensively used to assess the corrosion resistance of various materials and coatings. This study...
Introduction The salt spray machine plays a critical role in the evaluation of material resistance to corrosion, particularly in industrial applications. One of the industry-standard tools...
Introduction The IP65 test is a critical procedure for determining the effectiveness of enclosures in protecting internal components from environmental factors such as dust and water....
Introduction The dustproof rating test is an essential aspect of evaluating electronic devices, enclosures, and other industrial equipment that are exposed to harsh environments. Understanding how...
In various industries, understanding the durability and resistance of materials to corrosive environments is essential. One common method to evaluate this is the salt contamination test,...
Introduction ASTM B117 salt spray testing is one of the most widely used methods for assessing the corrosion resistance of materials and coatings. It simulates harsh...
Water resistance testing is a critical method for evaluating the durability and performance of materials and products in corrosive environments. The salt spray test, specifically, is...
Salt spray testing is a crucial method for evaluating the corrosion resistance of materials and coatings. This paper explores the fundamental principles of salt spray tests,...
Abstract This article examines the role of dust chambers in testing products under simulated dusty climatic conditions. Dust chambers are essential for assessing the physical and...
Abstract Waterproof testing is crucial in ensuring the safety and functionality of electrical and electronic products in wet and humid conditions. This paper explores the principles,...
Abstract The salt mist test, a critical assessment method for evaluating the corrosion resistance of materials, plays a vital role in ensuring the durability and reliability...
Abstract Ingress Protection (IP) testing is crucial in determining the durability and reliability of electronic devices and components exposed to environmental factors. The LISUN JL-X IP...
Electrical safety is paramount in the design and manufacturing of modern electronic devices. To prevent fire hazards and ensure product reliability, manufacturers must conduct rigorous testing...
In today’s highly competitive electronics market, product durability and reliability are critical factors that can determine a product’s success. As consumer demand for waterproof and weather-resistant...
In our daily lives, electronic and electrical products generally come with certain levels of dust and water resistance. These protective capabilities are crucial for safeguarding products...
Waterproof test chambers are critical tools for evaluating the water resistance of household, commercial, and industrial electrical and electronic equipment. These chambers adhere to international standards...
Overview The salt spray test chamber is primarily used for conducting corrosion tests to ensure the quality of ferrous metals and their coatings. This test is...
The Impact of Salt Spray on Electronic Products and Mitigation Measures Salt spray is widely present in marine, atmospheric, terrestrial, lake, and river environments, inevitably exposing...
Salt Spray Test Chamber: Testing Standards Salt spray test is an environmental test that evaluates the corrosion resistance of products or metal materials by simulating a...
Overview Glow Wire Testing is a crucial method for evaluating the stability of electronic appliances during operation. By simulating high-temperature conditions resulting from electrical faults, this...
With the continuous development of technology and the improvement of people’s living standards, electronic products and mechanical equipment have become an indispensable part of daily life....
Dust penetration into products can have significant impacts on their performance and durability: • Breaching Seals and Casings:Dust can infiltrate internal spaces through seals and casings,...
Corrosion testing is widely employed in quality assurance laboratories within the metal industry as a critical step in quality control testing. These tests are typically conducted...
What application of Glow wire tester? Glow wire tester is a widely used method for assessing the flammability of plastic sheets or components. This testing procedure...
Waterproof test machine is applicable to a wide range of products, including but not limited to electronic components, outdoor lighting fixtures, automotive accessories, communication equipment, cabinets,...
What is An Insulation Resistance Tester? Insulation resistance tester is an important technical tool to measure the protective capacity of electrical systems. It evaluates the electrical...
With the continuous development of technology, various electronic devices are becoming more and more widely used in our lives. Electronic devices usually need to be tested...
Hot wire testing is a common method used to evaluate the flammability of materials. The Glow-wire Test Apparatus is the main tool used for this type...
The glow-wire tester is used to simulate the ignition of insulation materials or other combustible components inside equipment that may catch fire due to a hot...
Dustproof test chamber is also known as IPX6 dustproof test chamber. With the rapid development of modern technology, electronic products are being widely used in our...
The scientific name of the sand dust test chamber is Dustproof chamber, and Dustproof Testing Machine. It is used for IP dust testing of products. Its...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
What is a Waterproof Jet Test Device? IPX56 Waterproof Jet Test Device, is an open waterproof test equipment that belongs to the IPX56 standard. It is...
Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected by...
The IPX7 Immersion tank Waterproof test Device is mainly used to test the physical and other related properties of electronic products, electrical products, lamps, electrical cabinets,...
The ipx4 Swing Pipe Water Spray Test Equipment is a waterproof performance testing equipment widely used in electronic and electrical engineering, communication, lighting, automobile and other...
In the modern society where waterproofing is ecoming more ubiquitous, more manufacturers are developing consumer products with various waterproof testing equipment. The purpose is to meet...
IPX7 Immersion tank Waterproof test Device, also known as rain test chambers, waterproof testing equipment, waterproof detectors, waterproof testing machines, IP waterproof testing machines, etc., are...
With the continuous development of technology, various electronic devices are becoming more and more widely used in our lives. Electronic devices usually need to be tested...
With the popularity of smart devices and increasing demands for waterproof and dustproof features in devices like smartphones and watches, waterproof and dustproof technologies have received...
The sand and dust test chamber is suitable for the antifouling test of parts and materials such as welders, electronic equipment, electrical products, automobile lights, motorcycles,...
Introduction The Glow Wire Test is a standard procedure for determining the combustibility of electrical insulation. It’s vital to the security and dependability of electrical and...
Introduction Testing materials and coatings with salt spray is a common and accepted way to gauge their resistance to corrosion. Various organizations have set particular criteria...
Dust test box is a kind of equipment used for product dust prevention now. Now some products require strict use environment, so dust test box will...
The sand and dust test chamber is an instrument that can accurately detect the sealing and anti wind sand performance of outdoor equipment, transportation, electronic communication...
I. Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
The Salt Corrosion Test is a method that uses a test device called a “Salt Spray Corrosion Test Chamber” with a certain volume space to assess...
The sand dust test chamber is an instrument that can accurately detect the sealing and anti wind sand performance of outdoor equipment, transportation, electronic communication and...
The IPX8 Immersion tank Waterproof test Device is applied to electronic components, outdoor lighting fixtures, mobile phone casings, automotive accessories, etc. It is a test that...
LED lighting fixtures are being used more and more extensively indoors and outdoors, and their waterproof performance has become an important consideration for users. LED waterproof...
Dust testing equipment is a device used to test the dustproof rating of electronic devices and products. IP6X is a standard set by the International Electrotechnical...
A salt spray test chamber is used to assess the corrosion resistance of the tested samples by subjecting them to salt spray corrosion. Salt spray refers...
Testing Flammability with Glow Wire Test Apparatus and Needle Flame Apparatus is used to determine if a substance can be ignited and pose a risk of...
I. Introduction of Salt Spray Test Corrosion testing is widely adopted and used for quality control testing in the metal business quality assurance laboratories. The mentioned...
The official name of the dust test chamber is IP6X dust test chamber, IP5X dust test chamber, and various other names. It is an instrument used...
The sand and dust test chamber can also be called a dustproof testing machine, dust proof chamber, etc. It is used to test the physical and...
Introduction The automobile sector has a tremendous issue from corrosion, which reduces vehicle longevity, efficiency, and safety. Corrosion testing is an essential part of ensuring the...
The sand and dust test chamber is used to test the protective performance of the test piece by simulating a windy sand environment. To simulate the...
What is Salt Fog and Salt Spray Testing? Salt Fog and Salt Spray Testing is a kind of environmental test, mainly used to evaluate the corrosion...
The appearance of the IPX34 Swing Pipe Water Spray Test Equipment and the test chamber shell are made of blue and white paint. They have evolved...
I. The purpose of the dust test chamber The dustproof test chamber, also known as dustproof grade test equipment, is suitable for the dustproof test of...
The Sand Dust Test Box is designed for assessment of two levels of protection standard specified by the enclosure protection standard, which is mainly used to...
IP Waterproof Testing Device is a high-precision testing tool for testing waterproof performance, airtightness and sealing of products. It has the advantages of precise testing and...
Introduction By replicating real-world fire events and assessing the combustibility of various materials, the Glow Wire Test equipment is an indispensable tool for detecting potential fire...
The IPX12 drip test box has the characteristics of circulating water in its box structure: for testing, it is both energy-saving and environmentally friendly. More importantly,...
Dust test box is a kind of equipment used for product dust prevention now. Now some products require strict use environment, so dust test box will...
