LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
The IEC 62986:2017 standard specifies the technical requirements, design features, and test methods for plugs, socket-outlets, and couplers with arcuate contacts. These devices are intended for use in industrial and similar environments, focusing on reliability, safety, and mechanical durability under varying voltage and current conditions. The standard defines classifications, ratings, material requirements, and electrical performance criteria to meet the demanding needs of industrial applications.
LISUN supplies the fully test solutions for the following IEC 62986:2017, please see the below excel table:
| IEC 62986:2017 Plugs, socket-outlets and couplers with arcuate contacts | LISUN MODEL |
| Clause 8.3 Socket outlet with 75N force | SMT-1175 |
| Clause 9 Protection against electric shock | SMT-PB |
| Clause 10 Provisions for earthing | WB2678A |
| Clause 11.3.1 flexing test apparatus | JCY-2 |
| Clause 11.3.2 Pulling force | LNSYJ-1 |
| Clause 12 Resistance to ageing of rubber and thermoplastic material | GDJS-015B |
| Clause 17.3 humidity cabinet | |
| Clause 17 IP20 Degrees of protection | SC-015 |
| Clause 18 Insulation resistance and dielectric strength | WB2681A |
| Clause 21 Temperature rise | WS-1 |
| Clause 22.3 Pull test | LS-B47 |
| Clause 24.1 Torque test | |
| Clause 23.2 Impact test apparatus | IK07-10VT |
| Clause 23.7 flexing test(Figure 13) | SW-6 |
| Clause 25 Creepage distances, clearances and distances through sealing compound | CK-1 |
| Clause 26 Resistance to heat | ZBP-T |
| GW-500 | |
| Claue 27 Resistance to fire | ZRS-3H |
| Clause 28 Corrosion and resistance to rusting | YWX/Q-010 |
There are some standards focus on specifying technical requirements and test methods for different categories of lampholders in the lighting field, ensuring their safety, compatibility, and...
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN’s cable and wire test solutions meet IEC 60245-1, IEC 60227-1, IEC 60502-1 and IEC 60189 standards, covering electrical, mechanical, and safety tests for global compliance.
LISUN has all equipment according to the IEC60669 measurement, including environmental chamber, IP code waterproof dustproof test, switch lift test, etc.
LISUN’s plugs and sockets test solutions meet IEC 60884-1, IEC 60670-1, IEC 62613-1 standards, covering electrical, mechanical and safety tests for global compliance.
LISUN provide full test solutions for HID lamp, including integrating sphere system, goniophotometer system, EMI EMC chamber, HID ballast tester, electrical safety test, etc.
Lisun can supply full test solutions for fluorescent lamp, including integrating sphere system, goniophotometer system, EMI EMC test, electronic ballast tester, electrical safety test, etc.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s mobile and network test solutions include EMC/EMI testing, color glossiness measurement, IP waterproof/dustproof tests, IK impact tests, and environmental simulation, meeting international standards.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract Salt spray corrosion is a major environmental factor affecting the service life and reliability of metal, coating, electrical and electronic products. As the core equipment...
Abstract In the R&D, production and quality control of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts, dust testing equipment...
Abstract Salt testing equipment has emerged as an essential instrument for evaluating the corrosion resistance of metallic materials and protective coatings across diverse industrial applications. This...
Abstract: Sand and dust testing is a core method to verify the dustproof performance of enclosures for various industrial products, which directly determines the reliability and...
Abstract: Glow wire flammability index (GWFI) is a core indicator for evaluating the flame retardant performance of products and plastic components in electrical and electronic engineering,...
Abstract As core equipment for verifying the environmental adaptability and reliability of industrial products, the temperature and humidity environmental chamber can accurately reproduce the dynamic changes...
Abstract As the core testing equipment for simulating artificial salt spray corrosion environments, salt spray cabinet is a key tool for evaluating the corrosion resistance of...
Abstract In the R&D and quality inspection of products in LED lighting, electrical and electronic, and electronic component industries, environmental adaptability and reliability verification are core...
Abstract Glow wire apparatus testing has become a critical method for evaluating flame retardancy and fire safety of electrical and electronic products. This paper presents a...
Abstract Dust test chambers play a critical role in verifying the environmental reliability of electrical and electronic products by simulating real-world dust ingress conditions. This comprehensive...
Abstract: The salt spray corrosion test chamber is a core environmental simulation device for corrosion resistance testing of materials and products, playing an irreplaceable role in...
Abstract: Flame retardancy performance is a core safety indicator for electrical and electronic products, household appliances, lighting equipment and their plastic components. As a high-precision testing...
Abstract: Dust testing equipment is a core device for the detection of industrial products’ dustproof performance. It can simulate natural dust climatic conditions to conduct standardized...
Abstract: The sand and dust test chamber is a key device for simulating dust environments and conducting product dustproof performance testing. Relying on the coordination of...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
Abstract: Thermal chamber is a core instrument for verifying the environmental adaptability and reliability of industrial products, and plays a critical role in R&D and quality...
Abstract: As the core functional unit of the high and low temperature humidity alternating test chamber, the temperature humidity controlled chamber is the key to achieving...
Abstract: Salt spray test corrosion is a core method for evaluating the corrosion resistance of materials and products. As a key device for simulating salt spray...
Temperature and humidity are core environmental factors affecting the performance stability and structural reliability of industrial products. LED lamps, electronic components and various industrial materials have...
Abstract With the rapid development of electrical and electronic products, household appliances, lighting equipment and other industries, the flame retardancy of products and plastic components has...
Abstract: In electronic engineering and environmental reliability evaluation systems, the Ingress Protection (IP) rating is an internationally recognized standard for measuring products’ defense capabilities against solid...
Abstract Salt spray corrosion is one of the main environmental factors leading to the failure of metal materials and various industrial products. The global economic loss...
Abstract In the process of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are key factors...
Abstract In the system of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are core indicators...
Abstract How to do ball pressure test? The Ball Pressure Test is a core safety assessment procedure used to evaluate the thermal deformation resistance of non-metallic...
Humidity chamber is not a generic laboratory enclosure but it is a precision system that has a direct effect on the validity of reliability stability and...
The thermal test chamber is a fundamental tool of accelerated aging and analysis of the heat stress due to the fact that the heat is among...
The climate test chamber is used to simulate controlled climatic conditions such as temperature and humidity that the product undergoes during storage transportation and operation. Climate...
The use of high temperature test equipment is critical in whether materials would be able to survive and perform reliably under high thermal stress. Heat resistance...
A mini temperature chamber has proved to be a necessity in laboratories requiring accurate thermal regulation and is less costly in footprint and at the same...
A glow wire test apparatus is a vital tool that can be used to measure the fire hazard in electrical and electronic devices. It replicates the...
A humidity test chamber is one of the foundations of stability testing in which moisture-induced degradation is a believable risk. Water vapor undergoes interactions on its...
Environmental test program qualifies electronic components as a basic condition that they should be able to work under various operating and storing conditions. Electronics in modern...
A climatic chamber is a major equipment in checking whether components are viable and can perform well in the case of combined temperature and humidity pressure....
Environmental chamber lacks being just hot or cold. Qualification of current products involves concomitancy and simultaneous regulation of airflow temperature and humidity plus in certain cases...
A thermal chamber is a key laboratory equipment that is utilized to analyze the product behavior under temperature stress. Diminished time, duration of thermal exposure In...
