LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
IS 16102 (Part 1): 2026 is the latest Indian standard specifying safety requirements for self‑ballasted LED lamps used for general lighting services. Compared with the previous 2012 edition, it expands the applicable scope to cover LED lamps with a maximum input power of 60 W (up from 30 W) and includes LED lamps with built‑in non‑detachable rechargeable batteries, making it suitable for more high‑power and rechargeable lighting products.
This updated standard introduces several critical new safety measures, including abnormal operation testing, IP protection testing, and photobiological safety assessment (requiring compliance with risk groups RG0 or RG1). It also strengthens requirements for mechanical strength of lamp caps, fault conditions, insulation, and product marking, aiming to better prevent risks such as fire, electric shock, overheating, and optical hazards, while aligning with international safety norms for LED lighting products.
IS 16102(Part 1): 2026 Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements
LISUN supplies the fully test solutions for the following IS 16102(Part 1): 2026 , please see the below excel table:
| IS 16102-1: 2012 Clause and Subject | LISUN Model |
| 3.3 Cap Temperature Rise | WS-1 |
| 1O CAP TEMPERATURE RISE | |
| 6.1 Cap Interchangeability | GNG-E27 |
| 9.3 Axial Strength of Edison Caps | |
| 7 Test Finger with 10N Force | SMT-02T10 |
| 8.2 Insulation Resistance | WB2681A |
| 8.3 Electric Strength | LSP-500VARC |
| 9.2 Torsion Resistance of Unused Lamps | CH338 |
| 11 RESISTANCE TO HEAT | ZBP-T |
| GW-500 | |
| 12 RESISTANCE TO FLAME AND IGNITION | ZRS-3H |
| 14 CREEPAGE DISTANCES AND CLEARANCES | CK-1 |
| 17.1 UV Radiation | UV-263LS |
| 17.2 Blue Light Hazard | EN62471-C |
| 18 INGRESS PROTECTION | JL-X |
There are some standards focus on specifying technical requirements and test methods for different categories of lampholders in the lighting field, ensuring their safety, compatibility, and...
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN’s cable and wire test solutions meet IEC 60245-1, IEC 60227-1, IEC 60502-1 and IEC 60189 standards, covering electrical, mechanical, and safety tests for global compliance.
LISUN has all equipment according to the IEC60669 measurement, including environmental chamber, IP code waterproof dustproof test, switch lift test, etc.
LISUN’s plugs and sockets test solutions meet IEC 60884-1, IEC 60670-1, IEC 62613-1 standards, covering electrical, mechanical and safety tests for global compliance.
LISUN provide full test solutions for HID lamp, including integrating sphere system, goniophotometer system, EMI EMC chamber, HID ballast tester, electrical safety test, etc.
Lisun can supply full test solutions for fluorescent lamp, including integrating sphere system, goniophotometer system, EMI EMC test, electronic ballast tester, electrical safety test, etc.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s mobile and network test solutions include EMC/EMI testing, color glossiness measurement, IP waterproof/dustproof tests, IK impact tests, and environmental simulation, meeting international standards.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract: Non-metallic materials such as coatings, plastics, rubbers and composite materials used outdoors are exposed to long-term solar ultraviolet radiation, temperature-humidity changes, dew and rain erosion,...
Abstract: The waterproof performance of electrical and electronic product enclosures directly determines the safety, reliability and service life of equipment under humid, rainy, immersion and other...
Abstract Water spray test chambers designed for IPX5 and IPX6 waterproof testing represent critical equipment for verifying the ingress protection capabilities of electrical and electronic product...
Abstract: Glow wire flammability index (GWFI) is a core indicator for evaluating the flame retardant performance of products and plastic components in electrical and electronic engineering,...
Abstract： UV aging test chamber is a core instrument for material weatherability testing. Based on the principle of simulated environment accelerated aging, it uses UV lamps...
Abstract: This paper takes the JL‑56 IPX5 and IPX6 Waterproof Testing Machine in the LISUN JL‑X waterproof test system as the research object. Based on the...
