LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
The standard IEC 60309-1:2021 applies to plugs, fixed or portable socket-outlets and appliance inlets with a rated operating voltage not exceeding 1,000 V DC or 1,000 V AC, a frequency not exceeding 500 Hz and a rated current not exceeding 800 A, which are mainly used in industrial occasions both indoors and outdoors. This fifth edition supersedes the fourth edition in 1999, Amendment 1 in 2005 and Amendment 2 in 2012, bringing in technical revisions.
The significant technical changes in this edition of the standard include the addition of classification, requirements and tests for accessories with shutters; additional marking to indicate neutral terminal and/or earthing terminal; and the replacement of the term “connector” with “portable socket – outlet”. It also sets out requirements in aspects like the design and manufacturing of plugs and socket-outlets, electrical safety, environmental adaptability, mechanical strength, interchangeability, as well as marking and instructions, aiming to ensure the quality and safety performance of industrial plugs and socket-outlets.
IEC 60309-1:2021 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes – Part 1: General requirements
LISUN supplies the fully test solutions for the following IEC 60309-1:2021, please see the below excel table:
| IEC 60309-1:2021 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes – Part 1: General requirements | LISUN MODEL |
| Clause 9 Protection against electric shock | SMT-PB |
| SMT-20N | |
| SMT-1N | |
| Clause 10 Provision for earthing | WB2678A |
| Clause 11.1.4 Thickness of coating/chemical analysis | EDX-2A |
| Clause 11.3.8 Bending Test | JCY-2 |
| Clause 24.4 Flexing Test | |
| Clause 11.5.2 Pulling Force | PULL-2000KG |
| Clause 11.7.1 Temperature-cycling test | GDJS-015B |
| Clause 13 Resistance to ageing of rubber and thermoplastic material | |
| Clause 18.3 withstand humid conditions | |
| Clause 18.1 IPX4 according | JL-X |
| Clause 19 Insulation resistance and dielectric strength | WB2681A |
| Clause 22 Temperature rise | WS-1 |
| Clause 23.3 Pull Test | LS-B07 |
| Clause 24.2.2 Impact Test | IK07-10 |
| Clause 26 Creepage distances, clearances and distances through sealing compound | CK-1 |
| Clause 27.1 Ball Pressure testing | ZBP-T |
| Clause 27.2 Glow Wire Test | ZRS-3H |
| Clause 27.3 resistant to tracking | TTC-1 |
| Clause 28 Corrosion and resistance to rusting | YWX/Q-010 |
There are some standards focus on specifying technical requirements and test methods for different categories of lampholders in the lighting field, ensuring their safety, compatibility, and...
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN’s cable and wire test solutions meet IEC 60245-1, IEC 60227-1, IEC 60502-1 and IEC 60189 standards, covering electrical, mechanical, and safety tests for global compliance.
LISUN has all equipment according to the IEC60669 measurement, including environmental chamber, IP code waterproof dustproof test, switch lift test, etc.
LISUN’s plugs and sockets test solutions meet IEC 60884-1, IEC 60670-1, IEC 62613-1 standards, covering electrical, mechanical and safety tests for global compliance.
LISUN provide full test solutions for HID lamp, including integrating sphere system, goniophotometer system, EMI EMC chamber, HID ballast tester, electrical safety test, etc.
Lisun can supply full test solutions for fluorescent lamp, including integrating sphere system, goniophotometer system, EMI EMC test, electronic ballast tester, electrical safety test, etc.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract Salt spray corrosion is a major environmental factor affecting the service life and reliability of metal, coating, electrical and electronic products. As the core equipment...
Abstract: The waterproof performance of electrical and electronic product enclosures directly determines the safety, reliability and service life of equipment under humid, rainy, immersion and other...
Abstract: Gold machine tester is a core testing instrument in precious metal trading, jewelry quality inspection, recycling identification and alloy composition analysis. It also supports RoHS...
Abstract Salt testing equipment has emerged as an essential instrument for evaluating the corrosion resistance of metallic materials and protective coatings across diverse industrial applications. This...
