IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 1: General requirements

Scope

This part of international standard IEC 60227-1:2007 applies to rigid and flexible cables with insulation, and sheath if any, based on polyvinyl chloride, of rated voltage up to and including 450/750 V used in power installations of nominal volatge not exceeding 450/750 V a.c.

The particular type of cables are specified in IEC 60227-3, IEC 60227-4, etc. The code designations of these types of cables are given in Annex A.

IEC 60227-1 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 1: General requirements

Wires Cables Test Solution

LISUN supplies the fully test solutions for the followingIEC 60227-1:2007, please see the below excel table:

IEC 60227-1:2007 Clause and Subject	LISUN Model
Clause 4.2.3 Durability	LS-B36
Clause 5.6.3.1 Flexing test for flexible cables	WDT-B42
Clause 5.6.3.2 Bending test for tinsel cord	SW-6
Clause 5.6.4 Flame retardance	RSB-WC
Table 1
Reference No.4 Heat shock test	HLST-500D
Reference No.5 Pressure test at high temperature	GNGPL-3610-2PA
Reference No.7 Elongation test at low temperature	LS-B40
Reference No.8 Impact test at low temperature	DWC-1
Table 2
Reference No.1 Tensile strength and elongation at break	PULL-2000KG
Reference No.1.2 Properties after ageing in the air oven	GW-225-400