Abstract IPX3/4 testing for lighting fixtures represents a critical validation methodology for luminaires deployed in challenging environmental conditions. This systematic analysis examines the oscillating tube apparatus...
Abstract Glow wire apparatus testing has become a critical method for evaluating flame retardancy and fire safety of electrical and electronic products. This paper presents a...
Abstract: Flame retardancy performance is a core safety indicator for electrical and electronic products, household appliances, lighting equipment and their plastic components. As a high-precision testing...
Abstract IEC 60529 IPX3/IPX4 Testing establishes the definitive methodology for evaluating enclosure protection against sprayed water in luminaire applications. This comprehensive analysis examines five critical engineering...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
On February 24, 2026, the Bureau of Indian Standards (BIS) officially released the revised safety standard for self-ballasted LED lamps for general lighting, IS 16102-1:2026, which...
Abstract: The systematic evaluation of the waterproof performance of electronic and electrical products is a critical step in ensuring product reliability and market compliance. As the...
Abstract: The water spray test is a core method for verifying the waterproof and protective capabilities of electronic and electrical products. By simulating water ingress conditions...
Abstract With the rapid development of electrical and electronic products, household appliances, lighting equipment and other industries, the flame retardancy of products and plastic components has...
Abstract With the continuous improvement of waterproof performance requirements for products in industries such as electronic and electrical appliances, auto parts, ipx8 waterproof testing (the highest...
Abstract:With the acceleration of global industrialization, the ability of electronic, automotive, and lighting equipment to withstand extreme climatic conditions has become a core measure of product...
Abstract This paper systematically elucidates the technical principles and standardized methodologies for the IPX3 and IPX4 water ingress testing, which are critical assessments within the ingress...
Abstract How to do ball pressure test? The Ball Pressure Test is a core safety assessment procedure used to evaluate the thermal deformation resistance of non-metallic...
A glow wire test apparatus is a vital tool that can be used to measure the fire hazard in electrical and electronic devices. It replicates the...
Abstract In the design and manufacturing of modern electrical and electronic products, the enclosure protection rating is a core indicator for assessing their reliability, safety, and...
The glow wire test standard is the most broadly applied test to determine the ignition resistance of insulating materials, plastics and enclosure parts subjected to overheating...
Exposure to water has become one of the leading factors of failure of the electronic and mechanized commodities which are either being used in the outdoor...
Safety inspection of electrical and electronic products in regard to fire safety is a prerequisite in the world-wide industries. As devices get smaller and denser and...
Waterproofing is a critical design consideration to current electronic and mechanical designers that consider using their products in wet or outdoor environments. Consumer electronics, industrial controllers,...
With the globalization of industries towards electrification, smart power distribution, automobile automation and electronics in consumer devices being smaller than ever, the demand has been put...
The ingress protection testing has been significantly changed in the past 10 years with the push of industries among outdoor-rated electronics, sealed industrial controls, marine-rated automation,...
Fire safety has been one of the factors that are very relevant in designing electrical and electronic products. The size of circuits is decreasing and heating...
Modern products have to resist environment conditions up to soft rains and jets of high pressure as well as short-term immersion. It does not matter whether...
Ingress protection test is one of the significant quality assurance measures of present day electrical and mechanical products. An IP test machine enables the engineers to...
Abstract This paper focuses on the LISUN ZRS-3H Glow-Wire Tester, a high-precision testing device developed by LISUN specifically for evaluating the flame-retardant properties of electrical and...
Abstract The waterproof performance of enclosure protection levels is a core indicator for measuring the reliability of electronic and electrical products, especially crucial for outdoor LED...
Abstract The flammability test for plastics is a fundamental assessment in material science and product safety, particularly for components used in electrical and electronic appliances. Among...
Abstract Ingress Protection (IP) testing, as defined by international standards such as IEC 60529, is critical for ensuring the reliability and safety of electrical and electronic...
Abstract Glow wire flammability testing is a critical evaluation method for assessing the fire safety of polymeric materials used in lighting devices, electronic products, and household...
In the ever – evolving landscape of industrial and consumer product manufacturing, the protection of internal components from environmental factors, especially water ingress, is of utmost...
