IEC 60730-1:2022 Automatic Electrical Controls – Part 1:General Requirements

IEC 60730-1:2022 sets out the general safety and performance requirements for automatic electrical controls used in appliances and fixed installations. It covers structural inspection, electrical tests, mechanical durability, environmental ageing, fire risk evaluation and EMC immunity. Special attention is given to software safety assessment for Class B and Class C electronic controls.

Multiple mandatory tests are referenced in this standard, many of which correspond to LISUN’s test equipment portfolio. The standard also establishes overvoltage category classification rules in Annex D to determine impulse withstand voltage, insulation coordination, creepage and clearance for different installation scenarios.

LISUN supplies the fully test solutions for the following IEC 60730-1:2022, please see the below excel table:

IEC 60730-1:2022 Clause and Subject	LISUN MODEL
6 Protection against electric shock	SMT-1213
7. Provision for protective earthing	LS9955
15 Electric strength and insulation resistance	LS9955
11.2 Clearances test finger in Figure 5	SMT-PB
14 Moisture and dust resistance	SC-015
14 Moisture and dust resistance	GDJS-015B
18 Environmental stress	GDJS-015B
20.2 Impact resistance	IK01-07
20.4 In-line cord controls	LS-DDT1-B
20.8 Flexing-test	SW-6
21 Resistance to heat, fire and tracking Annex G Resistance to heat, fire and tracking tests	ZBP-T
	ZRS-3H
	TTC-1
22 Resistance to corrosion	YWX/Q-010
23 Electromagnetic compatibility (EMC) requirements – Emission	EMI-9KB
25.5 Surge immunity test	SG61000-5
25.6 Electrical fast transient immunity test	EFT61000-4
25.7.1 Immunity to conducted disturbances	RFCI61000-6
25.7.2 Immunity to radiated electromagnetic fields	RFRI61000-3
25.8 Electrostatic discharge	ESD61000-2
25.9 Immunity to power-frequency magnetic fields	PFM61000-8A
25.10 Test of the influence of voltage dips and voltage interruption in the power supply network	CSS61000-11