Abstract Water spray test chambers designed for IPX5 and IPX6 waterproof testing represent critical equipment for verifying the ingress protection capabilities of electrical and electronic product...
Abstract: Glow wire flammability index (GWFI) is a core indicator for evaluating the flame retardant performance of products and plastic components in electrical and electronic engineering,...
Abstract As core equipment for verifying the environmental adaptability and reliability of industrial products, the temperature and humidity environmental chamber can accurately reproduce the dynamic changes...
Abstract As the core testing equipment for simulating artificial salt spray corrosion environments, salt spray cabinet is a key tool for evaluating the corrosion resistance of...
Abstract: With the continuous upgrading of the EU RoHS Directive and the increasing requirements for environmental compliance of electronic and electrical products worldwide, rapid and accurate...
Abstract In the R&D and quality inspection of products in LED lighting, electrical and electronic, and electronic component industries, environmental adaptability and reliability verification are core...
Abstract: This paper takes the JL‑56 IPX5 and IPX6 Waterproof Testing Machine in the LISUN JL‑X waterproof test system as the research object. Based on the...
Abstract IPX3/4 testing for lighting fixtures represents a critical validation methodology for luminaires deployed in challenging environmental conditions. This systematic analysis examines the oscillating tube apparatus...
Abstract Glow wire apparatus testing has become a critical method for evaluating flame retardancy and fire safety of electrical and electronic products. This paper presents a...
Abstract: The salt spray corrosion test chamber is a core environmental simulation device for corrosion resistance testing of materials and products, playing an irreplaceable role in...
Abstract: Flame retardancy performance is a core safety indicator for electrical and electronic products, household appliances, lighting equipment and their plastic components. As a high-precision testing...
Abstract IEC 60529 IPX3/IPX4 Testing establishes the definitive methodology for evaluating enclosure protection against sprayed water in luminaire applications. This comprehensive analysis examines five critical engineering...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
Abstract: The systematic evaluation of the waterproof performance of electronic and electrical products is a critical step in ensuring product reliability and market compliance. As the...
Abstract: Thermal chamber is a core instrument for verifying the environmental adaptability and reliability of industrial products, and plays a critical role in R&D and quality...
Abstract: The water spray test is a core method for verifying the waterproof and protective capabilities of electronic and electrical products. By simulating water ingress conditions...
Abstract: The RoHS tester is core equipment for hazardous substance compliance testing of electrical and electronic products. Based on energy‑dispersive X‑ray fluorescence (EDXRF) technology, the LISUN...
Abstract: As the core functional unit of the high and low temperature humidity alternating test chamber, the temperature humidity controlled chamber is the key to achieving...
Abstract: Salt spray test corrosion is a core method for evaluating the corrosion resistance of materials and products. As a key device for simulating salt spray...
Temperature and humidity are core environmental factors affecting the performance stability and structural reliability of industrial products. LED lamps, electronic components and various industrial materials have...
Abstract With the increasing stringency of global environmental regulations, RoHS tester has become a mandatory requirement for electrical and electronic products to enter the international market....
Abstract With the rapid development of electrical and electronic products, household appliances, lighting equipment and other industries, the flame retardancy of products and plastic components has...
Abstract With the continuous improvement of waterproof performance requirements for products in industries such as electronic and electrical appliances, auto parts, ipx8 waterproof testing (the highest...
Abstract:With the acceleration of global industrialization, the ability of electronic, automotive, and lighting equipment to withstand extreme climatic conditions has become a core measure of product...
Abstract Salt spray corrosion is one of the main environmental factors leading to the failure of metal materials and various industrial products. The global economic loss...
Abstract As an efficient and accurate element analysis equipment, the metal XRF analyzer plays a crucial role in industrial testing, environmental monitoring and other fields relying...
Abstract This paper systematically elucidates the technical principles and standardized methodologies for the IPX3 and IPX4 water ingress testing, which are critical assessments within the ingress...
Abstract In the process of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are key factors...
Abstract In the system of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are core indicators...
Abstract How to do ball pressure test? The Ball Pressure Test is a core safety assessment procedure used to evaluate the thermal deformation resistance of non-metallic...
