LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
CISPR 14-1:2016 (EN 55014:2021) is an international standard focusing on electromagnetic emission requirements for household appliances, electric tools, and similar apparatus. It specifies limits for radio-frequency conducted and radiated disturbances, including continuous disturbance voltage and disturbance power, aiming to restrict the electromagnetic interference emitted by such devices. The standard details measurement methods, including requirements for measuring equipment, test setups, and procedures, ensuring that the emission levels of the apparatus under test do not exceed the specified limits to meet compliance.
This standard applies to a wide range of products, covering both mains-powered and battery-operated appliances, electric tools, and electric toys whose main functions are realized by motors, switches, etc. It aligns with relevant international technical norms and has been updated to enhance applicability—for instance, incorporating products like induction cookers, clarifying test conditions, and introducing requirements for evaluating measurement uncertainty. By establishing these emission requirements, it contributes to reducing electromagnetic interference between devices and maintaining the normal operation of the electromagnetic environment.
LISUN supplies the fully test solutions for the following CISPR 14-1:2016(EN 55014:2021), please see the below excel table:
| CISPR 14-1:2016(EN 55014:2021) Clause and Subject | LISUN MODEL |
| 4.3.2 Frequency range 9 kHz to 30 MHz | EMI-9KA |
| 4.3.3 Frequency range 150 kHz to 30 MHz | EMI-9KB |
| 4.3.4 Frequency range 30 MHz to 1 000 MHz | EMI-9KC |
| 5.3.4 Radiated emission – 30 MHz to 1 000 MHz | |
| 5.1.3 Artificial Mains Network (AMN) | LISN-C |
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
Abstract Electromagnetic Compatibility (EMC) is a core access indicator for electronic and electrical equipment to enter the global market. The EMI and EMC Test System performs...
Abstract: Electromagnetic interference (EMI) is a key factor restricting the reliability and compliance of electrotechnical electronic products. Conducted interference propagates through power lines and signal lines,...
Abstract Electromagnetic interference (EMI) is a key factor affecting the electromagnetic compatibility (EMC) of electrical and electronic products. Quantitative measurement of conducted interference and radiated interference...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
On February 24, 2026, the Bureau of Indian Standards (BIS) officially released the revised safety standard for self-ballasted LED lamps for general lighting, IS 16102-1:2026, which...
Abstract:Understanding what is artificial network in EMC testing is fundamental to conducting reproducible conducted electromagnetic interference (EMI) measurements. An artificial network, also known as a line...
Abstract: Electromagnetic Interference (EMI) is a core factor restricting the electromagnetic compatibility (EMC) of electrical and electronic products. As a key part of product compliance certification...
Abstract: Electromagnetic interference (EMI) is a key factor restricting the electromagnetic compatibility (EMC) of electrical and electronic products. Quantitative measurement of conducted interference and radiated interference...
Abstract EMC instruments form the core toolkit for verifying the electromagnetic compatibility (EMC) of electrical and electronic products. Their fundamental task is to precisely measure and...
The main measurement device in conducted and radiated emission tests is an EMI test receiver. Antennas LISNs and test sites get significant coverage but the receiver...
A Line impedance stabilization network is an underlying piece of conducted EMI testing since it establishes a known and reproducible electrical environment between equipment under test...
EMC compliance testing is used to confirm that an electrical or electronic device does not emit objectionable electromagnetic disturbances or does not excessive become susceptible to...
Instrumentation alone does not give an accurate EMI EMC measurement. It is the sum total of a well-adjusted arrangement with the electromagnetic environment working jointly with...
EMI-9KB is popularly utilized in compliance and pre compliance laboratories to obtain fine EMI testing, and a repeatability and stability of testing is of utmost significance....
EMC conducted emissions testing is one of the starting activities in the contemporary compliance and product development laboratories. It measures unwanted radio frequency energy that travels...
A good and consistent EMC measurement equipment is crucial in a lab doing compliance test and product development. One component of that ecosystem, which is critical,...
With the growth of faster, smaller, more interconnected electronic systems, the control of unwanted electromagnetic emissions has become a major task of engineers. It is crucial...
Proper measurement of undesired emissions is an essential need in the contemporary electronics. In compliance testing, the engineers are required to maintain emission within the limits...
The choice of the appropriate measurement instrument is regarded as one of the most significant choices of any EMC laboratory. EMI test receiver is an integrated...
The most difficult of the electronics designs to design in terms of electromagnetic compatibility are switching power supplies and SMPS-based circuits. High switching frequencies, short edge...