Waterproof Rain Test Chamber is an advanced device used to simulate atmospheric environment, so the safe use and correct operation of it is very important. So,...
Introduction The Glow Wire Test device is an essential piece of equipment for conducting fire safety tests on a wide range of materials. The capabilities and...
Introduction Product development and quality assurance in many sectors cannot proceed without extensive environmental testing. Manufacturers may test the performance, durability, and resistance to deterioration of...
I. Dustproof Chamber introduction The Dustproof Chamber is suitable for dust and dust-proof testing of various automotive parts, testing parts including headlights, instruments, electrical dust-proof sleeves,...
The scientific name of dustproof test chamber is sand and dust test chamber, which is widely used, including but not limited to the protection level test...
Introduction A crucial part of fire risk assessment is glow wire testing, which is a useful method for analyzing the fire behavior and safety capabilities of...
Salt spray testing machine is a kind of testing device used to simulate corrosive environment containing salt gas, to evaluate the anti-corrosion performance of different materials,...
I. Definition of Glow Wire Test The Glow Wire Tester is used to test the stability of electronic appliances when working. The hot thread itself is...
Dustproof Test Chamber is a specialized instrument used to assess and measure a device or equipment’s ability to withstand penetration, abrasion, or obstruction by dust particles....
The sand and dust test chamber, also known as the dustproof test chamber, is used to test the IP dust level of the product shell under...
Introduction The evaluation of electronic products’ resistance to water, the assurance of their longevity, and the fulfillment of customer expectations are all facilitated by waterproof testing...
The IPX12 drip box consists of a Waterproof Test Equipment, a Waterproof Test Machine , etc. It uses the form of drip to carry out IPX1/2 waterproof...
Introduction The Glow Wire Test is an essential tool for gauging the safety of electrical and electronic components in the event of a fire. This test...
IPX7 Immersion tank Waterproof test Device indicates that the waterproof grade of the product is 7. When the product is immersed in water for a short...
Introduction When it comes to selling products, dependability is essential. The value of dependable products cannot be overstated in the industrial sector. The performance and lifespan...
The glow wire test apparatus simulates that parts of insulation materials or other solid combustible materials that are prone to flame propagation inside the equipment may...
Glow wire testing can be used to assess fire protection in electrical equipment. It is intended to simulate what an over-heated component may cause a fire...
Introduction In today’s technologically advanced society, electrical gadgets are often exposed to the elements, including water. Manufacturers put items through waterproof testing to guarantee they can...
What is the waterproof standard of the immersion tank waterproof test device: The IP (INGRESS PROTECTION) protection level system was drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION),...
The IPX5 and IPX6 waterproof testing machine is also known as IP waterproof testing equipment. Handheld water sprayers, flushing testing machines, etc. are an open waterproof...
The sand and dust chamber, is applicable to the antifouling test of parts and materials such as welders, electronic equipment, electrical products, Automotive lighting, motorcycles, chemical...
The scientific name of the dust sand test equipment is the sand and dust test chamber, which tests whether the product meets the IP protection level...
What is a Glow Wire Test? The glow wire test is to test the stability of electronic and electrical products when they are working. The glow...
Introduction Due to the fact that the durability and reliability of electronic devices are directly proportional to their level of water resistance, IP waterproof testing equipment...
Dustproof testing machine can also be called sand and dustproof test chamber, sand and dust test chamber and other names. It uses the medium talcum powder...
Why should there be IP waterproof grade test? IP waterproof test equipment can also be called as rain test chamber, waterproof detector, waterproof test machine, IP...
Introduction Making sure products last as long as possible is essential to manufacturing’s customer happiness and reputation. Significant difficulties arise due to dust infiltration, which may...
Introduction The Glow Wire Test is a standard for measuring the fire safety of electrical and electronic devices. The Glow Wire Test is one example of...
Waterproof testing is mainly aimed at electronic products and equipment that are used outdoors or in harsh environments. It simulates the rainwater environment under different weather...
LISUN’S waterproof test equipment is divided into 1-9 levels of waterproof grade, including IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8, and IPX9 general waterproof grade...
Introduction Customer happiness, loyalty to a brand, and bottom-line earnings are all impacted by a product’s durability in the manufacturing sector. Dust is a frequent environmental...
The dustproof test chamber is a device that uses artificial simulation systems to test products using talcum dust as the medium. It is widely used in...
What is the working principle of the water pressure waterproof test Air tightness waterproof test can be divided into many kinds, according to the detection method,...