Humidity chamber is not a generic laboratory enclosure but it is a precision system that has a direct effect on the validity of reliability stability and...
The thermal test chamber is a fundamental tool of accelerated aging and analysis of the heat stress due to the fact that the heat is among...
The climate test chamber is used to simulate controlled climatic conditions such as temperature and humidity that the product undergoes during storage transportation and operation. Climate...
The use of high temperature test equipment is critical in whether materials would be able to survive and perform reliably under high thermal stress. Heat resistance...
A mini temperature chamber has proved to be a necessity in laboratories requiring accurate thermal regulation and is less costly in footprint and at the same...
A glow wire test apparatus is a vital tool that can be used to measure the fire hazard in electrical and electronic devices. It replicates the...
A humidity test chamber is one of the foundations of stability testing in which moisture-induced degradation is a believable risk. Water vapor undergoes interactions on its...
Environmental test program qualifies electronic components as a basic condition that they should be able to work under various operating and storing conditions. Electronics in modern...
A climatic chamber is a major equipment in checking whether components are viable and can perform well in the case of combined temperature and humidity pressure....
Environmental chamber lacks being just hot or cold. Qualification of current products involves concomitancy and simultaneous regulation of airflow temperature and humidity plus in certain cases...
Abstract In the design and manufacturing of modern electrical and electronic products, the enclosure protection rating is a core indicator for assessing their reliability, safety, and...
A thermal chamber is a key laboratory equipment that is utilized to analyze the product behavior under temperature stress. Diminished time, duration of thermal exposure In...
Abstract Salt spray corrosion is one of the core factors leading to metal material failure and reduced product reliability in marine environments and industrial scenarios. Accurately...
Knowledge of the behavior of materials to repetitive temperature variations is vital in the design of durable products used in electronics, automobile, aerospace, and manufacturing industries....
Innovative products are supposed to perform in various weather conditions under extreme temperatures and humidity, high or low rates of climatic changes, as well as being...
In real-life situations, the products are hardly subjected to constant temperatures. Rather, they are subject to unremitting fluctuation as caused by climate, operating load, and nearby...
The conditions in the modern automotive and aerospace systems are so harsh that they subject materials, electronic and mechanical assemblies to the supreme strain. Temperature variations,...
The glow wire test standard is the most broadly applied test to determine the ignition resistance of insulating materials, plastics and enclosure parts subjected to overheating...
Exposure to water has become one of the leading factors of failure of the electronic and mechanized commodities which are either being used in the outdoor...
Thermal stress analysis is an important tool in establishing the behavior of materials, electronics, and mechanical assemblies at excessive temperatures. The temperature test chamber will be...
Safety inspection of electrical and electronic products in regard to fire safety is a prerequisite in the world-wide industries. As devices get smaller and denser and...
Abstract Ground resistance testing is a fundamental and mandatory inspection for assessing the safety of electrical equipment and systems. A ground resistance tester evaluates the integrity...
Waterproofing is a critical design consideration to current electronic and mechanical designers that consider using their products in wet or outdoor environments. Consumer electronics, industrial controllers,...
The contemporary product production needs testing in the real environment, rather than laboratory testing on its own, when controlled. Materials, electronics, mechanical structures, and coatings as...
With the globalization of industries towards electrification, smart power distribution, automobile automation and electronics in consumer devices being smaller than ever, the demand has been put...
The ingress protection testing has been significantly changed in the past 10 years with the push of industries among outdoor-rated electronics, sealed industrial controls, marine-rated automation,...
Environmental testing is essential in engineering industries including the automotive, defence, electronics manufacturing, industrial equipment and medical equipment and aerospace industries as it assures durability and...
With the ever-increasing integration of electronics, composite materials and precision mechanical systems in modern products, there is an increased concern regarding reliability of these modern products...
Fire safety has been one of the factors that are very relevant in designing electrical and electronic products. The size of circuits is decreasing and heating...
Modern products have to resist environment conditions up to soft rains and jets of high pressure as well as short-term immersion. It does not matter whether...
Ingress protection test is one of the significant quality assurance measures of present day electrical and mechanical products. An IP test machine enables the engineers to...