Electromagnetic compatibility has turned out to be a prerequisite in all industries that use electronics. The higher the digital complexity of products, which are increasingly smaller...
Conducted Emission measurement has a great dependence on electromagnetic compliance testing. Also, in laboratories testing switching power supplies, electronic appliances, industrial controls, medical systems, and automotive...
The proper use of EMI receiver in advanced laboratories and compliance facilities is important to obtain accurate electromagnetic measurements. Electronic systems are becoming densely connected, high-speed...
In case a product fails the EMC tests, the engineers are not only faced with a problem of identifying the failure, but also finding answers to...
The calibration of an EMI analyzer happens to be one of the most significant processes in electromagnetic compatibility laboratories and particularly, high sensitivity EMC, where even the...
The need to obtain an electromagnetic compatibility has now become a fundamental need in virtually all electronic devices, and such need has also made the need...
The modern electronic devices use the environment abundant in the electromagnetic energy, and the reaction to such fields is somehow observed in each circuit, cable or...
Modern wireless equipment relies on a high level of performance of the antenna to ensure constant communications, precise data transmission, and general durability of the equipment....
Hong Kong International Autumn Lighting Fair, October 27-30, 2025 — LISUN GROUP, a world-leading supplier of lighting solutions, was invited to participate in the 2025 Hong...
Abstract With the widespread application of electronic equipment, electromagnetic compatibility (EMC) has become a key indicator in product design and production. This paper takes the LISUN...
Abstract: With the rapid development of electronic technology, the number of electronic devices is increasing daily, and their operating frequencies are becoming higher, leading to an...
Abstract Conducted emissions, a critical component of electromagnetic interference (EMI), refer to the propagation of unwanted electromagnetic energy through conductive media such as power lines, cables,...
Introduction Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) testing are critical processes in the development and certification of electronic devices. These tests ensure that devices operate...
Introduction As electronic devices become increasingly complex and ubiquitous, electromagnetic compatibility (EMC) and electromagnetic interference (EMI) have emerged as critical factors in the design, manufacturing, and...
Electromagnetic Interference (EMI) emissions testing is a critical process in ensuring that electronic devices and systems operate within regulatory limits. This testing measures both conducted and...
Abstract: This paper focuses on the LISN (Line Impedance Stabilization Network) coupling/decoupling network used in radiation testing, with a particular emphasis on its application in the...
Abstract Electromagnetic interference (EMI) emissions are a critical concern in modern electronic device design and testing. The LISUN EMI-9KB EMI Test Receiver is a state-of-the-art automatic...
Abstract The radiated interference test plays a pivotal role in ensuring that electronic devices comply with electromagnetic compatibility (EMC) standards. This paper focuses on the principles,...
Abstract: This paper focuses on the essential aspects of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC). It begins with an in-depth exploration of the working principles...
Abstract Conducted interference testing is a critical process in evaluating the electromagnetic compatibility (EMC) of electronic devices and systems. This paper provides a comprehensive analysis of...
Abstract: Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) are key factors in ensuring that electronic devices and systems operate without causing or being affected by harmful...
Introduction Electromagnetic Interference (EMI) is a significant concern for the performance and reliability of electronic devices. EMI measurements are crucial to ensuring that devices comply with...
Electromagnetic Interference (EMI) is a critical issue in electronic device design and manufacturing, as it can disrupt the functionality of both the device itself and nearby...
Abstract Electromagnetic compatibility (EMC) is crucial for lighting products to ensure their performance does not interfere with other electronic devices. This study uses the EMI-9KB to...
Introduction Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) are critical aspects of modern electronics and communication systems. As electronic devices become increasingly prevalent and complex, ensuring...
Abstract EMI and EMC testing are critical processes in ensuring that electronic devices operate reliably without causing interference to other equipment. The LISUN EMI-9KB EMI Test...
Abstract In the modern technological landscape, ensuring that electronic devices meet electromagnetic compatibility (EMC) standards is essential. EMC testers, particularly those designed for EMI (Electromagnetic Interference)...
Hong Kong, October 27-30, 2024 – LISUN is excited to announce its participation in the 2024 Hong Kong Lighting Exhibition from October 27th to 30th. As...
With the development of technology, LED lighting fixtures have significant advantages in energy efficiency, lifespan, and color temperature. However, at the same time, LED fixtures also...