Abstract Salt spray corrosion is one of the core factors leading to metal material failure and reduced product reliability in marine environments and industrial scenarios. Accurately...
Knowledge of the behavior of materials to repetitive temperature variations is vital in the design of durable products used in electronics, automobile, aerospace, and manufacturing industries....
Innovative products are supposed to perform in various weather conditions under extreme temperatures and humidity, high or low rates of climatic changes, as well as being...
In real-life situations, the products are hardly subjected to constant temperatures. Rather, they are subject to unremitting fluctuation as caused by climate, operating load, and nearby...
Outdoor and automotive designed products are constantly exposed to airborne particles that will undermine performance, safety and longevity. Enclosures may allow fine dust, sand and road...
The conditions in the modern automotive and aerospace systems are so harsh that they subject materials, electronic and mechanical assemblies to the supreme strain. Temperature variations,...
The glow wire test standard is the most broadly applied test to determine the ignition resistance of insulating materials, plastics and enclosure parts subjected to overheating...
Products that are to be used outdoors, in industrial, military or desert conditions must show good performance under the exposure of airborne particles. These deplorable conditions...
Thermal stress analysis is an important tool in establishing the behavior of materials, electronics, and mechanical assemblies at excessive temperatures. The temperature test chamber will be...
Safety inspection of electrical and electronic products in regard to fire safety is a prerequisite in the world-wide industries. As devices get smaller and denser and...
Devices that are electronic, industrial, car, battery-powered, and field-mounted often work in dusty environments. Small yet at first sight harmless, dust particles will eventually destroy insulation,...
Abstract Ground resistance testing is a fundamental and mandatory inspection for assessing the safety of electrical equipment and systems. A ground resistance tester evaluates the integrity...
The contemporary product production needs testing in the real environment, rather than laboratory testing on its own, when controlled. Materials, electronics, mechanical structures, and coatings as...
With the globalization of industries towards electrification, smart power distribution, automobile automation and electronics in consumer devices being smaller than ever, the demand has been put...
Environmental sealing is increasingly important in the manufacture of electrical, mechanical, automotive, and outdoor industrial products in order to be functional and safe. Since dust is...
Environmental testing is essential in engineering industries including the automotive, defence, electronics manufacturing, industrial equipment and medical equipment and aerospace industries as it assures durability and...
With the ever-increasing integration of electronics, composite materials and precision mechanical systems in modern products, there is an increased concern regarding reliability of these modern products...
Fire safety has been one of the factors that are very relevant in designing electrical and electronic products. The size of circuits is decreasing and heating...
The reliability and stability of the modern materials, electronics, and other consumer products is tested on the controlled environment in which temperature and humidity can be...
1. Introduction 1.1 Research Background and Significance In industrial production and practical applications, metal materials and various products are often exposed to the erosion of chlorine-containing...
Abstract This paper focuses on the LISUN GDJS-015B Temperature and Humidity Control Cabinet, systematically expounding its technical principles, core performance parameters and industrial application value. As...
Abstract This paper focuses on the LISUN ZRS-3H Glow-Wire Tester, a high-precision testing device developed by LISUN specifically for evaluating the flame-retardant properties of electrical and...
Abstract In the links of product R&D, production, and quality control, environmental reliability testing is a key means to verify the performance stability of products under...
Abstract In the field of industrial product reliability testing, salt spray corrosion testing is a key method for evaluating the corrosion resistance of materials and coatings,...
Abstract In industries such as electrical and electronic products, automobiles, and motorcycles, products are often exposed to the erosion of dust environments. Dust intrusion may lead...
Abstract In the fields of material research and development and product quality testing, the impact of climatic environments on performance is crucial. As a core testing...
Abstract Dust intrusion is a major threat to the reliability and service life of products in industries such as electronics, electrical engineering, and automotive manufacturing. The...
Abstract The flammability test for plastics is a fundamental assessment in material science and product safety, particularly for components used in electrical and electronic appliances. Among...
Abstract In environments where electronic and electrical products, automotive components, and lamps operate, dust accumulation and infiltration often lead to performance degradation, functional failures, or shortened...
Abstract Salt spray corrosion, as one of the most destructive forms of atmospheric corrosion, poses a severe threat to the durability and reliability of metal materials...
Abstract Glow wire flammability testing is a critical evaluation method for assessing the fire safety of polymeric materials used in lighting devices, electronic products, and household...
Abstract Humidity and temperature chamber, also known as environmental test chamber or thermal chamber, is a critical equipment designed to simulate various climatic conditions for evaluating...
Introduction Heating chambers, also known as environmental test chambers, are critical tools in reliability testing, widely employed to simulate extreme climatic conditions such as high temperature,...
Introduction In the operation and maintenance of modern electrical equipment, insulation resistance testing is a critical process for ensuring safety, reliability, and performance. This testing method...
Introduction Environmental chambers are sophisticated testing instruments designed to replicate extreme environmental conditions such as high temperatures, low temperatures, humidity, salt spray, and vibrations. These...
Introduction A salt fog chamber, commonly referred to as a salt spray test chamber, is a sophisticated piece of equipment designed to replicate the harsh, corrosive...
Introduction Low temperature testing is a cornerstone of environmental reliability testing, playing a pivotal role in industries such as electronics, automotive, aerospace, and materials science. This...
Introduction In modern industrial production and scientific research, high-low temperature and humidity alternating test chambers are critical environmental testing devices widely used in industries such as...
Introduction In modern industry and scientific research, environmental simulation equipment plays a crucial role. These devices can precisely control key parameters such as temperature and humidity,...
Introduction Corrosion testing plays a crucial role in quality assurance laboratories within the metal industry, especially when it comes to quality control testing. The LISUN YWX/Q-010...
Introduction In today’s rapidly evolving industrial landscape, ensuring the safety and reliability of materials under extreme conditions is more critical than ever. Among various testing methods,...
Abstract In industries where products are exposed to dusty environments, assessing their resilience to dust ingress is crucial. The LISUN SC-015 Dustproof Test Chamber offers a...
Abstract The insulation resistance tester plays a crucial role in ensuring the safety and efficiency of electrical equipment. The LISUN WB2681A, as an advanced insulation resistance...
In the modern world, ensuring the fire safety of electrical products and materials is of paramount importance. The quality and safety of electrical and electronic devices,...
Abstract The IEC 60695-10-2 standard, commonly referred to as the Ball Pressure Test Method, plays a pivotal role in evaluating the heat resistance of electrical components,...
Corrosion is one of the most significant challenges faced by materials exposed to harsh environments. Whether in industrial equipment, automotive parts, or consumer electronics, corrosion can...
Abstract This paper explores the importance of the ball press test for resistance to heat (also known as the ball pressure test) in ensuring the safety...
Abstract In the modern world, the safety of electrical and electronic products, as well as household appliances, has become a critical concern due to the potential...
Introduction Corrosion is a major issue affecting materials, particularly metals, across various industries. In order to understand the corrosion resistance of materials, accelerated testing methods such...
Abstract Temperature and humidity chambers play a critical role in evaluating the durability and performance of various materials and electronic components under different climatic conditions. This...
Introduction In the field of environmental testing, the thermal cycle test chamber plays a crucial role in ensuring the reliability of materials, components, and products under...
Abstract Flame retardancy testing is crucial for ensuring the safety of electrical and electronic products. The Glow Wire Test Procedure is a widely recognized method used...