Introduction In the operation and maintenance of modern electrical equipment, insulation resistance testing is a critical process for ensuring safety, reliability, and performance. This testing method...
Introduction A waterproof test chamber is a sophisticated piece of equipment designed to simulate wet environments, such as drizzle, heavy rain, spray, or full immersion, to...
Introduction In the contemporary world of electrical and electronic product design, IP (Ingress Protection) ratings serve as a crucial metric for assessing the capability of device...
Introduction In the design of modern electronic products, Ingress Protection (IP) ratings are crucial standards for assessing a device’s ability to withstand environmental factors such as...
Introduction In today’s rapidly evolving industrial landscape, ensuring the safety and reliability of materials under extreme conditions is more critical than ever. Among various testing methods,...
Abstract The insulation resistance tester plays a crucial role in ensuring the safety and efficiency of electrical equipment. The LISUN WB2681A, as an advanced insulation resistance...
In the modern world, ensuring the fire safety of electrical products and materials is of paramount importance. The quality and safety of electrical and electronic devices,...
Abstract The IEC 60695-10-2 standard, commonly referred to as the Ball Pressure Test Method, plays a pivotal role in evaluating the heat resistance of electrical components,...
Abstract This paper explores the importance of the ball press test for resistance to heat (also known as the ball pressure test) in ensuring the safety...
Abstract In the modern world, the safety of electrical and electronic products, as well as household appliances, has become a critical concern due to the potential...
Abstract Waterproof testing is a crucial part of ensuring the durability and functionality of products exposed to water or harsh environmental conditions. A reliable waterproof testing...
Abstract Flame retardancy testing is crucial for ensuring the safety of electrical and electronic products. The Glow Wire Test Procedure is a widely recognized method used...
Abstract: The IPX4 waterproof test plays a critical role in determining the water resistance of electronic devices, electrical components, and other products used in various industries....
Abstract This article explores the applications and principles of waterproof rain test chambers, focusing on their use in evaluating enclosure protection grades under various standards such...
Abstract Water quality testing equipment is often exposed to challenging environments, including water, dust, and humidity. Ensuring the equipment’s durability and reliability requires stringent waterproof testing...
Flammability testing is a critical step in assessing the safety of materials used in electrical and electronic products. The glow wire test machine, such as the...
Abstract The waterproof chamber is an essential tool for evaluating the ingress protection (IP) ratings of electronic and electrical products against water intrusion. This paper discusses...
Abstract Insulation resistance testing plays a crucial role in determining the safety and operational efficiency of electrical equipment. An essential tool for this process is the...
Abstract This paper focuses on the ZRS Glow Wire Tester, specifically the LISUN ZRS-3H Glow-wire Test Apparatus, analyzing its application in flame retardant testing within quality...
Abstract The Ball Pressure Test for IEC 60695-10-2 is essential for evaluating heat resistance in electrical products, specifically focusing on components such as plugs and sockets...
Introduction The rapid evolution of lighting systems, especially with the advent of LEDs, has raised concerns about the photobiological safety of these light sources. IEC TR...
Introduction The IP65 test is a critical procedure for determining the effectiveness of enclosures in protecting internal components from environmental factors such as dust and water....
Water resistance testing is a critical method for evaluating the durability and performance of materials and products in corrosive environments. The salt spray test, specifically, is...
Abstract Waterproof testing is crucial in ensuring the safety and functionality of electrical and electronic products in wet and humid conditions. This paper explores the principles,...
Abstract Ingress Protection (IP) testing is crucial in determining the durability and reliability of electronic devices and components exposed to environmental factors. The LISUN JL-X IP...
Electrical safety is paramount in the design and manufacturing of modern electronic devices. To prevent fire hazards and ensure product reliability, manufacturers must conduct rigorous testing...
In today’s highly competitive electronics market, product durability and reliability are critical factors that can determine a product’s success. As consumer demand for waterproof and weather-resistant...
Waterproof test chambers are critical tools for evaluating the water resistance of household, commercial, and industrial electrical and electronic equipment. These chambers adhere to international standards...
