UV-263LS UV Aging Testing Chamber is Designed According to ISO 4892-1:2016-1 Scope

The full name of ISO 4892-1:2016 is Plastics-Methods of exposure to laboratory light sources-Part 1: General guidance. It was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 6, Aging, chemical and environmental resistance. We will introduce the ISO 4892-1:2016-1 Scope.

The following is the original content of ISO 4892-1:2016-1 Scope.
This part of ISO 4892 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing plastics to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated weathering or artificial accelerated irradiation device.

Pls. NOTE in this part of ISO 4892, the term “light source” refers to radiation sources that emit UV radiation, visible radiation, infrared radiation or any combination of these types of radiation.

This part of ISO 4892 also provides information on the interpretation of data from artificial accelerated weathering or artificial accelerated irradiation exposures. More specific information about methods for determining the change in the properties of plastics after exposure and reporting these results is given in ISO 4582.

LISUN designed the UV-263LS UV Aging Testing Chamber according to the ISO 4892-1:2016-1 standard. It can provide the best UV sunlight simulation, and it is easy to use and operate. The tester is equipped with automatic spraying function. The following is the picture of UV-263LS UV Aging Testing Chamber.

UV-263LS UV aging test Chamber

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support.
Tech Dep: [email protected], Cell/WhatsApp: +8615317907381
Sales Dep: [email protected], Cell/WhatsApp: +8618917996096