Talking about salt spray test chamber

1. Introduction:
The salt spray corrosion test equipment meets and applies to the standard GB/T2423.17-2008 for salt spray test of electrical and electronic products promulgated by China; the salt spray test standard for metal coatings GB 6458, GB 6459, GB6460; It is used for assessment Salt spray test standards for electroplated coatings of light industrial products GB 5938, GB 5939, GB 5940; mainly applicable to the salt spray test standards of paint layers GB/T1771-2007 and GB/T10125-1997, ASTM-B117-73, GB10587, GJB150, DIN50021-75, JIS C5028-75, ISO3768, 3769, 3770 continuous salt spray, etc. and other international standards. It’s widely used in electronics, electrical and automotive, motorcycles, hardware tools and other products, parts, metal materials and the plating and coating of products are subjected to salt spray corrosion tests.

2. Application:
The salt spray test chamber mainly tests the corrosion resistance of various materials after the surface treatment of various materials, including coating, electroplating, inorganic and surface film, anodizing, anti-rust oil and other anti-corrosion treatments.

3. Principle:
The corrosive solution is sprayed into mist by compressed air, and the mist surrounds the test sample in the test box.
Testing can be continuous or cyclic.
The corrosion resistance of each sample is defined as the time when the sample is corroded. The longer the time, the better the corrosion resistance will be.

4. Safety protection device of salt spray corrosion test chamber:
1. No fuse protector;
2. Over-temperature protection of the test chamber;
3. Water shortage protection of the test chamber;
4. Test operation instructions;
5. Indication of the end of the test;
6. Saturator low water level protection;
7. Two-stage voltage stabilization and voltage regulation protection for compressed gas.

LISUN developed and produced YWX/Q-010 salt spray chamber according to market demand. Customers can also choose salt spray test chamber of different specifications and sizes according to the size of the product being tested. The following is the product picture of LISUN Salt Spray Test Chamber:

YWX/Q-010_Salt Spray Test Machine

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test System, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618917996096