Introduction Corrosion is one of the primary concerns in the durability and longevity of industrial and consumer products. To mitigate the effects of corrosion, rigorous testing...
Abstract: This paper focuses on the corrosion resistance testing method of metal deposits and chemical treatment layers of light industrial products based on the ASTM B117...
The IK Vertical Hammer Impact Tester plays a critical role in evaluating the durability and resilience of electrical and electronic equipment subjected to mechanical impacts, as...
Abstract This paper explores the application of the LISUN SC-015 Dustproof Testing Machine in assessing the physical and performance characteristics of electronic and electrical products, luminaires,...
Introduction Temperature and humidity testing plays a crucial role in assessing the durability and reliability of products in extreme environmental conditions. The LISUN GDJS-015B Temperature Humidity...
Abstract: This paper comprehensively investigates the detrimental effects of salt spray corrosion on various products and highlights the advantages of the LISUN YWX/Q-010 Salt Spray Test...
Introduction Corrosion is a critical challenge for many industries, particularly those working with metals and alloys. The salt spray test is one of the most widely...
Abstract Dust testers play a pivotal role in evaluating the resistance and durability of products exposed to dusty environments. These tests ensure that electronic components, lighting...
Introduction The climate test chamber is an advanced tool designed to simulate various climatic conditions, such as heat resistance, cold endurance, dryness resistance, and humidity tolerance....
Introduction In the world of material testing, one of the most critical assessments for understanding the durability of products in harsh environments is salt spray corrosion...
Flammability testing is a critical step in assessing the safety of materials used in electrical and electronic products. The glow wire test machine, such as the...
Corrosion is a persistent issue affecting the durability and performance of components, parts, electronic devices, metal materials, and industrial products. Salt Spray Test Chambers, such as...
Introduction In today’s increasingly demanding industrial landscape, testing the durability and performance of products under various climatic conditions is critical to ensuring product reliability and long-term...
Abstract Insulation resistance testing plays a crucial role in determining the safety and operational efficiency of electrical equipment. An essential tool for this process is the...
Abstract This paper focuses on the ZRS Glow Wire Tester, specifically the LISUN ZRS-3H Glow-wire Test Apparatus, analyzing its application in flame retardant testing within quality...
Abstract The Ball Pressure Test for IEC 60695-10-2 is essential for evaluating heat resistance in electrical products, specifically focusing on components such as plugs and sockets...
Abstract The salt spray corrosion test, an accelerated corrosion testing method, is extensively used to assess the corrosion resistance of various materials and coatings. This study...
Introduction The importance of environmental testing has grown exponentially as industries seek to ensure the durability and reliability of their products. One of the most commonly...
Introduction The salt spray machine plays a critical role in the evaluation of material resistance to corrosion, particularly in industrial applications. One of the industry-standard tools...
Introduction The dustproof rating test is an essential aspect of evaluating electronic devices, enclosures, and other industrial equipment that are exposed to harsh environments. Understanding how...
In various industries, understanding the durability and resistance of materials to corrosive environments is essential. One common method to evaluate this is the salt contamination test,...
Introduction ASTM B117 salt spray testing is one of the most widely used methods for assessing the corrosion resistance of materials and coatings. It simulates harsh...
Salt spray testing is a crucial method for evaluating the corrosion resistance of materials and coatings. This paper explores the fundamental principles of salt spray tests,...
Abstract This article examines the role of dust chambers in testing products under simulated dusty climatic conditions. Dust chambers are essential for assessing the physical and...
Abstract This article explores the use of humidity test chambers to evaluate product performance under varying climatic conditions. Emphasizing the importance of meeting industry standards, such...
The High and Low Temperature Humidity Chamber is an essential tool used in various industries to simulate environmental conditions, including temperature fluctuations and humidity levels. This...
Environmental testing is critical in understanding how various products respond to changing climatic conditions. This paper discusses the role of thermal shock chamber, specifically the LISUN...
Abstract Humidity chambers, particularly the LISUN GDJS-015B Temperature Humidity Chamber, play a crucial role in simulating and testing the resilience of various materials and components to...
Abstract The salt mist test, a critical assessment method for evaluating the corrosion resistance of materials, plays a vital role in ensuring the durability and reliability...
Electrical safety is paramount in the design and manufacturing of modern electronic devices. To prevent fire hazards and ensure product reliability, manufacturers must conduct rigorous testing...
In our daily lives, electronic and electrical products generally come with certain levels of dust and water resistance. These protective capabilities are crucial for safeguarding products...
As a key component in the automotive power system, the performance of the drive solenoid valve directly affects the power output, fuel efficiency, and overall operational...
In today’s automotive manufacturing industry, quality inspection is a critical step to ensure the quality and performance of products. As automotive technology advances and consumer demands...
Overview The salt spray test chamber is primarily used for conducting corrosion tests to ensure the quality of ferrous metals and their coatings. This test is...
Overview Ball Pressure Test (Resistance to Heat) is a critical experiment for evaluating the heat resistance performance of insulation materials, primarily used to support and protect...
The Impact of Salt Spray on Electronic Products and Mitigation Measures Salt spray is widely present in marine, atmospheric, terrestrial, lake, and river environments, inevitably exposing...
Salt Spray Test Chamber: Testing Standards Salt spray test is an environmental test that evaluates the corrosion resistance of products or metal materials by simulating a...
Overview Glow Wire Testing is a crucial method for evaluating the stability of electronic appliances during operation. By simulating high-temperature conditions resulting from electrical faults, this...
Dust penetration into products can have significant impacts on their performance and durability: • Breaching Seals and Casings:Dust can infiltrate internal spaces through seals and casings,...
Environmental testing refers to exposing products or materials to specific conditions, either natural or artificial, to evaluate their performance under realistic storage, transportation, and usage scenarios....
The high and low temperature test chamber is an essential device for conducting reliability tests on industrial products. It simulates high and low temperature environments to...
What is Ground Resistance? Ground resistance refers to the resistance encountered by current flowing from the grounding device into the earth and then dispersing to another...
Corrosion testing is widely employed in quality assurance laboratories within the metal industry as a critical step in quality control testing. These tests are typically conducted...
In-depth Analysis of Pressure Testing Methods and Standardization Guidelines Operation Steps and Methods of Ball Pressure Testing: 1. Sample Pressure Treatment: Place the sample under the...
In-Depth Analysis of Ball Pressure Test Apparatus and Standardization Guidelines of Ball Pressure Test Ball Pressure Test Procedure and Methods: • Sample Pressure Treatment: Place the...
What application of Glow wire tester? Glow wire tester is a widely used method for assessing the flammability of plastic sheets or components. This testing procedure...
Temperature Humidity Chamber introduction: Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
What is An Insulation Resistance Tester? Insulation resistance tester is an important technical tool to measure the protective capacity of electrical systems. It evaluates the electrical...
What is A Ball Pressure Test Ball Pressure Test is a safety regulation test to examine the heat-resistance performance of product materials. The temperature of the...
With the continuous development of technology, various electronic devices are becoming more and more widely used in our lives. Electronic devices usually need to be tested...
Hot wire testing is a common method used to evaluate the flammability of materials. The Glow-wire Test Apparatus is the main tool used for this type...
The glow-wire tester is used to simulate the ignition of insulation materials or other combustible components inside equipment that may catch fire due to a hot...
Dustproof test chamber is also known as IPX6 dustproof test chamber. With the rapid development of modern technology, electronic products are being widely used in our...