LISUN, a leading provider of lighting testing and measurement solutions, is excited to announce its participation in the International Trade Show of Lighting Equipment Light 2024...
With the rapid development of technology, electronic products are becoming more and more popular, and electromagnetic interference problems are also emerging. Electromagnetic interference can affect the...
Dubai, 16th-18th, January, 2024 – LISUN will participate in the Lighting Exhibition held in Dubai from January 16th to 19th, 2024. As a leading global supplier...
Introduction Electromagnetic compatibility (EMC) is significant in the field of industrial automation, where continuous production processes are essential for success. Numerous electronic devices coexisting in industrial...
In recent years, with the popularity of electronic devices and the rapid development of wireless communication, the potential harm of electromagnetic field radiation to human health...
Introduction Electric vehicles (EVs) are increasingly becoming the vehicle of choice for those who are worried about the effect their actions will have on the environment....
Introduction The widespread connectivity and seamless data interchange made possible by the IoT have dramatically altered the ways in which we use technology. But as the...
Introduction For the performance of missions and the protection of people, defense and military applications need dependable communication networks. Electromagnetic interference (EMI) is only one of...
Introduction Because of the convenience, efficiency, and coziness that they bring into our homes, appliances have evolved into an absolutely necessary component. The proliferation of electronic...
Introduction The semiconductor sector is crucial to the operation of today’s technological marvels, since semiconductor chips are the backbone of all electronic gadgets and infrastructure. The...
Introduction Electronics are very important to a variety of marine pursuits, including navigation, communication, propulsion, and a variety of other on-board operations. However, the sea environment...
Introduction The use of RFID systems, which use radio waves to identify and track objects, has spread across many sectors because of the advantages they provide....
Introduction Data centers are mission-critical facilities because of how they hold and facilitate the functioning of so much IT hardware and software. For companies to continue...
Introduction As the usage of electric vehicles grows increasingly popular, it is essential to provide a charging infrastructure that is robust and trustworthy for EVs. If...
Introduction Wearable healthcare technologies have fundamentally revolutionized personal monitoring, since they now make it feasible for individuals to monitor and regulate their health in real time....
Introduction The quest for smarter and more efficient systems on the power grid has resulted in the development of technologies that are used in smart grids....
Introduction Drones, also known as Unmanned Aerial Vehicles (UAVs), are gaining popularity as tools for a variety of applications, including surveillance, aerial photography, surveying, and package...
Introduction Powering electronic gadgets, from smartphones to electric cars, through wireless charging systems is a rapidly growing industry. The effectiveness and compatibility of these systems may...
Introduction Self-driving cars are a game-changing innovation that might completely alter the transportation landscape. Electromagnetic interference (EMI) is a possible threat to the safety and performance...
From October 27th to October 30th, 2023, LISUN participated in the world -renowned Hong Kong International Lighting Fair（Autumn Edition）. This exhibition is an important event in...
Introduction Accurate diagnosis and treatment planning are only possible with the use of medical imaging, which plays a crucial role in contemporary healthcare. The quality of...
Introduction Telecommunication networks are the backbone of today’s communication systems, allowing for the unhindered transfer of text, audio, video, and other types of data. Electromagnetic interference...
Introduction When it comes to meeting the world’s energy demands and reducing environmental damage, renewable energy systems like solar photovoltaic (PV) arrays, wind turbines, and energy...
Introduction The railway system is an important part of the transportation network because it allows people and products to move quickly and safely. Electromagnetic compatibility (EMC)...
Introduction Keeping devices and systems electromagnetically compatible (EMC) and functioning reliably is of utmost significance in the field of power electronics. Internal and external sources of...
Introduction The development of IoT devices is resulting in a more interconnected society. IoT devices are transforming many different industries, from smart homes and wearables to...
In recent years, with the popularity of electronic devices and the rapid development of wireless communication, the potential harm of electromagnetic field radiation to human health...
Introduction In the aerospace and defense industries, where the reliable operation of critical systems is of utmost importance, ensuring electromagnetic compatibility (EMC) is crucial. The coexistence...
Spectrum Analyzers and EMI Receivers are very common in LED Lighting, home appliances, communications and power tools testing, and many tests can be completed independently. So...
Introduction: The diagnostic, therapeutic, and monitoring capabilities provided by medical devices are essential in modern healthcare. The safe and dependable functioning of these devices is of...
Introduction: Modern civilization would not be able to function without wireless communication devices, which allow for instantaneous connection and data sharing. Although the usage of wireless...