Overview Ball Pressure Test (Resistance to Heat) is a critical experiment for evaluating the heat resistance performance of insulation materials, primarily used to support and protect...
Overview Glow Wire Testing is a crucial method for evaluating the stability of electronic appliances during operation. By simulating high-temperature conditions resulting from electrical faults, this...
With the continuous development of technology and the improvement of people’s living standards, electronic products and mechanical equipment have become an indispensable part of daily life....
In-depth Analysis of Pressure Testing Methods and Standardization Guidelines Operation Steps and Methods of Ball Pressure Testing: 1. Sample Pressure Treatment: Place the sample under the...
In-Depth Analysis of Ball Pressure Test Apparatus and Standardization Guidelines of Ball Pressure Test Ball Pressure Test Procedure and Methods: • Sample Pressure Treatment: Place the...
What application of Glow wire tester? Glow wire tester is a widely used method for assessing the flammability of plastic sheets or components. This testing procedure...
The UV aging test chamber uses a fluorescent UV lamp as the light source to conduct accelerated weathering tests on the material by simulating ultraviolet radiation...
The principle of UV aging test chambers: The ultraviolet weather resistance test equipment is another type of light aging test equipment that simulates sunlight, mainly simulating...
Methods to test anti -aging and light stability often cause controversy. Over the past few years, all kinds of methods have been applied. Now most researchers...
Waterproof test machine is applicable to a wide range of products, including but not limited to electronic components, outdoor lighting fixtures, automotive accessories, communication equipment, cabinets,...
What is An Insulation Resistance Tester? Insulation resistance tester is an important technical tool to measure the protective capacity of electrical systems. It evaluates the electrical...
What is A Ball Pressure Test Ball Pressure Test is a safety regulation test to examine the heat-resistance performance of product materials. The temperature of the...
The UV Aging Test Chamber adopts fluorescent ultraviolet lamp as the light source to simulate the ultraviolet radiation and condensation in natural sunshine, and carries out...
Hot wire testing is a common method used to evaluate the flammability of materials. The Glow-wire Test Apparatus is the main tool used for this type...
The glow-wire tester is used to simulate the ignition of insulation materials or other combustible components inside equipment that may catch fire due to a hot...
The UV aging test chamber uses a fluorescent ultraviolet lamp as the light source to conduct accelerated weathering tests on materials by simulating ultraviolet radiation and...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
What is a Waterproof Jet Test Device? IPX56 Waterproof Jet Test Device, is an open waterproof test equipment that belongs to the IPX56 standard. It is...
The IPX7 Immersion tank Waterproof test Device is mainly used to test the physical and other related properties of electronic products, electrical products, lamps, electrical cabinets,...
The ipx4 Swing Pipe Water Spray Test Equipment is a waterproof performance testing equipment widely used in electronic and electrical engineering, communication, lighting, automobile and other...
In the modern society where waterproofing is ecoming more ubiquitous, more manufacturers are developing consumer products with various waterproof testing equipment. The purpose is to meet...
UV aging test chamber is a device used to simulate UV light irradiation conditions and evaluate the weatherability and durability of materials. In various industries, UV...
IPX7 Immersion tank Waterproof test Device, also known as rain test chambers, waterproof testing equipment, waterproof detectors, waterproof testing machines, IP waterproof testing machines, etc., are...
With the popularity of smart devices and increasing demands for waterproof and dustproof features in devices like smartphones and watches, waterproof and dustproof technologies have received...
Introduction The Glow Wire Test is a standard procedure for determining the combustibility of electrical insulation. It’s vital to the security and dependability of electrical and...
BS-EN-61032, this International Standard specifies details and dimensions of test probes intended to verify theprotection provided by enclosures with regard to: – protection of persons against...
Through the test of the UV aging test chamber, the performance change of the material under different ultraviolet radiation can be evaluated, such as the color...
IEC ball pressure test is a special kind of Potting test, which is used to test the insulation resistance and shell protection insulation strength of the...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
The IPX8 Immersion tank Waterproof test Device is applied to electronic components, outdoor lighting fixtures, mobile phone casings, automotive accessories, etc. It is a test that...
