IS 16102 (Part 2): 2026 specifies the performance requirements for self‑ballasted LED lamps used for general lighting services in India, complementing the safety provisions defined in...
ANSI C 136.10-2006 is an American National Standard specifically formulated for locking-type photocontrol devices and their mating receptacles used in roadway and area lighting equipment. It...
The core of IEC 62504:2014 lies in its systematic compilation of precise definitions for LED-specific components and systems, addressing the terminology confusion caused by rapid technological...
IEC 60730-1:2010 defines general safety and performance requirements for automatic electrical controls used in or with household and similar equipment, encompassing energy sources like electricity, gas,...
UL 991:2000 is a critical safety standard from Underwriters Laboratories (UL) that outlines specific testing requirements for safety-related controls incorporating solid-state devices. Designed to address the...
IEC 60809:2023 is an international standard published by the International Electrotechnical Commission (IEC) that specifies dimensional, electrical, and luminous requirements for lamps used in road vehicles.
IEC 60601-1:2005 is a standard that specifies the general requirements for the basic safety and essential performance of medical electrical equipment. It applies to various types...
CISPR 14-1:2016 (EN 55014:2021) is an international standard focusing on electromagnetic emission requirements for household appliances, electric tools, and similar apparatus. It specifies limits for radio-frequency...
IEC 62041:2010 sets forth the electromagnetic compatibility (EMC) requirements for transformers, power supplies, reactors, and similar products. This standard covers a wide range of equipment, including...
IEC 60081:2013 is an international standard that specifies the performance requirements for double – capped fluorescent lamps used in general lighting service. It covers various types...
IEC 60969:2016 specifies the performance requirements for self-ballasted compact fluorescent lamps (CFLs) intended for general lighting applications. It covers essential characteristics such as luminous flux, efficacy,...
This standard, “CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules and its supplement”, focuses on setting out measurement methods for electrical,...
This part of IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general...
The report CIE 121:1996 sets out to provide specifications for the standard conditions under which photometric tests should be carried out and to recommend testing procedures...
The IEC 62052-11 standard specifies the general requirements, testing methodologies, and test conditions for electricity metering equipment used in alternating current (AC) systems. It covers essential...
The IEC 62612:2013 standard specifies performance requirements for self-ballasted LED lamps intended for general lighting services, operating at supply voltages greater than 50 V. I
This part of IEC 60998 applies to connecting devices as separate entities for the connection of two or more electrical copper conductors (complying with IEC 60228...
The purpose of IEC 62208: 2023 standard is to harmonize as far as practicable all rules and requirements of a general nature applicable to empty enclosures...
This standard EN 62717:2017 provides test methods related to parameters as prescribed by Commission Regulation (EC) 244/2009, Commission Regulation (EU) 1194/2012and Commission Regulation (EU) 874/2012 while...
This European Standard EN 13032-1: 2004 establishes general principles for the measurement of basic photometric data for lighting application purposes.
This Indian Standard IS 16107 (Part 2/Sec1) was adopted by the Bureau of Indian Standards, after the draft finalized by the Illumination Engineering and Luminaires Sectional...
This Indian Standard IS 16103 (Part 2) was adopted by the Bureau of Indian Standards, after the draft finalized by the Electric Lamps and Their Auxiliaries...
The purpose of this document IEC 60947-1:2020 is to harmonize as far as practicable all rules and requirements of a general nature applicable to low-voltage switchgear...
This standard specifies the technical requirements for number plate lighting devices designed for use in automobiles, ensuring that the number plate remains visible under various driving...
This standard specifies the general requirements for elevated type aerodrome lighting fittings used in airports. It covers the design, manufacturing, and testing requirements to ensure safety,...
This standard sets the energy efficiency, functionality, and labeling requirements for indirect and direct general light sources with a luminous flux between 60 lumens and 12,000...
SASO has set the enforcement date for compliance with SASO standard 2927 for street lighting (Part III) to be September 1, 2020. UL Lighting laboratories have...
CIBSE Lighting Guide LG2: Lighting for healthcare premises
BS EN 61747-6-2Liquid crystal display devices Part 6-2: Measuring methods for liquid crystal display modules — Reflective type need to use LISUN goniophotometer, integrating sphere and...
BS EN 12464-1Light and lighting. Lighting of work places Indoor work places need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
BS IEC 62679-3-3Electronic paper displays – Part 3-3: Optical measuring methods for displays with integrated lighting units need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
DIN EN 4731Aerospace series – Spectral quality of LED luminaires used with photoluminescent marking systems need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
SAE ARP798BDesign Criteria for White Incandescent Lighted Aerospace Instruments need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 60601-1-2Medical electrical equipment- Part 1-2: General requirements for basic safety and essential performance – Collateral Standard: Electromagnetic disturbances- Requirements and tests need to use LISUN...
IEC 60601-2-41Medical electrical equipment – Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis need to use...
SAE ARP582DLighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62341-6-1Organic light emitting diode (OLED) displays – Part 6-1: Measuring methods of optical and electro-optical parameters need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
ECE R.65UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SPECIAL WARNING LAMPS FOR MOTOR VEHICLES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 61988-2-1Plasma display panels- Part 2-1: Measuring methods-Optical and optoelectrical need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-1Display lighting unit – Part 2-1: Electro-optical measuring methods of LED backlight unit need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 61747-30-1Liquid crystal display devices- Part 30-1: Measuring methods for liquid crystal display modules – Transmissive type need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
ISO 8995 CIE S 008Lighting of Indoor Work Places need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62679-3-2Electronic paper display – Part 3-2: Measuring method-Electro-optical need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-3Display lighting unit- Part 2-3: Electro-optical measuring methods for LED frontlight unit need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-5Display lighting unit- Part 2-5: Measurement method for optical quantities of non-planar light sources need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
CIE 094-1993 Guide for floodlighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 088:2004 Guide for the lighting of road tunnels and underpasses, 2nd ed need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 194:2011 On Site Measurement of the Photometric Properties of Road and Tunnel Lighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 121-1996 The photometry and goniophotometry of luminaries need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 102-1993 CIE recommended file format for electronic transfer of luminaire photometric data need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
LEDs and Luminaire Test Solutions 
LM-79 and LM-80 Test Solutions 
LED Driver Test Solutions 
Household Appliances Test Solutions 
Mobile and Network Test Solutions 
Automotive Electronics Test Solutions 
Audio-Video and IT Test Solutions 
Cable and Wire Test Solutions 
Plugs and Sockets Test Solutions 
Power Switch Test Solutions 
Transformer Test Solutions 
Electric Toys Test Solutions 
Energy Meter Test Solutions 
Motor-Operated Tool Test Solutions 
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