The constant temperature humidity chamber will cause different levels of damage to the machine and equipment after long-term temperature running-in. Therefore, the following points are common...
The scientific name of the sand dust test chamber is Dustproof chamber, and Dustproof Testing Machine. It is used for IP dust testing of products. Its...
Introduction: In a number of different sectors, the capacity to simulate harsh weather conditions in order to test the performance and durability of items is essential....
Introduction: Temperature control is a crucial component of the manufacturing process for pharmaceutical products. This component helps ensure the quality, safety, and efficacy of the final...
Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected by...
Introduction Environmental stress screening (ESS) is performed to determine the durability and dependability of electronic components and goods, and temperature and humidity chambers play a critical...
In normal applications, manufacturers of high and low temperature test chambershould pay attention to maintenance and upkeep after conducting experiments, which can increase the service life...
The high and low temperature humidity test chamber, also known as the temperature shock test chamber and the thermal cycle chamber, is a device used to...
With the continuous development of technology, various electronic devices are becoming more and more widely used in our lives. Electronic devices usually need to be tested...
In order to achieve reproducibility, temperature tests must be designed in such a way that the highest or lowest temperature reached at a certain point in...
With the popularity of smart devices and increasing demands for waterproof and dustproof features in devices like smartphones and watches, waterproof and dustproof technologies have received...
The sand and dust test chamber is suitable for the antifouling test of parts and materials such as welders, electronic equipment, electrical products, automobile lights, motorcycles,...
When it comes to the performance and reliability of components and systems, the aerospace sector is among the most demanding and crucial. Aerospace equipment must undergo...
Introduction: Solar panels are essential for capturing solar energy, which has quickly become an important renewable energy source. The need of rigorously testing the performance of...
Today’s digital era relies heavily on data centers to house and handle massive volumes of data. Energy usage and heat control are two major issues that...
Introduction As the globe moves toward cleaner and more sustainable methods of electricity production, the renewable energy industry is seeing enormous development and innovation. The development...
Introduction Environmental chambers reliability testing relies heavily on temperature cycling. Temperature cycling is a method of testing a product’s or component’s resilience and performance in severe...
Introduction: The ability to control heat is essential in the creation of any electrical equipment. Effective heat dissipation solutions are crucial to maintain maximum performance, reliability,...
Introduction Humidity’s effect on material deterioration may be measured in environmental chambers. The purpose of humidity testing is to evaluate a product’s performance and durability in...
Introductio Electronics play a crucial role in modern society because of how pervasive technology has become. Every electronic gadget, from cellphones to car systems, is built...
Introduction The Glow Wire Test is a standard procedure for determining the combustibility of electrical insulation. It’s vital to the security and dependability of electrical and...
Introduction: Products need to be well-packaged so that they don’t get damaged or spoiled while being stored, transported, or distributed. It is crucial that items get...
Introduction Environmental elements such as temperature and humidity may have a major impact on how well and how long something lasts. The aerospace, automotive, construction, and...
Introduction Electronic components are often put through their paces in today’s fast-paced technological world, where they are exposed to a wide range of environmental conditions that...
Introduction It is of the utmost importance to ensure that the batteries in electric vehicles are both reliable and secure as the number of individuals who...
Introduction The corrosive effects of salt spray on building materials in coastal areas may have a major influence on their longevity and function. Extensive testing is...
Introduction The powers of diagnosis, treatment, and monitoring have all been significantly improved because of technological advances in medicine. Before they can be utilized in a...
Introduction The food and beverage business works in an environment that is highly regulated, and the emphasis is always placed on the quality and safety of...
Introduction More and more research and development are going into improved insulation materials in an effort to make buildings more energy efficient and environmentally friendly. A...
When assessing the effectiveness of insulating materials, thermal conductivity is a key feature to take into account. Applications ranging from thermal insulation to electronics depend on...
Introduction Corrosion is a common problem that arises in many different industries because it shortens the lifespan of products, structures, and materials. Through meticulous testing and...
Introduction The performance, dependability, and longevity of automotive components and systems may be evaluated under severe temperature settings, making thermal chambers an essential tool for automotive...
Introduction Industries as diverse as electronics, automobiles, airplanes, and telecommunications all rely on rapid temperature change testing. It entails putting items and parts through rapid temperature...
Introduction To guarantee their safe and dependable performance under harsh environments, aircraft components and systems must undergo extensive testing and validation within the aerospace industry. Aerospace...
In addition to components such as compressors, pressure accumulators, condensers, and dryers, the refrigeration system of the high and low temperature test chamber also has several...
IEC ball pressure test is a special kind of Potting test, which is used to test the insulation resistance and shell protection insulation strength of the...
Introduction Automotive, aerospace, construction, and maritime sectors all face major corrosion challenges. Manufacturers use coatings and metals with high corrosion resistance to counteract corrosion’s destructive effects....
Introduction Humidity and temperature chambers are crucial for product testing and development in many fields. The performance, dependability, and longevity of items may be evaluated in...
Introduction Testing materials and coatings with salt spray is a common and accepted way to gauge their resistance to corrosion. Various organizations have set particular criteria...
Introduction Electronic device R&D and testing rely heavily on temperature and humidity chambers. Electronic devices must prove their dependability, performance, and durability across a wide range...
Dust test box is a kind of equipment used for product dust prevention now. Now some products require strict use environment, so dust test box will...
What are the standards for high and low temperature chamber? High and low temperature chamber are used to test various raw materials, such as electronics, electrical products,...
Introduction Testing and developing batteries, which are vital power sources in many sectors including automotive, electronics, renewable energy, and aerospace, need temperature and humidity chambers. Demand...
The sand and dust test chamber is an instrument that can accurately detect the sealing and anti wind sand performance of outdoor equipment, transportation, electronic communication...
The two main functions of a high and low temperature chambers are refrigeration and heating. During the heating and cooling process, accurate, efficient, and uniform heating...
I. Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected...
Introduction Because they allow for precise and repeatable testing of components and systems under harsh climatic conditions, temperature and humidity chambers play an essential role in...
The temperature and humidity of a high and low temperature test chamber exist in two situations: alternating test chamber and constant test chamber. The control method...
Introduction Pharmaceutical research and development greatly benefits from the use of temperature and humidity chambers for the purpose of testing and evaluating medication products, formulations, and...
Introduction Medical device testing and validation rely heavily on temperature and humidity chambers. Safety, dependability, and efficacy of medical equipment are of paramount importance; hence the...
The Salt Corrosion Test is a method that uses a test device called a “Salt Spray Corrosion Test Chamber” with a certain volume space to assess...
The sand dust test chamber is an instrument that can accurately detect the sealing and anti wind sand performance of outdoor equipment, transportation, electronic communication and...
Introduction To ensure the safety, quality, and shelf life of its goods, the food and beverage sector relies heavily on temperature humidity chambers for extensive testing....
Scope of application Suitable for performance reliability tests for industrial products. This Temperature Humidity Chamber has a large temperature control range, and its performance indicators meet...
Dust testing equipment is a device used to test the dustproof rating of electronic devices and products. IP6X is a standard set by the International Electrotechnical...
A salt spray test chamber is used to assess the corrosion resistance of the tested samples by subjecting them to salt spray corrosion. Salt spray refers...
Introduction The performance and longevity of packing materials may be evaluated with the use of temperature and humidity chambers, which are multipurpose testing tools. The quality...