LED lighting fixtures are being used more and more extensively indoors and outdoors, and their waterproof performance has become an important consideration for users. LED waterproof...
Testing Flammability with Glow Wire Test Apparatus and Needle Flame Apparatus is used to determine if a substance can be ignited and pose a risk of...
The appearance of the IPX34 Swing Pipe Water Spray Test Equipment and the test chamber shell are made of blue and white paint. They have evolved...
IP Waterproof Testing Device is a high-precision testing tool for testing waterproof performance, airtightness and sealing of products. It has the advantages of precise testing and...
Introduction By replicating real-world fire events and assessing the combustibility of various materials, the Glow Wire Test equipment is an indispensable tool for detecting potential fire...
The IPX12 drip test box has the characteristics of circulating water in its box structure: for testing, it is both energy-saving and environmentally friendly. More importantly,...
UV aging test chamber have the advantages of rapid experiment and high precision devices, which can be used to simulate the external environment and evaluate the...
Waterproof Rain Test Chamber is an advanced device used to simulate atmospheric environment, so the safe use and correct operation of it is very important. So,...
Introduction The Glow Wire Test device is an essential piece of equipment for conducting fire safety tests on a wide range of materials. The capabilities and...
Introduction A crucial part of fire risk assessment is glow wire testing, which is a useful method for analyzing the fire behavior and safety capabilities of...
Temperature in the UV Aging Test Chamber: the temperature in the chamber shall be controlled according to the specified test procedure when the equipment is in...
I. Definition of Glow Wire Test The Glow Wire Tester is used to test the stability of electronic appliances when working. The hot thread itself is...
Introduction The evaluation of electronic products’ resistance to water, the assurance of their longevity, and the fulfillment of customer expectations are all facilitated by waterproof testing...
The IPX12 drip box consists of a Waterproof Test Equipment, a Waterproof Test Machine , etc. It uses the form of drip to carry out IPX1/2 waterproof...
Introduction The Glow Wire Test is an essential tool for gauging the safety of electrical and electronic components in the event of a fire. This test...
IPX7 Immersion tank Waterproof test Device indicates that the waterproof grade of the product is 7. When the product is immersed in water for a short...
The glow wire test apparatus simulates that parts of insulation materials or other solid combustible materials that are prone to flame propagation inside the equipment may...
UV aging test chamber is the result of accelerated weathering test on materials to obtain the weathering resistance of materials. It can simulate environmental conditions such...
Glow wire testing can be used to assess fire protection in electrical equipment. It is intended to simulate what an over-heated component may cause a fire...
Introduction In today’s technologically advanced society, electrical gadgets are often exposed to the elements, including water. Manufacturers put items through waterproof testing to guarantee they can...
What is the waterproof standard of the immersion tank waterproof test device: The IP (INGRESS PROTECTION) protection level system was drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION),...
The IPX5 and IPX6 waterproof testing machine is also known as IP waterproof testing equipment. Handheld water sprayers, flushing testing machines, etc. are an open waterproof...
What is a Glow Wire Test? The glow wire test is to test the stability of electronic and electrical products when they are working. The glow...
Introduction Due to the fact that the durability and reliability of electronic devices are directly proportional to their level of water resistance, IP waterproof testing equipment...
The UV chamber is also knowm as the UV aging chamber is mainly used to simulate the destructive effects of sunlight, humidity, and temperature on materials....
Why should there be IP waterproof grade test? IP waterproof test equipment can also be called as rain test chamber, waterproof detector, waterproof test machine, IP...
What is UV aging? UV aging refers to the aging process of materials caused by ultraviolet radiation. It usually occurs when materials are exposed to UV...
Introduction The Glow Wire Test is a standard for measuring the fire safety of electrical and electronic devices. The Glow Wire Test is one example of...
Waterproof testing is mainly aimed at electronic products and equipment that are used outdoors or in harsh environments. It simulates the rainwater environment under different weather...
LISUN’S waterproof test equipment is divided into 1-9 levels of waterproof grade, including IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8, and IPX9 general waterproof grade...