Introduction: Significant difficulties are introduced by electromagnetic interference (EMI) to the reliable functioning of electronic equipment. To ensure electromagnetic compatibility (EMC) compliance, EMI test receivers are...
I. Introduction: Testing for electromagnetic compatibility (EMC) is crucial to creating safe and compliant products. EMC testing has always been done in dedicated labs using large,...
Introduction: The term “electromagnetic compatibility” (or “EMC”) refers to the ability of electrical equipment to function without causing interference to one another or to other systems....
The electromagnetic interference (EMI) caused by the noise caused by switching topology devices (even small power devices) is a continuous problem. Noise will not only affect...
Recently, a notice issued by the China Consumers Association concerning the power supply plug of computers having radiation interference higher than the national standard was released,...
Introduction: To guarantee the electromagnetic compatibility (EMC) of electronic devices and systems, EMI testing is essential. The manual testing process is increasingly inefficient and time-consuming due...
The terms electromagnetic compatibility (EMC) and electromagnetic interference are often used interchangeably when talking about the testing of commercial electronic goods and products. Because the two...
Introduction: Analysis of electromagnetic interference (EMI) is essential for assuring the EMC of electronic equipment and systems. Modern EMI test receivers use complex signal processing methods...
Introduction: Keeping electronic devices and systems running smoothly is complicated by electromagnetic interference (EMI). Transient interference incidents during regular device operation must be monitored and dealt...
With the development of science and technology, more and more digital, high-speed electrical and electronic equipment are widely used in all fields of society. While promoting...
EMC (electromagnetic compatibility) includes two parts: EM (electromagnetic sensitivity) and EMI (electromagnetic interference). Usually we call solving the EMC problem. In fact, it is to solve...
Introduction: The reliable functioning of electronic equipment across industries relies heavily on electromagnetic interference testing. The growth of wireless technologies and the growing complexity of electronic...
I.Basic knowledge of EMI receiver EMI receiver, also known as Electromagnetic Interference Measurement Instrument, is the most widely used and basic measuring instrument in electromagnetic compatibility...
In recent years, the issue of Electromagnetic Interference (EMI) has gained more and more attention. There are two forms of EMI, namely conducted interference and radiated...
Introduction: Electromagnetic compatibility (EMC) testing plays a critical role in ensuring the reliable operation of electronic devices and systems in various industries. EMI test receivers are...
I.What is EMI? Electromagnetic interference is the “decline of equipment, transmission channel or system performance caused by electromagnetic crosstalk”. Electromagnetic crosstalk is only an electromagnetic phenomenon,...
Introduction The amount of electronics included into modern automobiles has grown exponentially along with the development of automotive technology. These developments have many positive outcomes, but...
EMC test receiver is an instrument used to test whether electronic products comply with EMC standards. When electronic equipment is in use, it will generate electromagnetic...
Introduction: Problems with electromagnetic interference (EMI) are a major obstacle to achieving EMC in electronic equipment. To overcome these obstacles, EMI test receivers are important for...
Introduction Today’s highly technological society has made electromagnetic interference (EMI) a major issue. An ever-increasing quantity of electromagnetic emissions threatens the correct operation of surrounding electronic...
Introduction Electronic devices are becoming more widespread in today’s interconnected society. This category includes a wide range of electronic devices, from mobile phones and laptops to...
Introduction Our increasingly complex technological devices are now fundamental to everyday life. “Electromagnetic interference” (EMI) is the problem that occurs when several electronic equipment that generate...
In addition to the selection and circuit design of components, good printing circuit board (PCB) design is also a very important factor in electromagnetic compatibility. The...
With the development of electronic technology, household electrical products are becoming increasingly popular and electronic, and the increasingly developed radio, television, post and telecommunications and computer...
Electromagnetic interference (EMI) is a phenomenon that may occur when an electronic device is exposed to an electromagnetic (EM) field. Any device that has electronic circuitry...
Emissions of electromagnetic radiation are carefully detected by EMI test receivers, which are incredibly precise machines intended to detect such emissions. The LISUN EMI test system...
Electro-magnetic interference (EMI) It is the unwanted noise or interference in an electrical route or circuit. It is brought on by an external source called electromagnetic...
1. Introduction With the rapid development of modern science and technology, electronics, power electronics, and electrical equipment are more and more widely used. The high-density, wide-spectrum...
Electromagnetic Interference (EMI) Testing is electronic noise that interferes with cable signals and reduces signal integrity. EMI is typically generated by sources of electromagnetic radiation such...
