+8618117273997weixin
English
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語

IEC 61747-30-1 Liquid crystal display devices-Part 30-1: Measuring methods for liquid crystal display modules – Transmissivetype

Scope

This part of IEC 61747 is restricted to transmissive liquid crystal display-modules using either segment, passive or active matrix and achromatic or colour type LCDs. Furthermore, the transmissive modes of transflective LCD modules with backlights ON are comprised in this document. An LCD module in combination with a touch-panel or a front-light-unit is excluded from the scope because measurements are frequently inaccurate. Touch-panels or front-light-units are removed before measurement. Throughout the main body of this standard, an integrated backlight is assumed to provide the illumination for the measurements.

Deviations from this (e.g. segmented displays without integrated backlights) may usually be handled in the same way as display modules with integrated backlight, if an external backlight is provided. However, in the case where one of the two situations should be handled differently,this will be specifically stated.

Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)applies.

IEC 60050 (all parts), International Electrotechnical Vocabulary

IEC 61747-1, Liquid crystal and solid-state display devices – Part 1: Generic specification

IEC 61747-6-2, Liquid crystal display devices – Part 6-2: Measuring methods for liquid crystal display modules-Reflective type

ISO 9241-307, Ergonomics of human-system interaction – Part 307: Analysis and compliance test methods for electronic visual displays

ISO 11664-2 (CIE S 014-2/E: 2006), Colorimetry – Part 2: CIE Standard illuminants

LISUN following instruments fully meet IEC 61747-30-1 Liquid crystal display devices-Part 30-1: Measuring methods for liquid crystal display modules – Transmissivetype:

Leave a Message

Your email address will not be published. Required fields are marked *

=