What is Glow Wire Testing? Glow Wire Testing is used to test the stabilities of electronic and electrical products when in operation. The glow wire itself...
Introduction There is an urgent need for electrical equipment that is resistant to water. It is necessary to have IP waterproof testing equipment in order to...
1. Briefly Interpretation of Cyclic Corrosion Test The cyclic corrosion test method is a newly developed method which can reflect the influence of natural environment exposure...
The working principle of the salt spray chamber: Corrosion is the damage or deterioration caused by the action of the environment on a material or its...
1. How to Purchase Waterproof Test Equipment Waterproof test equipment refers to instruments capable of carrying out various waterproof performance tests, including pressure testing, performance testing,...
Introduction The Glow Wire Test apparatus is a flexible instrument for testing the fire safety of a wide range of electrical and electronic items. It has...
Introduction For the sake of the company’s reputation and the satisfaction of its clientele, manufacturers are tasked with ensuring that their wares continuously provide the desired...
Salt is a ubiquitous compound, which not only exists in the ocean, atmosphere, land surface, lakes and rivers, but also causes machinery or electronic products to...
Sand and dust testing, also known as sand and dust resistance test, is a destructive testing equipment that simulates the natural wind and sand climate on...
The scientific name of dustproof test chamber is sand and dust test chamber, dustproof test machine, and other various names, which is used for the product...
Waterproof tester, also known as rain test boxes, rain testing machines, etc., is used to test the waterproof performance of appliances or appliances with rainproof functions....
The Waterproof Test System is mainly used for waterproof testing or sealing testing of complete electronic products or components. Using compressed air for testing is a...
Introduction As more and more of our daily lives revolve on electrical gadgets, it’s more important than ever to keep them safe against water damage. It...
1. Introduction Electronic products encompass a wide range of products from lighting products, electronic components, mobile communication terminals and more, all including protection requirements such as...
Salt spray test chamber is also called salt spray testing machine, which is called salt spray testing machine in full, and is mainly used to test...
Introduction The corrosion resistance of materials and coatings may be evaluated using a variety of methods, two of the most common of which being salt spray...
Introduction When it comes to ensuring the reliability and safety of electrical and electronic products, certifications and compliance play a critical role in meeting applicable standards....
Introduction In the lightning-fast world of electronic device manufacturing, constant attention must be devoted to the reliability and longevity of the products being manufactured. Although it...
Introduction When it comes to electronics, liquid damage is a major concern that may compromise their performance and lifespan. Manufacturers use IP waterproof testing to determine...
Waterproof testing is used to verify the effectiveness of protective covers, shells, and sealing washers that prevent water from penetrating the product; Check the ability of...
The Glow-wire Tester is used to test the stability of electronic and electrical products during operation, and the flame retardant performance of electronic products in the...
The sand dust testing mainly simulates the wind and sand weather in the natural environment, and then conducts the test, mainly testing the wind resistance and...
Electronic products mainly include lighting products, electronic components, mobile communication terminals, and have clear requirements for external shell protection tests, such as mechanical protection, waterproof, explosion-proof,...
Introduction In today’s technologically advanced society, electronic gadgets are ubiquitous and deeply ingrained in our everyday lives. As our reliance on electronic devices continues to grow,...
Introduction It is essential to have dust proof test chambers to evaluate how effectively and for how long certain goods can tolerate exposure to dust. Manufacturers...
Introduction The Glow Wire Test gadget is a cutting-edge piece of apparatus that is used in the process of determining whether electrical and electronic products are...
Introduction The dependability and longevity of many items, particularly those used in dusty or particulate-laden environments, depend on the results of dust ingress testing. Electronic components,...
Durability and dependability of products under extreme circumstances is a top priority in the field of product testing. Products, from electronics and automobile parts to outdoor...
Introduction: The protection offered by electrical and electronic goods is of the highest significance. In order to provide assurance that the objects are resistant to fire,...
Introduction The reliability and durability of the items that customers buy has a direct bearing on the level of satisfaction and commitment they feel toward a...
Introduction The rapid development of technology has made electronic gadgets indispensable to modern living. We depend significantly on technology like smartphones, tablets, wearables, and smart home...
Precautions for procurement of sand and dust test chamber: 1. Select the required equipment test Different users have different requirements for product testing. Some users only...