The reliability and stability of the modern materials, electronics, and other consumer products is tested on the controlled environment in which temperature and humidity can be...
1. Introduction 1.1 Research Background and Significance In industrial production and practical applications, metal materials and various products are often exposed to the erosion of chlorine-containing...
Abstract This paper focuses on the LISUN GDJS-015B Temperature and Humidity Control Cabinet, systematically expounding its technical principles, core performance parameters and industrial application value. As...
Abstract This paper focuses on the LISUN EDX-2 Series Energy Dispersive X-ray Spectrometers, systematically expounding their detection principle based on the characteristic X-rays of elements, analyzing...
Abstract This paper focuses on the LISUN ZRS-3H Glow-Wire Tester, a high-precision testing device developed by LISUN specifically for evaluating the flame-retardant properties of electrical and...
Abstract In the links of product R&D, production, and quality control, environmental reliability testing is a key means to verify the performance stability of products under...
Abstract In the field of industrial product reliability testing, salt spray corrosion testing is a key method for evaluating the corrosion resistance of materials and coatings,...
Abstract In the field of electrical and electronic product manufacturing and quality inspection, the mechanical impact strength of enclosures is one of the core indicators for...
Abstract The waterproof performance of enclosure protection levels is a core indicator for measuring the reliability of electronic and electrical products, especially crucial for outdoor LED...
Abstract In the fields of material research and development and product quality testing, the impact of climatic environments on performance is crucial. As a core testing...
Abstract: In the production and quality inspection of lighting products, power equipment, and outdoor application equipment, the mechanical impact strength of the shell is a core...
Abstract: This paper elaborates on the working principle of XRF analysers (Energy Dispersive X-Ray Fluorescence Spectrometers), which involves analyzing the wavelength and intensity of characteristic X-rays...
Abstract The flammability test for plastics is a fundamental assessment in material science and product safety, particularly for components used in electrical and electronic appliances. Among...
Abstract Ingress Protection (IP) testing, as defined by international standards such as IEC 60529, is critical for ensuring the reliability and safety of electrical and electronic...
Abstract Salt spray corrosion, as one of the most destructive forms of atmospheric corrosion, poses a severe threat to the durability and reliability of metal materials...
Abstract Glow wire flammability testing is a critical evaluation method for assessing the fire safety of polymeric materials used in lighting devices, electronic products, and household...
Abstract Humidity and temperature chamber, also known as environmental test chamber or thermal chamber, is a critical equipment designed to simulate various climatic conditions for evaluating...
In the ever – evolving landscape of industrial and consumer product manufacturing, the protection of internal components from environmental factors, especially water ingress, is of utmost...
Introduction Heating chambers, also known as environmental test chambers, are critical tools in reliability testing, widely employed to simulate extreme climatic conditions such as high temperature,...
Introduction In the operation and maintenance of modern electrical equipment, insulation resistance testing is a critical process for ensuring safety, reliability, and performance. This testing method...
Introduction Environmental chambers are sophisticated testing instruments designed to replicate extreme environmental conditions such as high temperatures, low temperatures, humidity, salt spray, and vibrations. These...
Introduction A salt fog chamber, commonly referred to as a salt spray test chamber, is a sophisticated piece of equipment designed to replicate the harsh, corrosive...
Introduction A waterproof test chamber is a sophisticated piece of equipment designed to simulate wet environments, such as drizzle, heavy rain, spray, or full immersion, to...
Introduction Low temperature testing is a cornerstone of environmental reliability testing, playing a pivotal role in industries such as electronics, automotive, aerospace, and materials science. This...
Introduction In modern industrial production and scientific research, high-low temperature and humidity alternating test chambers are critical environmental testing devices widely used in industries such as...
Introduction In the contemporary world of electrical and electronic product design, IP (Ingress Protection) ratings serve as a crucial metric for assessing the capability of device...
Introduction In the design of modern electronic products, Ingress Protection (IP) ratings are crucial standards for assessing a device’s ability to withstand environmental factors such as...
Introduction In modern industry and scientific research, environmental simulation equipment plays a crucial role. These devices can precisely control key parameters such as temperature and humidity,...