Testing Flammability with Glow Wire Test Apparatus and Needle Flame Apparatus is used to determine if a substance can be ignited and pose a risk of...
I. Introduction of Salt Spray Test Corrosion testing is widely adopted and used for quality control testing in the metal business quality assurance laboratories. The mentioned...
Programmable high low temperature chamber, also known as thermal test chamber, have been widely used in many industries to test the physical properties and endurance of...
The official name of the dust test chamber is IP6X dust test chamber, IP5X dust test chamber, and various other names. It is an instrument used...
High and low temperature chambers are a common testing equipment widely used in industries, research institutions, aerospace and other fields. By simulating extreme weather environments more...
The sand and dust test chamber can also be called a dustproof testing machine, dust proof chamber, etc. It is used to test the physical and...
Introduction The automobile sector has a tremendous issue from corrosion, which reduces vehicle longevity, efficiency, and safety. Corrosion testing is an essential part of ensuring the...
The sand and dust test chamber is used to test the protective performance of the test piece by simulating a windy sand environment. To simulate the...
When selecting high and low temperature humidity and heat test chamber, we should make rational selection according to our own needs, and at the same time,...
What is Salt Fog and Salt Spray Testing? Salt Fog and Salt Spray Testing is a kind of environmental test, mainly used to evaluate the corrosion...
Introduction When conducting tests and experiments on materials, goods, and electronic components in a controlled environment, temperature and humidity chambers are indispensable instruments. Regular calibration of...
I. The purpose of the dust test chamber The dustproof test chamber, also known as dustproof grade test equipment, is suitable for the dustproof test of...
High temperature chamber is mainly used for high-temperature experiments in industrial and mining enterprises, laboratories, scientific research institutions, etc. It has the functions of drying and...
Temperature and Humidity Chamber is used to test the material structure and composite material, can withstand the range in the continuous environment of extreme low temperature or...
The Sand Dust Test Box is designed for assessment of two levels of protection standard specified by the enclosure protection standard, which is mainly used to...
Introduction Electronic components are the backbone of contemporary technology, and many different fields depend on their dependability and efficiency. Electronic components are sensitive to temperature and...
Introduction By replicating real-world fire events and assessing the combustibility of various materials, the Glow Wire Test equipment is an indispensable tool for detecting potential fire...
Dust test box is a kind of equipment used for product dust prevention now. Now some products require strict use environment, so dust test box will...
The constant temperature humidity chamber is composed of six systems: control, humidity, refrigeration, heating, air circulation, and sensors. The working principles of these systems are: 1....
Introduction Manufacturing, construction, aerospace, and automotive are just a few of the sectors that rely heavily on material testing. The capacity of materials to survive various...
Introduction The Glow Wire Test device is an essential piece of equipment for conducting fire safety tests on a wide range of materials. The capabilities and...
I. Working Principle of Each Component of High and Low Temperature Constant Temperature Chamber The cooling system of high and low temperature test box is one...
Introduction Product development and quality assurance in many sectors cannot proceed without extensive environmental testing. Manufacturers may test the performance, durability, and resistance to deterioration of...
In the production process of electronic devices, there is always a crucial step, and using a high and low temperature chamber to test product quality has...
I. Dustproof Chamber introduction The Dustproof Chamber is suitable for dust and dust-proof testing of various automotive parts, testing parts including headlights, instruments, electrical dust-proof sleeves,...
Introduction To reach a sustainable and low-carbon future, renewable energy technologies like solar and wind power are essential. Thorough testing and assessment are required to guarantee...
The scientific name of dustproof test chamber is sand and dust test chamber, which is widely used, including but not limited to the protection level test...
Introduction A crucial part of fire risk assessment is glow wire testing, which is a useful method for analyzing the fire behavior and safety capabilities of...
Salt spray testing machine is a kind of testing device used to simulate corrosive environment containing salt gas, to evaluate the anti-corrosion performance of different materials,...
High and low temperature humidity test chamber is a scientific experiment equipment for simulating various environmental conditions. It can simulate temperature and humidity conditions in real...
I. Definition of Glow Wire Test The Glow Wire Tester is used to test the stability of electronic appliances when working. The hot thread itself is...
Why is the constant temperature humidity chamber blocked? 1. During the test, the door was opened, and there was icing in the working room. 2. The...
Dustproof Test Chamber is a specialized instrument used to assess and measure a device or equipment’s ability to withstand penetration, abrasion, or obstruction by dust particles....
Introduction To make sure that textiles and clothing last and are comfortable to wear and functional, the fast-paced textile and apparel sector must use rigorous quality...
Because the high and low temperature chambers are used to test the relevant characteristics of goods, do not install them casually. If it is installed casually,...
The sand and dust test chamber, also known as the dustproof test chamber, is used to test the IP dust level of the product shell under...
High and Low temperature humidity chamber plays an active role in the fields of aviation, automotive, home appliances, raw materials, components, scientific research, etc. It can...
Introduction The Glow Wire Test is an essential tool for gauging the safety of electrical and electronic components in the event of a fire. This test...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
Introduction When it comes to selling products, dependability is essential. The value of dependable products cannot be overstated in the industrial sector. The performance and lifespan...
The glow wire test apparatus simulates that parts of insulation materials or other solid combustible materials that are prone to flame propagation inside the equipment may...
Glow wire testing can be used to assess fire protection in electrical equipment. It is intended to simulate what an over-heated component may cause a fire...
The high and low temperature chamber is also known as environmental test chamber is a common testing equipment that simulates extreme weather environments more realistically through...
Introduction Temperature and humidity chambers are an essential component in many companies’ efforts to reproduce and analyze the effects of temperature and humidity on a diverse...
The high temperature test chamber is also known as the environmental testing equipment, is used to put the product into the test chamber, set the high...
The sand and dust chamber, is applicable to the antifouling test of parts and materials such as welders, electronic equipment, electrical products, Automotive lighting, motorcycles, chemical...
The scientific name of the dust sand test equipment is the sand and dust test chamber, which tests whether the product meets the IP protection level...
What is a Glow Wire Test? The glow wire test is to test the stability of electronic and electrical products when they are working. The glow...
Dustproof testing machine can also be called sand and dustproof test chamber, sand and dust test chamber and other names. It uses the medium talcum powder...
I.The principle of high and low temperature test chamber alternating wet and heat test box: Under high and low temperature test chamber, due to the steam...
I. Overview of Temperature and Humidity Measurement Method of High and Low Temperature Humidity Chamber： Electric and electronic products are almost used in various climatic conditions...
Introduction Making sure products last as long as possible is essential to manufacturing’s customer happiness and reputation. Significant difficulties arise due to dust infiltration, which may...
Introduction The Glow Wire Test is a standard for measuring the fire safety of electrical and electronic devices. The Glow Wire Test is one example of...
Introduction Customer happiness, loyalty to a brand, and bottom-line earnings are all impacted by a product’s durability in the manufacturing sector. Dust is a frequent environmental...
The dustproof test chamber is a device that uses artificial simulation systems to test products using talcum dust as the medium. It is widely used in...
What is Glow Wire Testing? Glow Wire Testing is used to test the stabilities of electronic and electrical products when in operation. The glow wire itself...
1. Briefly Interpretation of Cyclic Corrosion Test The cyclic corrosion test method is a newly developed method which can reflect the influence of natural environment exposure...