The Swing Ppe Water Spray Test Equipment is divided into three types: ipx34 shower rain tester, open type and box type. The spray nozzle uses special...
The scientific name of the dust proof chamber is sand-dust test machine, dust-resistant test machine, waterproof test chamber and other different names. It is used for...
IP (Ingress Protection) protection grade system is drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION), which classifies electrical appliances according to their dust-proof and moisture-proof characteristics. The IP...
The sand dust chamber is a device that uses artificial simulation systems to simulate the impact of natural dust environment, wind and sand, and to test...
The scientific name of sand and dust test chamber is dustproof test chamber, which is implemented according to international national standard parameters such as GB4208-2017 Enclosure...
What is the waterproof jet test device? The waterproof jet test device can also be called IPX56 test device, hand-held water sprayer, flushing test machine, etc....
Waterproof test equipments is used to test the waterproof performance of appliances or appliances with rain-proof function, so that the product may be exposed to water...
Waterproof test equipments, also known as rain test box, rain test machine, etc., is used to test the waterproof performance of appliances or appliances with rain-proof...
Dustproof chamber can also be called sand dust chamber , sand dust test chamber, dust test chamber, etc. It is used to test the physical and...
Dust proof test equipment can also be called sand dust test box and dust resistance test instrument. It is used to test the dust level of...
Accidents such as natural disasters have gradually entered our lives, such as floods, mudslides, heavy rains, and other natural disasters may occur around us. For such...
IPX7 immersion tank waterproof test device is divided into two types, one is stainless steel immersion test device 1; One is a glass-type immersion test device...
What are the types of dustproof test chamber and their meanings The dustproof test chamber is divided into 1-6 categories, including IP1X dust test ball, IP2X...
What is the waterproof grade of IPX34 Swing Pipe Water Spray Test Equipment: IPX3 Swing Pipe Water Spray Test Equipment : spray holes are arranged in...
The dustproof testing machine is also called sand dust test chamber, dustproof test chamber and other different names. It is used to detect the IP dust-proof...
Waterproof test equipment, also known as rain test box, waterproof test device, rain test machine and other different names, can provide lifelike simulation of electronic equipment...
Waterproof test equipments can also be called as rain test box, ip waterproof testing machine and other names. It uses various detection methods such as simulated...
Waterproof test equipment can also be called waterproof detector, rain test box, waterproof testing machine and other different names. It can provide lifelike simulation of electronic...
Waterproof test machine is to test whether the product has waterproof performance by simulating the performance of electrical components and various products that may be drenched...
IPX5 and IPX6 waterproof test equipments are waterproof tests of two different levels. However, in LISUN, the two waterproof levels are combined into an IPX56 water...
All electronic products need to consider fire risk and potential fire hazards when designing. The design of components, circuits, products, and materials of materials need to...
The waterproof jet test chamber, as its name implies, is a waterproof test equipment with the appearance of a box type. It is mainly used to...
The IPX7 waterproof test chamber, also known as the immersion test machine, the soaking test box, the IPX7 waterproof equipmen is mainly used to test the...
To evaluate a product’s shell sealing ability by the International Protocol for the Testing of Shells, the “Dustproof test chamber” is utilized to mimic the detrimental...
Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the...
What is the ipx7 waterproof test chamber? The ipx7 waterproof test chamber, also known as the immersion test machine, the waterproof test equipment, the ipx7 waterproof...
SC-015 Dust-proof Test Chamber (Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles...
The scientific name of the sand dust test chamber is known as sand dust tester, dustproof testing machine, dustproof test chamber and other different names. It...
There are 1-6 categories of dustproof test chambers, and three types of equipment with different appearances are walk-in sand and dust chamber, double door dust chamber...
Products that have been painted, electroplated, covered with an inorganic or organic layer, handled an anode, treated with anti-rust oil, etc., may be put through their...
The drip box consists of a vertical drip tester, an IPX12 drip test chamber, etc. It uses the form of drip to perform IPX1/2 waterproof test...
To detect current leakage and poor or damaged insulation that may cause arc faults, blown circuits, and danger of electrical shock or fire, an insulation resistance...
IPX1 waterproof test operation skills: 1. After plugging in the power switch, press the red button on the operation panel to start the control system; Then...
A salt spray chamber is a useful piece of machinery to evaluate how well a substance or coating holds up against corrosion. The instrument is often...