What is the working principle of the water pressure waterproof test Air tightness waterproof test can be divided into many kinds, according to the detection method,...
What is Glow Wire Testing? Glow Wire Testing is used to test the stabilities of electronic and electrical products when in operation. The glow wire itself...
Introduction There is an urgent need for electrical equipment that is resistant to water. It is necessary to have IP waterproof testing equipment in order to...
1. How to Purchase Waterproof Test Equipment Waterproof test equipment refers to instruments capable of carrying out various waterproof performance tests, including pressure testing, performance testing,...
Introduction The Glow Wire Test apparatus is a flexible instrument for testing the fire safety of a wide range of electrical and electronic items. It has...
The standard for UV aging test in UV aging test chamber is mainly used to simulate the damage of sunlight, humidity and temperature to materials. The...
Waterproof tester, also known as rain test boxes, rain testing machines, etc., is used to test the waterproof performance of appliances or appliances with rainproof functions....
The Waterproof Test System is mainly used for waterproof testing or sealing testing of complete electronic products or components. Using compressed air for testing is a...
Introduction As more and more of our daily lives revolve on electrical gadgets, it’s more important than ever to keep them safe against water damage. It...
Introduction When it comes to ensuring the reliability and safety of electrical and electronic products, certifications and compliance play a critical role in meeting applicable standards....
The UV aging test chamber is mainly used to simulate the destructive effects of sunlight, humidity, and temperature on materials. The ultraviolet aging test chamber simulates...
Introduction When it comes to electronics, liquid damage is a major concern that may compromise their performance and lifespan. Manufacturers use IP waterproof testing to determine...
Waterproof testing is used to verify the effectiveness of protective covers, shells, and sealing washers that prevent water from penetrating the product; Check the ability of...
The Glow-wire Tester is used to test the stability of electronic and electrical products during operation, and the flame retardant performance of electronic products in the...
Introduction In today’s technologically advanced society, electronic gadgets are ubiquitous and deeply ingrained in our everyday lives. As our reliance on electronic devices continues to grow,...
Introduction The Glow Wire Test gadget is a cutting-edge piece of apparatus that is used in the process of determining whether electrical and electronic products are...
Durability and dependability of products under extreme circumstances is a top priority in the field of product testing. Products, from electronics and automobile parts to outdoor...
Introduction: The protection offered by electrical and electronic goods is of the highest significance. In order to provide assurance that the objects are resistant to fire,...
UV aging test chamber is applicable to solar energy, automobile, parts, power, new materials, coatings, rubber and plastic, chemical, optical, electroplating, cable, printing, paint, surface treatment,...
Introduction The rapid development of technology has made electronic gadgets indispensable to modern living. We depend significantly on technology like smartphones, tablets, wearables, and smart home...
The Swing Ppe Water Spray Test Equipment is divided into three types: ipx34 shower rain tester, open type and box type. The spray nozzle uses special...
IP (Ingress Protection) protection grade system is drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION), which classifies electrical appliances according to their dust-proof and moisture-proof characteristics. The IP...
What is the waterproof jet test device? The waterproof jet test device can also be called IPX56 test device, hand-held water sprayer, flushing test machine, etc....
Waterproof test equipments is used to test the waterproof performance of appliances or appliances with rain-proof function, so that the product may be exposed to water...
Waterproof test equipments, also known as rain test box, rain test machine, etc., is used to test the waterproof performance of appliances or appliances with rain-proof...
The UV aging chamber is an experimental device used to simulate the UV radiation environment of the sun and accelerate the aging process of materials. It...
UV aging test Chamber is designed for evaluating the resistant performance of non-metallic materials, organic materials (plastics, paints, coatings, rubbers, etc.) under the specified conditions such...
Accidents such as natural disasters have gradually entered our lives, such as floods, mudslides, heavy rains, and other natural disasters may occur around us. For such...
IPX7 immersion tank waterproof test device is divided into two types, one is stainless steel immersion test device 1; One is a glass-type immersion test device...
What is the waterproof grade of IPX34 Swing Pipe Water Spray Test Equipment: IPX3 Swing Pipe Water Spray Test Equipment : spray holes are arranged in...