Introduction When it comes to HVAC (Heating, Ventilation, and Air Conditioning) systems, temperature and humidity chambers are essential for development and testing. Manufacturers and researchers may...
The working principle of the salt spray chamber: Corrosion is the damage or deterioration caused by the action of the environment on a material or its...
Introduction The Glow Wire Test apparatus is a flexible instrument for testing the fire safety of a wide range of electrical and electronic items. It has...
High and low temperature chambers are a type of environmental test chamber and widely used in various tests. It contains many kinds of products and is...
Introduction For the sake of the company’s reputation and the satisfaction of its clientele, manufacturers are tasked with ensuring that their wares continuously provide the desired...
Salt is a ubiquitous compound, which not only exists in the ocean, atmosphere, land surface, lakes and rivers, but also causes machinery or electronic products to...
Sand and dust testing, also known as sand and dust resistance test, is a destructive testing equipment that simulates the natural wind and sand climate on...
The scientific name of dustproof test chamber is sand and dust test chamber, dustproof test machine, and other various names, which is used for the product...
Introduction The testing of new building materials often requires exposure to a range of temperatures and humidity levels. The performance, durability, and adaptability of building materials...
1. Introduction Electronic products encompass a wide range of products from lighting products, electronic components, mobile communication terminals and more, all including protection requirements such as...
Salt spray test chamber is also called salt spray testing machine, which is called salt spray testing machine in full, and is mainly used to test...
Introduction The corrosion resistance of materials and coatings may be evaluated using a variety of methods, two of the most common of which being salt spray...
Introduction When it comes to ensuring the reliability and safety of electrical and electronic products, certifications and compliance play a critical role in meeting applicable standards....
The Temperature Humidity Chamber is a kind of humidity testing equipment , used to test the range of material structure and composite materials that can be...
High and low temperature chambers are widely used in various industries such as electronics, electronics, aviation, chemical, military, etc. However, the testing requirements for products in...
Introduction In the lightning-fast world of electronic device manufacturing, constant attention must be devoted to the reliability and longevity of the products being manufactured. Although it...
High Low Temperature Testing Test Chamber Intermittent Wet and Hot Test Box is a special sealed test box. The correct use of the device can not...
Introduction In the automobile sector, where the dependability and performance of cars and their components are of the highest significance, temperature humidity chambers play a key...
The Glow-wire Tester is used to test the stability of electronic and electrical products during operation, and the flame retardant performance of electronic products in the...
The sand dust testing mainly simulates the wind and sand weather in the natural environment, and then conducts the test, mainly testing the wind resistance and...
Electronic products mainly include lighting products, electronic components, mobile communication terminals, and have clear requirements for external shell protection tests, such as mechanical protection, waterproof, explosion-proof,...
Introduction Testing and developing electrical products is impossible without environmental chambers. Electronic equipment is tested in specialized chambers that can reproduce a wide range of environmental...
Introduction It is essential to have dust proof test chambers to evaluate how effectively and for how long certain goods can tolerate exposure to dust. Manufacturers...
Introduction The Glow Wire Test gadget is a cutting-edge piece of apparatus that is used in the process of determining whether electrical and electronic products are...
Introduction The dependability and longevity of many items, particularly those used in dusty or particulate-laden environments, depend on the results of dust ingress testing. Electronic components,...
The application field of Temperature Humidity Chamber is very wide, so the established good market demand has great development space in the environmental test equipment industry....
Introduction: The protection offered by electrical and electronic goods is of the highest significance. In order to provide assurance that the objects are resistant to fire,...
Introduction The reliability and durability of the items that customers buy has a direct bearing on the level of satisfaction and commitment they feel toward a...
To simulate a range of environmental conditions, including those involving temperature and humidity, temperature humidity chambers are a subset of environmental chambers used for testing and...
Precautions for procurement of sand and dust test chamber: 1. Select the required equipment test Different users have different requirements for product testing. Some users only...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
For now, there are more and more places where we use LED lights in our lives. LED is a light-emitting diode semiconductor device. Its working principle...
The test principle of the high and low temperature chamber has the tendency to simulate and simulate the temperature change in the natural environment. It is...
The scientific name of the dust proof chamber is sand-dust test machine, dust-resistant test machine, waterproof test chamber and other different names. It is used for...
The sand dust chamber is a device that uses artificial simulation systems to simulate the impact of natural dust environment, wind and sand, and to test...
The scientific name of sand and dust test chamber is dustproof test chamber, which is implemented according to international national standard parameters such as GB4208-2017 Enclosure...
The high and low temperature test chamber is suitable for environmental simulation reliability tests such as high and low temperature constant and gradual changes, damp heat...
Precautions when purchasing the high and low temperature test chamber: 1. Before understanding the high and low temperature chamber, we should first understand the needs of...
1. Cleaning and maintenance inside and outside the Temperature Humidity Chamber ①. Before the high and low temperature test, the internal impurities must be removed. ②....
The WS Series Temperature Rise Tester fully complies with the requirements of IEC 60884-1 Clause 19 (GB/T 2099.1 Clause 19); IEC 60669-1 Clause 17 (GB 16915.1...
The High and Low Temperature Humidity Chamber is a kind of testing mechanical instrument used to test the extent of endurance of material structure and composite...
In fact, one of the factors affecting the test results of the high and low temperature chamber is the sealing of the equipment. It can be...
Dustproof chamber can also be called sand dust chamber , sand dust test chamber, dust test chamber, etc. It is used to test the physical and...
If the high and low temperature humidity chamber uses ordinary water humidification particles, it will be relatively large. The humidity sensors of the equipment are more...
The core component of the compressor in the refrigeration system is the core component of the high and low temperature chamber, which plays a decisive role...
Dust proof test equipment can also be called sand dust test box and dust resistance test instrument. It is used to test the dust level of...
When the high and low temperature chamber is in the low temperature state, different test materials will have different physical shrinkage phenomena, which may make the...
What are the types of dustproof test chamber and their meanings The dustproof test chamber is divided into 1-6 categories, including IP1X dust test ball, IP2X...
The dustproof testing machine is also called sand dust test chamber, dustproof test chamber and other different names. It is used to detect the IP dust-proof...
High and low temperature & humidity test chamber is a common test equipment that simulates the heat dissipation performance, stability performance, power consumption parameters, and estimated...
All electronic products need to consider fire risk and potential fire hazards when designing. The design of components, circuits, products, and materials of materials need to...
To evaluate a product’s shell sealing ability by the International Protocol for the Testing of Shells, the “Dustproof test chamber” is utilized to mimic the detrimental...
Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the...
SC-015 Dust-proof Test Chamber (Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles...
The scientific name of the sand dust test chamber is known as sand dust tester, dustproof testing machine, dustproof test chamber and other different names. It...
There are 1-6 categories of dustproof test chambers, and three types of equipment with different appearances are walk-in sand and dust chamber, double door dust chamber...
Products that have been painted, electroplated, covered with an inorganic or organic layer, handled an anode, treated with anti-rust oil, etc., may be put through their...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
The use of environmental test chambers is very important for the accurate assessment of environmental stress cracking (ESC) in polymers. Environmental stress cracking, also known as...
To detect current leakage and poor or damaged insulation that may cause arc faults, blown circuits, and danger of electrical shock or fire, an insulation resistance...
Thermal testing is carried out in a thermal chamber, also known as an environmental test chamber. The testing is carried out using convection. The main purpose...
A salt spray chamber is a useful piece of machinery to evaluate how well a substance or coating holds up against corrosion. The instrument is often...