An EMI Receiver reduces the reliability of cable signals. This is done by interfering with them. It is a form of electronic noise. Machines and motors...
At present, the problem of electromagnetic compatibility of electronic products has attracted more and more attention. Especially developed countries in the world have formed a complete...
Introduction An EMI receiver measures electromagnetic disturbances by employing traditional stepped scans or ultrafast FFT-based time domain scans. This is done during the construction of the...
A crucial piece of equipment for EMC testing is a spectrum analyzer. Spectrum analyzers with EMC-specific capabilities have become much more affordable in recent years. Spectrum...
Before a product is introduced to the market, EMC testing is necessary to obtain an Electromagnetic Emission and Immunity test certification. However, the cost of performing...
EMC test is the full name of electro magnetic compatibility. It refers to the comprehensive evaluation of the electromagnetic field interference (EMI) and anti-interference ability (EMS)...
Electronic noise, also known as electromagnetic interference, impedes cable communications and weakens their integrity. Typically, machinery and motors that emit electromagnetic radiation serve as EMI receiver...
EMC test, also known as electromagnetic compatibility, refers to the comprehensive evaluation of electromagnetic interference EMI and anti-interference capability EMS of electronic products. It is one...
Electromagnetic interference is mainly divided into radiation type interference and conduction type interference. The electromagnetic interference transmitted through space belongs to radiation type, and the electromagnetic...
EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is produced by the full closure structure and strong...
With the development of science and technology, more and more digitized, high-speed electrical and electronic equipment is widely used in various fields of society, while promoting...
What is EMI receiver? Electromagnetic Interference (EMI receiver) is electronic noise that interferes with cable signals and reduces signal integrity. EMI Receiver is usually generated by...
EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is produced by the full closure structure and strong...
EMI receivers are defined as the high performance instrumentation that acquire data for analysis. EMI receivers are used in the scenarios where transient signals or spurious...
How can we classify if an electronic system will disturb our surroundings or not? Independently of any measurement technique, we need a measuring instrument to characterize...
The EMI receiver is one of the most useful devices to be used in an EMC test chamber in an Electromagnetic Compatibility (EMC) laboratory or engineering...
What is an EMI receiver? Electronic noise that interferes with cable transmissions and decreases signal integrity is known as Electromagnetic Interference or an EMI receiver. Electromagnetic...
EMI receivers are a very good tool for analyzing EMI spectrums. This article will investigate alternatives such as spectrum analyzers. We will see how LISUN’s EMI...
Electromagnetic interference is one of the most difficult problems to solve when producing an electronic device. It is also known as EMI. The influence of these...
Introduction The EMI-9KB is an automatic EMI receiver system for radiation conduction or conducted emissions testing. THE FOLLOWING CLOSURE STRUCTURE PRODUCES the EMI-9KB receiver and a...
1. What is a conducted disturbance test? 1.1 Introduction of conducted interference: Electromagnetic interference (EMI)-The interference signals generated by electronic devices are transmitted through wires or...
The concept of electromagnetic compatibility IEC 60050 (161) is equivalent to GB/T4365-1995 “Electromagnetic Compatibility Terminology”, which defines EMC as “equipment or system can work normally in...
A key design challenge in designing a power bank is passing EMI testing. Electronics engineers often worry about failing EMI tests. If the circuit EMI test...
As the speed of integrated circuits is getting faster and the density is getting bigger and bigger, there will inevitably be interference problems, and we must...
Electromagnetic compatibility difficulties in electrical engineering include the impact of electromagnetic coupling, electronic switching, and semiconductor devices on power quality. Restricting or reducing electromagnetic energy creation,...
LED chip are small in size, low energy consumption, long life, and other advantages, which promote their rapid development and are widely used in various fields...
Electromagnetic Interference(EMI Receiver) Introduction: Electromagnetic Interference (EMI receiver) is electronic noise that interferes with cable signals and reduces signal integrity. EMI Receiver is usually generated by...
Electromagnetic disturbance that degrades the performance of electrical equipment or electronic device, works abnormally or fails. It can be divided into conducted interference test and radiated...
Electromagnetic interference (abbreviated as EMI) refers to the interference phenomenon caused by the interaction of electromagnetic waves and electronic components. There are two types of conducted...
Working principle of shielding room: Computers, communicators, and electronic equipment will generate electromagnetic waves of certain strength during normal operation. The electromagnetic waves may interfere with...