Dust proof chamber is also known as sand dust test chamber, dust resistance tester, sand dust test chamber and other different names. It tests the physical...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
IPX12 drip tester has many names, such as rain drop testing instrument, rain drop testing machine, etc. The frame of IPX12 drip tester is composed of...
The glow wire test apparatus investigates the fire-resistant properties of raw materials and finished components. LISUN’s glow wire test equipment has been ergonomically designed to meet...
IP grade waterproof testing instrument is a grading standard of IP waterproof testing equipment, which is used to determine whether the IP waterproof of products meets...
IPX56 waterproof jet test device is composed of chassis and turntable, which can be placed separately, and movable casters are installed at the bottom of chassis...
The glow wire test is a physical experiment. The purpose is to test the stability of electronic and electrical products at work. The glow-wire tester heats...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
The salt spray test standard specifies the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value, and also puts forward...
Needle flame test and glow wire test test description Needle flame test and glow wire test are both tests used in the electrical and electronic product...
I. Salt spray test chamber| Salt spray testing simulates a corrosive salty environment in the laboratory. It is used to speed the testing of surface coatings’...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
As a type of reliability test equipment, environmental test has developed into a method to predict how the product use environment affects the performance and function....
What is Ingress Protection testing? An enclosed product’s resistance to liquid and particle infiltration is assessed during ingress protection testing. Depending on the achieved resistance to...
Salt spray test is a clear and specific regulation of salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value. In...
The salt spray corrosion test chamber measures the product’s resistance to salt spray corrosion as well as the material’s and its protective layer’s salt spray corrosion...
The LISUN IP waterproof test machine is widely used in the authentication test organization for products such as electrical & electronic products, and LED luminaires as...
A salt spray test or salt fog test is a corrosion method for checking the corrosion resistance of the materials and coatings of the surface. The...
Environmental test equipment is the general name of all test chambers simulating natural climate environment. Representative products include salt spray test chamber, high and low temperature...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
Dust chambers are a particularly effective tool for this since they may test a product or component’s ability to resist dust. Dust test chambers offer a...
The enclosure protection is divided into two parts. The first part is to prevent access to dangerous parts and solid relics, and the second part is...
What Does Salt Spray Testing Mean? An accelerated corrosion test called the salt spray test is used to compare the corrosion resistance of materials that have...
By evaluating the degree of protection given against mechanical incursion, dust, accidental touch, and water into casings and enclosures, ingress protection (IP) testing lowers the risk...
There are multiple methods for the evaluation of flammability and fire resistance of the material. They are usually direct flame and indirect flame methods. ”Direct Flame...
What is a Dust Test Chamber? A dust chamber is intended for performing different types of tests where the temperature of the sample environment must be...
There is no doubt that safety is a paramount concern in any industry. That’s why at LISUN, we focus on ensuring the highest level of safety...
LED lighting products are rapidly replacing traditional lighting products due to their superior luminous performance and high efficiency and energy saving. With people’s continuous pursuit of...
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < basic testing methods of Glow wire, basic testing...
LISUN’s Salt spray test chamber The Salt spray test Chamber is used to conduct salt spray corrosive tests on components, parts, electronic and electrical components, metal...
What is a Salt Spray Test? The salt spray test is a generalized test method used to check the coated samples’ corrosion resistance. During the salt...
What is a Water proof test? Waterproof is the ability of any material to resist water and moisture. To be classified as waterproof, the material should...
Most electronic and other device manufacturers use the IP (Ingress Protection) scale, which ranges from 1 to 8. IPX1 is the lowest level of waterproofing, indicating...
What Instrument can be used for testing impact of environment on different products? The Salt Spray Test Chamber is a piece of environmental testing equipment that...
IEC Certified Dust Test Chambers Are Correct Dust Testers Introduction Dust is intrusive contamination that can influence electronics and some other forms of equipment or machinery...
What is the glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for providing resistance to abnormal heat and fire tests on the lighting lamps,...
Security is critical in the home appliance business. The purpose of fire safety rules is to assess and rate the flammability of materials used in appliance...
Salt Spray Test Chamber Introduction The Salt Spray Test Chamber applies to the salt spray corrosion test to protect layers of the components, parts, electronic and...
Dustproof Test Chamber is defined as a chamber through which the gases pass to allow them to deposit the solid particles. It is the name of...
There are a number of corrosion tests that may be used to determine the long-term durability of protective coatings. However, the focus of this article is...