Dust proof chamber is also known as sand dust test chamber, dust resistance tester, sand dust test chamber and other different names. It tests the physical...
To ensure their goods can withstand even the most extreme circumstances, manufacturers often use a humidity chamber, a special device that simulates a variety of humid...
The glow wire test apparatus investigates the fire-resistant properties of raw materials and finished components. LISUN’s glow wire test equipment has been ergonomically designed to meet...
The glow wire test is a physical experiment. The purpose is to test the stability of electronic and electrical products at work. The glow-wire tester heats...
I、 Purpose of environmental test The environmental test examines the adaptability of the product to the environment, determines whether the environmental adaptability design of the product...
The salt spray test standard specifies the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value, and also puts forward...
Needle flame test and glow wire test test description Needle flame test and glow wire test are both tests used in the electrical and electronic product...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber, Environmental test chambers are according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
I. Salt spray test chamber| Salt spray testing simulates a corrosive salty environment in the laboratory. It is used to speed the testing of surface coatings’...
As a type of reliability test equipment, environmental test has developed into a method to predict how the product use environment affects the performance and function....
A humidity chamber often referred to as a temperature and humidity chamber , is appropriate for testing products like electrical equipment, home appliances, food, trolleys, vulcanized...
The high and low temperature test chamber is a common test equipment for simulating the heat dissipation performance, stability performance, power consumption parameters and estimating the...
Salt spray test is a clear and specific regulation of salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value. In...
What is an Environmental Chamber? An Environmental Chamber, also known as a climate chamber or a climatic chamber, is an efficient method to test how sensor...
Environmental Chamber (GDJS-015B) LISUN’s climate testing chamber or environmental chamber is a sealed space where the temperature and humidity may be adjusted as needed. This device’s...
The salt spray corrosion test chamber measures the product’s resistance to salt spray corrosion as well as the material’s and its protective layer’s salt spray corrosion...
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
A salt spray test or salt fog test is a corrosion method for checking the corrosion resistance of the materials and coatings of the surface. The...
Environmental test equipment is the general name of all test chambers simulating natural climate environment. Representative products include salt spray test chamber, high and low temperature...
Dust chambers are a particularly effective tool for this since they may test a product or component’s ability to resist dust. Dust test chambers offer a...
Environmental test chamber is a necessary equipment for enterprises engaged in the production of electronic products. It can test and test electronic products and is an...
How Does Test Chambers Work? Different systems are used in test chambers to create and maintain the ambient conditions depending on their intended use. Since they...
The enclosure protection is divided into two parts. The first part is to prevent access to dangerous parts and solid relics, and the second part is...
The test to evaluate and analyze the reliability of electronic products is called reliability test Reliability test is an activity to evaluate the functional reliability of...
What Does Salt Spray Testing Mean? An accelerated corrosion test called the salt spray test is used to compare the corrosion resistance of materials that have...
What is Climate Chamber? Climate chambers is used to simulate a temperature enviromental condistions, it may also be called environmental chamber or Thermal Chamber or Temperature Chamber....
What is an Environmental Test Chamber? LISUN has been building the most recognizable environmental testing equipment in the industry. Every chamber sold is highly recommended in...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
There are multiple methods for the evaluation of flammability and fire resistance of the material. They are usually direct flame and indirect flame methods. ”Direct Flame...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
What is a Dust Test Chamber? A dust chamber is intended for performing different types of tests where the temperature of the sample environment must be...
There is no doubt that safety is a paramount concern in any industry. That’s why at LISUN, we focus on ensuring the highest level of safety...
LED lighting products are rapidly replacing traditional lighting products due to their superior luminous performance and high efficiency and energy saving. With people’s continuous pursuit of...
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < basic testing methods of Glow wire, basic testing...
LISUN’s Salt spray test chamber The Salt spray test Chamber is used to conduct salt spray corrosive tests on components, parts, electronic and electrical components, metal...
Environmental Chamber An Environmental Chamber is defined as an enclosed space where environmental conditions such as temperature and humidity can be controlled. Some chambers are also...
What is a Salt Spray Test? The salt spray test is a generalized test method used to check the coated samples’ corrosion resistance. During the salt...
What Instrument can be used for testing impact of environment on different products? The Salt Spray Test Chamber is a piece of environmental testing equipment that...
What is an Environmental Chamber? An environmental chamber, also known as the climatic chamber or environmental test chamber, is an enclosed space for testing the effects...
What is the function of Environmental Chambers? Temperature, humidity, air pressure, light, and motion can affect the performance of a product. The environmental chamber can be...
IEC Certified Dust Test Chambers Are Correct Dust Testers Introduction Dust is intrusive contamination that can influence electronics and some other forms of equipment or machinery...
What is a ball pressure test? Under the action of high temperature, the structural properties of non-metallic materials and insulating materials will change greatly, and this...
What is the glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for providing resistance to abnormal heat and fire tests on the lighting lamps,...
Security is critical in the home appliance business. The purpose of fire safety rules is to assess and rate the flammability of materials used in appliance...
Introduction An environmental chamber, also known as a climate test chamber, is an enclosed area in which the temperature and humidity conditions can be modified as...
Salt Spray Test Chamber Introduction The Salt Spray Test Chamber applies to the salt spray corrosion test to protect layers of the components, parts, electronic and...
Technology is improving with growing demands. New equipment is introduced in the market to fulfil these changing needs. One such instrument is the Environmental Chamber. It...
Dustproof Test Chamber is defined as a chamber through which the gases pass to allow them to deposit the solid particles. It is the name of...
There are a number of corrosion tests that may be used to determine the long-term durability of protective coatings. However, the focus of this article is...
As more and more household appliances enter our daily life, and people use these electrical products more frequently, this requires that in addition to the design...
Salt spray test chambers is that your fasteners are put in, you rely on their endurance and want them to remain serviceable at all times. When...
What is the LED test standard？ Semiconductor light-emitting diode (LED) is a new type of light-emitting body, with high electro-optical efficiency, small size, long life, low...
In addition to producing a negative influence on the sensitive electronics that underlie the guidance and communications systems of today’s military vehicles, sand and dust may...
Metal components, zinc plated nuts and bolts, surface coatings, and paint may be tested for corrosion resistance in salt spray test chambers or salt fog chambers....
It is possible to test the reaction of goods when they are exposed to fluctuations in humidity by using a humidity chamber. This chamber is also...
Uncontrolled environmental conditions, such as temperature and humidity, may be achieved in an Environmental Chamber, which is an enclosed chamber. By delivering salt spray within the...
In the field of environmental testing, and the environmental chamber is a device that enables users to manipulate the ambient conditions in an enclosed space to...
The reason why LED lighting is easy to spread the flame inside the equipment insulation material or other solid combustible material parts may be ignited by...
The International Electrotechnical Commission (IEC) created the IEC 60068 standard, which is widely accepted throughout the world. Environmental testing for electronic equipment, components, and electromechanical products...
Climate chambers are enclosed spaces used to evaluate the impact of certain environmental conditions on biological things, industrial goods, materials, and electrical devices and components. Environmental...
The high and low temperature humidity environmental chamber is a test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc., used to test...
Salt spray test is a kind of environmental reliability test, mainly used to test the corrosion resistance of metal materials of lamps. In order to verify...
The high and low temperature environmental test chamber is also called the high and low temperature cycle test, which is one of the product environmental reliability...