Waterproof test equipment, also known as rain test box, waterproof test device, rain test machine and other different names, can provide lifelike simulation of electronic equipment...
Waterproof test equipments can also be called as rain test box, ip waterproof testing machine and other names. It uses various detection methods such as simulated...
Waterproof test equipment can also be called waterproof detector, rain test box, waterproof testing machine and other different names. It can provide lifelike simulation of electronic...
Waterproof test machine is to test whether the product has waterproof performance by simulating the performance of electrical components and various products that may be drenched...
The optical radiation safety test system‘s (EN62471-C) complete band range satisfies the IEC/EN 62471/CIE S009 standard, the IEC/TR 62778 standard, the GB/T 20145 standard, the EU...
IPX5 and IPX6 waterproof test equipments are waterproof tests of two different levels. However, in LISUN, the two waterproof levels are combined into an IPX56 water...
All electronic products need to consider fire risk and potential fire hazards when designing. The design of components, circuits, products, and materials of materials need to...
The waterproof jet test chamber, as its name implies, is a waterproof test equipment with the appearance of a box type. It is mainly used to...
The IPX7 waterproof test chamber, also known as the immersion test machine, the soaking test box, the IPX7 waterproof equipmen is mainly used to test the...
What is the ipx7 waterproof test chamber? The ipx7 waterproof test chamber, also known as the immersion test machine, the waterproof test equipment, the ipx7 waterproof...
The drip box consists of a vertical drip tester, an IPX12 drip test chamber, etc. It uses the form of drip to perform IPX1/2 waterproof test...
To detect current leakage and poor or damaged insulation that may cause arc faults, blown circuits, and danger of electrical shock or fire, an insulation resistance...
IPX1 waterproof test operation skills: 1. After plugging in the power switch, press the red button on the operation panel to start the control system; Then...
One kind of testing chamber used for aging is the UV aging test chamber. Another name for the UV weathering chamber (or UV aging chamber) is...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
IPX12 drip tester has many names, such as rain drop testing instrument, rain drop testing machine, etc. The frame of IPX12 drip tester is composed of...
The glow wire test apparatus investigates the fire-resistant properties of raw materials and finished components. LISUN’s glow wire test equipment has been ergonomically designed to meet...
IP grade waterproof testing instrument is a grading standard of IP waterproof testing equipment, which is used to determine whether the IP waterproof of products meets...
IPX56 waterproof jet test device is composed of chassis and turntable, which can be placed separately, and movable casters are installed at the bottom of chassis...
The glow wire test is a physical experiment. The purpose is to test the stability of electronic and electrical products at work. The glow-wire tester heats...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
Needle flame test and glow wire test test description Needle flame test and glow wire test are both tests used in the electrical and electronic product...
With the popularity of LED lighting, the photobiological safety testing issues caused by its light radiation have attracted public attention, the most important of which is...
Aging testing is a laboratory process that determines how quickly a material degrades, allowing for the prediction of its lifespan. It can mimic the harm done...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
Definition of Photobiosafety: Photobiological safety means that the light emitted by various lamps and lamp systems (including various light-emitting devices) cannot have harmful radiation effects on...
What is Ingress Protection testing? An enclosed product’s resistance to liquid and particle infiltration is assessed during ingress protection testing. Depending on the achieved resistance to...
The LISUN IP waterproof test machine is widely used in the authentication test organization for products such as electrical & electronic products, and LED luminaires as...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
By evaluating the degree of protection given against mechanical incursion, dust, accidental touch, and water into casings and enclosures, ingress protection (IP) testing lowers the risk...
There are multiple methods for the evaluation of flammability and fire resistance of the material. They are usually direct flame and indirect flame methods. ”Direct Flame...
There is no doubt that safety is a paramount concern in any industry. That’s why at LISUN, we focus on ensuring the highest level of safety...
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < basic testing methods of Glow wire, basic testing...
What is a Water proof test? Waterproof is the ability of any material to resist water and moisture. To be classified as waterproof, the material should...
