English

中文简体

English

Home Standards SASO 2870 Energy Efficiency, Functionality, and Labeling Requirements for General Light Sources

SASO 2870 Energy Efficiency, Functionality, and Labeling Requirements for General Light Sources

Scope

Published on June 23, 2015, the Saudi Standard SASO 2870/2015 came into force on May 1, 2016. This standard sets the energy efficiency, functionality, and labeling requirements for indirect and direct general light sources with a luminous flux between 60 lumens and 12,000 lumens. The standard is implemented in two stages:
• First Stage (effective from May 1, 2016): Covers indirect and direct lamps equal to or above 60 watts.
• Second Stage (effective from May 1, 2016): Covers all indirect and direct lamps below 60 watts.
Additional Requirements
The standard also includes requirements related to safety, electromagnetic compatibility, and hazardous chemicals.
Covered Lighting Products

The lighting products covered under this standard include:
• Incandescent lamps
• Compact fluorescent lamps with integrated ballast (CFLi)
• Halogen lamps
• Light-emitting diode (LED) lamps (Incandescent retrofit types)
• Light-emitting diode (LED) lamps (Halogen retrofit types)

Compliance and Certification:
All manufacturers and exporters of lighting products within the scope of this standard must comply with its requirements and register with SASO to obtain an Energy Efficiency Certificate. Registered lighting products must affix the corresponding Energy Efficiency Labels. Additionally, all lighting product shipments will be inspected by Saudi Customs upon arrival to ensure the presence of the Energy Efficiency Label, Energy Efficiency Certificate, and Certificate of Conformity.

SASO 2870 Energy Efficiency, Functionality, and Labeling Requirements for General Light Sources

LISUN following instruments fully meet SASO 2870 Energy Efficiency, Functionality, and Labeling Requirements for General Light Sources:

SASO 2870:2015 Clause and Subject	LISUN Model
2.2 Ballast	WT5000
2.2 Beam angle(Table 15)	LSG-6000
2.2 Chromaticity, color rendering, CCT and so on	LMS-6000
2.2 Lamp Lifetime	SY2036
2.2 Lamp Start time	LSRF-3
2.2 Lamp lumen maintenance(Annex Table 14: multiplication factors for lumen maintenace)	LEDLM-80PL LEDLM-84PL
4.1 Energy effciency requirements(Annex C table 2 and Annex F Table 8, Table 9 and Annex H Table 13	LPCE-2(LMS-9000)
4.4 Hazardous chemicals(Annex I Table 16, 17 &18)	EDX-2A