When the dustproof test instrument fails, stop heating. After the test is completed, first turn off the operation switch, and then turn off the main switch....
The high and low temperature environmental chamber is formed by CNC machine tools, the humidification system pipeline is separated from the control circuit board, and the...
The salt spray test chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other...
The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food,...
The salt spray test is divided into two categories, one is the natural environment exposure test, and the other is the artificial accelerated simulated salt spray...
The main purpose: The Glow Wire Tester/Glow Wire Test device is used to detect the thermal stress caused by heat sources or ignition sources such as...
The salt spray chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other anti-corrosion...
Introduction: The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances,...
Temperature, humidity, and other environmental factors may be regulated in an Environmental Chamber. Corrosion may be simulated in certain chambers by spraying salt into the room....
An environmental chamber’s job is to find out how a product will perform in various climatic, physical, and other unusual circumstances. When a product is being...
Expert equipment for environmental testing, semi-conductive testing, chemical stability tests, and more is a temperature test chamber. The size of an environmental chamber temperature test chamber...
The walk-in environmental chamber is intended to determine the characteristics of your goods to deal with external conditions such as heat, cold, dryness, moisture, etc. The...
Introduction of glow-wire tester: The glow-wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such as hot...
Application: The salt spray test machine is suitable for the surface treatment of various materials, including paint, electroplating, organic and inorganic film, anode treatment, anti-rust oil,...
Environmental chamber is the general name of all test chambers that simulate natural climate environment. The representative products include salt spray test chamber, high and low...
Introduction to Glow Wire Tester: The glow wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such...
Test method of salt spray test chamber • First power on the salt spray test chamber (plug in) • Press the red power switch, the salt...
The high and low temperature humidity chamber, as its name implies is the experimental equipment that performs high and low temperatures on the product. The production...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
1. Introduction: The salt spray corrosion test equipment meets and applies to the standard GB/T2423.17-2008 for salt spray test of electrical and electronic products promulgated by...
The Salt Spray Test Chamber is an environmental test equipment that evaluates the corrosion resistance of products or metal materials by artificially simulating salt spray environmental...
To verify whether the metal parts on the product will corrode when exposed to the atmosphere or other environments, the product can be placed in the...
The Salt Spray Test Chamber can be used to evaluate the salt spray corrosion resistance of materials and their protective coatings, compare the process quality of...
The full name of IEC 60068-2-11-3.1 is <Basic environment testing procedures Part 2: Tests Test Ka: Salt mist>. It is edited by the IEC technical committee...
The full name of IEC 60695-2-10-1 is Glow/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
Many customers have purchased LISUN GDJS Walk-in environmental chamber , but they will not use them frequently after purchase. It often needs to be idle for...
ISO is the worldwide union of national standards. The international standard ISO 9227 has been developed by the ISO/TC 156 Metals and Alloys Corrosion Technical Committee....
Glow Wire Test introduction: The glow wire testing uses simulation technology to assess the fire hazard of thermal stress caused by heat sources such as hot...
The test requirements for the IP level test of road vehicles lamps mainly refers to ISO20653, DIN 40050-9, and ISO12103, which defines the IP level, test...
High and low temperature and humidity controlled chambers GDJS Series is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
The environmental conditions test standard for automotive exterior lighting and optical signal devices is ISO16750 <Road vehicles-Environmental conditions and testing for electrical and electronic equipment>, IEC60068-2,...
Introduction for the High and Low temperature humidity Chamber: High and Low temperature humidity Chamber adopts imported special man-machine interface temperature and humidity controller, which is...
Introduction for the dust-proof chamber: The dust-proof test chamber is suitable for the dust and dust resistance tests of various auto parts. The test parts include...
The glow wire test is to test the stability of electronic and electrical products at work. The glow wire itself is actually a fixed-size resistance wire...
Forehead thermometers is both medical product and electronic product. It only needs one or two seconds to complete a body temperature measurement, which is very suitable...
The full name of IEC 60068-2-1 is Environmental Testing Part 2-1: Tests-Test A: Cold. It is edited by the IEC technical committee in 2008.We will introduce...
LISUN GDJS seriesHigh and Low Constant temperature and humidity chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
In general, LED can be used for more than 50000 hours, and some manufacturers are promoting their LED to operate for about 100000 hours. The main...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
The Hong Kong International Lighting Fair has become the largest industry exhibition in Asia, and the second largest in the world. LISUN participates this exhibition every...
HKTDC Hong Kong International Lighting Fair (Autumn Edition) 2017, organized by the Hong Kong Trade Development Council at the Hong Kong Convention and Exhibition Centre (HKCEC)...
Istanbul Light is an international platform, where all the players in the lighting industry come together under a same roof and where the latest technologies and...
In September and October 2013, Chairman Xi put forward a major initiative of building “The Silk Road Economic Belt” and “The 21st Century Maritime Silk Road” (referred to...
High Low temperature and humidity test chamber is used to simulate a actual temperature and humidity environment which it may caused any influence for surrounding objects....
In natural environment, temperature and humidity are two indivisible natural factors. Due to different geographical locations in different regions, the temperature and humidity effects generated are...
In recent years, many manufacturers are planning to manufacture common global LED drive products with a wide voltage input. But since different countries have different product...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
LVD’s goal is to ensure the safety usage of low-voltage equipment. Its range of application is on electrical products with voltage at 50V to 1000V AC...
Nowadays, with the development of LED industry, its technology continues to be mature and has widely applied at home and abroad. Comparing to mature markets in...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
India lighting market develops rapidly, research reports point that LED lighting market scale will reach 1.14 billion dollars, growth 47.1%. India government intends to make India...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
IESNA-LM-80 (Measuring Lumen Maintenance of LED Light sources) is an approved method by Lighting Engineering Association of North America (IESNA) for the third generation SSL products;...
LED has the features of long life, but with the different working condition and drive current, its life will be different, but generally the life will...
At the end of October 2016, Lisun attended lighting fair in as in previous years. Hongkong International Lighting Fair has been an ideal platform for LED...
In October 5th-7th 2016, New Delhi LED lighting exhibition held in New Delhi, the capital of India. As one of India’s largest LED lighting exhibition, New...
Under the effect of high temperatures, the structural characteristics of non-metallic materials, insulation materials will change greatly, which manifests itself softened or melted. Ball pressure test...
Lisun will come with professional technical team to attend 2016 Germany Frankfurt Lighting Fair( Light + Building) dated on 13th Mach ~18th March, 2016. This time...
Glow wire test is to test the stability of electrical and electronic products during working. And the hot wire itself is the resistance wire ring with...
IEC 60529 (GB4208-2008) IP code is a coding system to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of...
The 2015 New Delhi Autumn LED Expo was successfully held during 3th December~5th December. As one of India biggest exhibition, this exhibition main relate different lighting...
It is the second time we have attended the fair, and it is a successful and wonderful fair. Lisun’s booth attracks numerous people’s visit.
During the exhibition, Lisun showed its main instruments which attracted many customers to stop and talk. Among them, there are not only many old customers hope...
USA Environmental Protection Agency(EPA) and Department of Energy(DOE) successively released Energy Star and Lighting Facts Standards for LED Luminaires/Bulb from 2010, which makes relevant industry persons...
As in previous year, Lisun and its instruments appeared at booth ED-A01 of Hong Kong International Lighting Fair (Autumn Edition) during 27th October to 30th October....
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