Most electronic and other device manufacturers use the IP (Ingress Protection) scale, which ranges from 1 to 8. IPX1 is the lowest level of waterproofing, indicating...
What is a ball pressure test? Under the action of high temperature, the structural properties of non-metallic materials and insulating materials will change greatly, and this...
What is the glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for providing resistance to abnormal heat and fire tests on the lighting lamps,...
Security is critical in the home appliance business. The purpose of fire safety rules is to assess and rate the flammability of materials used in appliance...
As more and more household appliances enter our daily life, and people use these electrical products more frequently, this requires that in addition to the design...
1. What are the prevention and control plans and standards for juvenile myopia? 1.1 Adolescent myopia prevention and control program: With the increasing rate of myopia...
UV test also known as UV aging test which is a process of simulating the various factors involved in the actual use of the product to...
The reason why LED lighting is easy to spread the flame inside the equipment insulation material or other solid combustible material parts may be ignited by...
The International Electrotechnical Commission (IEC) created the IEC 60068 standard, which is widely accepted throughout the world. Environmental testing for electronic equipment, components, and electromechanical products...
Introduction: UV ultraviolet aging tester can simulate the damage caused by sunlight, rain and dew to materials. UV uses fluorescent ultraviolet (UV) lamp to simulate the...
IP (International Protection) protection level is the dust and water protection level of the product shell specified by the International Electrical Association (IEC). The requirements for...
The main purpose: The Glow Wire Tester/Glow Wire Test device is used to detect the thermal stress caused by heat sources or ignition sources such as...
Introduction of glow-wire tester: The glow-wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such as hot...
Introduction to Glow Wire Tester: The glow wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such...
The full name of IEC 60695-2-10-1 is Glow/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire...
The full name of ISO 4892-1:2016 is Plastics-Methods of exposure to laboratory light sources-Part 1: General guidance. It was prepared by Technical Committee ISO/TC 61, Plastics,...
Glow Wire Test introduction: The glow wire testing uses simulation technology to assess the fire hazard of thermal stress caused by heat sources such as hot...
The test requirements for the IP level test of road vehicles lamps mainly refers to ISO20653, DIN 40050-9, and ISO12103, which defines the IP level, test...
As more and more household appliances enter our daily lives, and peoples frequently use these electrical products, it required household appliances not only need meet users...
Introduction of waterproof test system: The waterproof test system includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page...
The glow wire test is to test the stability of electronic and electrical products at work. The glow wire itself is actually a fixed-size resistance wire...
Waterproof testing grade reflects the ability of moisture-proof of products. Especially for outdoor activities, it is unavoidable to be in the harsh environment of high humidity....
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
IEC 60825-1: 2007 is a standard issued by the European Union, applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
In recent years, many manufacturers are planning to manufacture common global LED drive products with a wide voltage input. But since different countries have different product...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
LVD’s goal is to ensure the safety usage of low-voltage equipment. Its range of application is on electrical products with voltage at 50V to 1000V AC...
Nowadays, with the development of LED industry, its technology continues to be mature and has widely applied at home and abroad. Comparing to mature markets in...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
We know that LED lamps have many models. Here we introduce the main models. It is classified as bayonet, screw and so on from installation methods....
IEC/EN 62471 is to assess relative optical radiation safety of different lamps and lamp system. It fully replaces IEC/EN60825 regarding the requirements of LED products energy...
SSL (Solid State Lighting) product’s color quality is very important; people pay more and more attention to it. CRI already has 40 years history. CIR is...
Under the effect of high temperatures, the structural characteristics of non-metallic materials, insulation materials will change greatly, which manifests itself softened or melted. Ball pressure test...
IEC/EN62471 is the European Union’s testing standards for laser products (including LED). IEC/EN 62471 is designed to evaluate the optical radiation hazards associated with different lamps...
UV aging test chamber is suitable for the aging test of non-metallic materials resistant to sunlight and artificial light. Light source adopts eight UV fluorescent lamps...
Glow wire test is to test the stability of electrical and electronic products during working. And the hot wire itself is the resistance wire ring with...
IEC 60529 (GB4208-2008) IP code is a coding system to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of...
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