As more and more household appliances enter our daily life, and people use these electrical products more frequently, this requires that in addition to the design...
Salt spray test chambers is that your fasteners are put in, you rely on their endurance and want them to remain serviceable at all times. When...
In addition to producing a negative influence on the sensitive electronics that underlie the guidance and communications systems of today’s military vehicles, sand and dust may...
Metal components, zinc plated nuts and bolts, surface coatings, and paint may be tested for corrosion resistance in salt spray test chambers or salt fog chambers....
The reason why LED lighting is easy to spread the flame inside the equipment insulation material or other solid combustible material parts may be ignited by...
The International Electrotechnical Commission (IEC) created the IEC 60068 standard, which is widely accepted throughout the world. Environmental testing for electronic equipment, components, and electromechanical products...
Salt spray test is a kind of environmental reliability test, mainly used to test the corrosion resistance of metal materials of lamps. In order to verify...
IP (International Protection) protection level is the dust and water protection level of the product shell specified by the International Electrical Association (IEC). The requirements for...
When the dustproof test instrument fails, stop heating. After the test is completed, first turn off the operation switch, and then turn off the main switch....
The salt spray test chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other...
The salt spray test is divided into two categories, one is the natural environment exposure test, and the other is the artificial accelerated simulated salt spray...
The main purpose: The Glow Wire Tester/Glow Wire Test device is used to detect the thermal stress caused by heat sources or ignition sources such as...
The salt spray chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other anti-corrosion...
Introduction of glow-wire tester: The glow-wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such as hot...
Application: The salt spray test machine is suitable for the surface treatment of various materials, including paint, electroplating, organic and inorganic film, anode treatment, anti-rust oil,...
Introduction to Glow Wire Tester: The glow wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such...
Test method of salt spray test chamber • First power on the salt spray test chamber (plug in) • Press the red power switch, the salt...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
1. Introduction: The salt spray corrosion test equipment meets and applies to the standard GB/T2423.17-2008 for salt spray test of electrical and electronic products promulgated by...
The Salt Spray Test Chamber is an environmental test equipment that evaluates the corrosion resistance of products or metal materials by artificially simulating salt spray environmental...
To verify whether the metal parts on the product will corrode when exposed to the atmosphere or other environments, the product can be placed in the...
The Salt Spray Test Chamber can be used to evaluate the salt spray corrosion resistance of materials and their protective coatings, compare the process quality of...
The full name of IEC 60068-2-11-3.1 is <Basic environment testing procedures Part 2: Tests Test Ka: Salt mist>. It is edited by the IEC technical committee...
The full name of IEC 60695-2-10-1 is Glow/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
ISO is the worldwide union of national standards. The international standard ISO 9227 has been developed by the ISO/TC 156 Metals and Alloys Corrosion Technical Committee....
Glow Wire Test introduction: The glow wire testing uses simulation technology to assess the fire hazard of thermal stress caused by heat sources such as hot...
The test requirements for the IP level test of road vehicles lamps mainly refers to ISO20653, DIN 40050-9, and ISO12103, which defines the IP level, test...
The environmental conditions test standard for automotive exterior lighting and optical signal devices is ISO16750 <Road vehicles-Environmental conditions and testing for electrical and electronic equipment>, IEC60068-2,...
As more and more household appliances enter our daily lives, and peoples frequently use these electrical products, it required household appliances not only need meet users...
Introduction of waterproof test system: The waterproof test system includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page...
Introduction for the dust-proof chamber: The dust-proof test chamber is suitable for the dust and dust resistance tests of various auto parts. The test parts include...
The glow wire test is to test the stability of electronic and electrical products at work. The glow wire itself is actually a fixed-size resistance wire...
Waterproof testing grade reflects the ability of moisture-proof of products. Especially for outdoor activities, it is unavoidable to be in the harsh environment of high humidity....
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
In recent years, many manufacturers are planning to manufacture common global LED drive products with a wide voltage input. But since different countries have different product...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
LVD’s goal is to ensure the safety usage of low-voltage equipment. Its range of application is on electrical products with voltage at 50V to 1000V AC...
Nowadays, with the development of LED industry, its technology continues to be mature and has widely applied at home and abroad. Comparing to mature markets in...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
Glow wire test is to test the stability of electrical and electronic products during working. And the hot wire itself is the resistance wire ring with...
IEC 60529 (GB4208-2008) IP code is a coding system to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of...
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