There are many customers feedback that their LED luminaires can’t pass CE Certificate EMI Radiation Test (30-300MHz) in 2019 year but it is the same one...
Fair: HKTDC Hong Kong International Lighting Fair 2019 (Autumn Edition) Date: 2019/10/27-2019/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong...
Fair: LED Expo New Delhi Date: 2019/11/14-2019/11/16 City: New Delhi Exhibition Hall: India Expo Centre, Great Noida, India Organizers: messe frankfurt Booth of LISUN: L45 LISUN...
Fair: HKTDC Hong Kong International Lighting Fair 2019 (Autumn Edition) Date: 2019/10/27-2019/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong...
Electromagnetic Compatibility EMC refers to the ability of a device or system to function properly in its electromagnetic environment and does not constitute an electromagnetic disturbance...
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
LISUN has participated in this India lighting exhibition for four years and has developed a large market in India. We will continue to participate in the...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
LED Expo Delhi is a 3 day event being held from 30 November to the 2 December 2017 at the Pragati Maidan in New Delhi, India....
Interlight Moscow is held from November 7 to 10, 2017, Interlight Moscow is not only the biggest show in Russia and Eastern Europe covering the whole...
Thailand International Lighting Fair is the most influential international professional lighting fair in Thailand. Fair Dates: 16-18 November 2017 Fair Venue: Bangkok International Trade & Exhibition...
Interlight Moscow powered by Light + Building is the only trade fair in Russia and the CIS covering the whole range of products relating to above stated...
The Hong Kong International Lighting Fair has become the largest industry exhibition in Asia, and the second largest in the world. LISUN participates this exhibition every...
The Istanbul Lighting Exhibition is the only professional LED application exhibition in Turkey, where all the players in the lighting industry come together under a same...
HKTDC Hong Kong International Lighting Fair (Autumn Edition) 2017, organized by the Hong Kong Trade Development Council at the Hong Kong Convention and Exhibition Centre (HKCEC)...
Istanbul Light is an international platform, where all the players in the lighting industry come together under a same roof and where the latest technologies and...
In September and October 2013, Chairman Xi put forward a major initiative of building “The Silk Road Economic Belt” and “The 21st Century Maritime Silk Road” (referred to...
With the widespread use of electrical and electronic equipment, the problem of electromagnetic disturbance has also brought electromagnetic pollution. EMC(Electro Magnetic Compatibility) refers to the ability...
The three loop antenna are often used during electromagnetic radiation test. Lisun three loop antenna VVLA-30M is a standard measurement antenna according to CISPR15-2005. It can...
LEDs and LED luminaires with high light efficiency, longer lifetime, better energy saving and environmental friendly advantages to achieve top position on the lighting industry, like...
RF LED light is emitting diode by converting the RF energy into light energy. LED lights are not always RF LED lights, for example, if the...
Standards GB17743-2007 / CISPR 15:2005 <Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment> instead of the standards GB 17743-1999...
India lighting market develops rapidly, research reports point that LED lighting market scale will reach 1.14 billion dollars, growth 47.1%. India government intends to make India...
At the end of October 2016, Lisun attended lighting fair in as in previous years. Hongkong International Lighting Fair has been an ideal platform for LED...
In October 5th-7th 2016, New Delhi LED lighting exhibition held in New Delhi, the capital of India. As one of India’s largest LED lighting exhibition, New...
Now, the led COB package, in fact, we can know that most of the COB package, including Japan COB packaging technology, they are based on the...
Lisun will come with professional technical team to attend 2016 Germany Frankfurt Lighting Fair( Light + Building) dated on 13th Mach ~18th March, 2016. This time...
The 2015 New Delhi Autumn LED Expo was successfully held during 3th December~5th December. As one of India biggest exhibition, this exhibition main relate different lighting...
It is the second time we have attended the fair, and it is a successful and wonderful fair. Lisun’s booth attracks numerous people’s visit.
During the exhibition, Lisun showed its main instruments which attracted many customers to stop and talk. Among them, there are not only many old customers hope...
As in previous year, Lisun and its instruments appeared at booth ED-A01 of Hong Kong International Lighting Fair (Autumn Edition) during 27th October to 30th October....
LISN is short for Line Impedance Stabilization Network. LISN is important assistant equipment for EMC test in the power system. It can isolate the disturbance from...
Recently, there have a new that the China Consumer Association announcement computer failure excessive radiation harassment, that easy to affect the power grid equipment and cause...
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
