Innovative products are supposed to perform in various weather conditions under extreme temperatures and humidity, high or low rates of climatic changes, as well as being exposed to stress in the course of many years. The issue is eradicated by means of an environmental test chamber through which the controlled laboratory solution will reproduce these conditions with repeatability and accuracy. At...
Proper measurement of undesired emissions is an essential need in the contemporary electronics. In compliance testing, the engineers are required to maintain emission within the limits required by legislations under standardized measuring conditions. An important constituent of this process is the electromagnetic test of interference, wherein the way of detection is indicated and evaluated in rega...
Effective assessment of corrosion is not only based on the length of exposure but the level of control of the test environment. A salt spray test is based on specifically controlled parameters to create the imitation of the aggressive corrosive environment, and even minor changes can distort an outcome. In an experimental corrosion test environment, calibration is used to assure that the temperatu...
Electronic equipment installed into real-world conditions is often vulnerable to transient overvoltage conditions due to lightning strikes, switching of power grids, interrupting inductive loads, and electrostatically couple with impractical ground. To ensure that the products will not fail and get away during such events, engineers use a surge wave generator that recreates standardized high-energ...
It is equally crucial to know the way light is scattered in space as it is that the luminaire produces a specific amount of light. In case of LED luminaires, optical behavior defines visual comfort, energy savings and lighting standard. The major instrument of measurement of this spatial light behavior is a goniophotometer. In the process of testing the professional IES, goniophotometer records fi...
Since the development of LED technology, recent lighting fixtures are generating a high level of luminous intensity, which in most cases are tens or even hundreds of thousands of lumens. Such strong sources of light need special photometric systems to measure accurately. Specifically, a large integrating sphere has been developed to deal with these high-lumen conditions with a stable and accurate ...
In real-life situations, the products are hardly subjected to constant temperatures. Rather, they are subject to unremitting fluctuation as caused by climate, operating load, and nearby systems. Reading a temperature chamber enables a professional to replicate these circumstances in a closed laboratory setup, permitting the organized testing of product conduct on a thermal force. Recent planning i...
Electrostatic discharge happens to be one of the most frequently acquired but poorly understood threats to the electronic equipment. The ESD test is conducted as per internationally accepted standards in order to test immunity against such incidences. Before thinking of the definition of test levels, it is necessary to explain what is ESD in the real world. Electrostatic discharge happens when the...
The choice of the appropriate measurement instrument is regarded as one of the most significant choices of any EMC laboratory. EMI test receiver is an integrated instrument in the assessment of undesired electromagnetic pollution that is produced by electronic products. In preliminary design validation up to formal compliance preparation, the quality and consistency of this measure has a direct ra...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語