Introduction Corrosion testing plays a crucial role in quality assurance laboratories within the metal industry, especially when it comes to quality control testing. The LISUN YWX/Q-010...
Introduction In today’s rapidly evolving industrial landscape, ensuring the safety and reliability of materials under extreme conditions is more critical than ever. Among various testing methods,...
Abstract Leakage tracking testing is a crucial evaluation method used to determine the resistance of insulating materials to electrical tracking under various environmental conditions. This paper...
Abstract The insulation resistance tester plays a crucial role in ensuring the safety and efficiency of electrical equipment. The LISUN WB2681A, as an advanced insulation resistance...
In the modern world, ensuring the fire safety of electrical products and materials is of paramount importance. The quality and safety of electrical and electronic devices,...
Abstract The IEC 60695-10-2 standard, commonly referred to as the Ball Pressure Test Method, plays a pivotal role in evaluating the heat resistance of electrical components,...
Corrosion is one of the most significant challenges faced by materials exposed to harsh environments. Whether in industrial equipment, automotive parts, or consumer electronics, corrosion can...
Abstract This paper explores the importance of the ball press test for resistance to heat (also known as the ball pressure test) in ensuring the safety...
Abstract In the modern world, the safety of electrical and electronic products, as well as household appliances, has become a critical concern due to the potential...
Introduction Corrosion is a major issue affecting materials, particularly metals, across various industries. In order to understand the corrosion resistance of materials, accelerated testing methods such...
Abstract Temperature and humidity chambers play a critical role in evaluating the durability and performance of various materials and electronic components under different climatic conditions. This...
Abstract Waterproof testing is a crucial part of ensuring the durability and functionality of products exposed to water or harsh environmental conditions. A reliable waterproof testing...
Introduction In the field of environmental testing, the thermal cycle test chamber plays a crucial role in ensuring the reliability of materials, components, and products under...
Abstract Flame retardancy testing is crucial for ensuring the safety of electrical and electronic products. The Glow Wire Test Procedure is a widely recognized method used...
Abstract: The IPX4 waterproof test plays a critical role in determining the water resistance of electronic devices, electrical components, and other products used in various industries....
Introduction Corrosion is one of the primary concerns in the durability and longevity of industrial and consumer products. To mitigate the effects of corrosion, rigorous testing...
Abstract This article explores the applications and principles of waterproof rain test chambers, focusing on their use in evaluating enclosure protection grades under various standards such...
Abstract: This paper focuses on the corrosion resistance testing method of metal deposits and chemical treatment layers of light industrial products based on the ASTM B117...
Abstract: XRF fluorescence, or X-ray fluorescence, is a non-destructive analytical technique used to determine the elemental composition of materials. By analyzing the characteristic wavelengths emitted by...
Introduction Temperature and humidity testing plays a crucial role in assessing the durability and reliability of products in extreme environmental conditions. The LISUN GDJS-015B Temperature Humidity...
Abstract: This paper comprehensively investigates the detrimental effects of salt spray corrosion on various products and highlights the advantages of the LISUN YWX/Q-010 Salt Spray Test...
Introduction Corrosion is a critical challenge for many industries, particularly those working with metals and alloys. The salt spray test is one of the most widely...
Abstract Water quality testing equipment is often exposed to challenging environments, including water, dust, and humidity. Ensuring the equipment’s durability and reliability requires stringent waterproof testing...
Introduction The climate test chamber is an advanced tool designed to simulate various climatic conditions, such as heat resistance, cold endurance, dryness resistance, and humidity tolerance....
Introduction In the world of material testing, one of the most critical assessments for understanding the durability of products in harsh environments is salt spray corrosion...
Abstract The XRF machine, an essential tool for non-destructive material analysis, is pivotal in industries ranging from electronics to metallurgy. Among the leading models in this...
Flammability testing is a critical step in assessing the safety of materials used in electrical and electronic products. The glow wire test machine, such as the...
Corrosion is a persistent issue affecting the durability and performance of components, parts, electronic devices, metal materials, and industrial products. Salt Spray Test Chambers, such as...
Abstract The waterproof chamber is an essential tool for evaluating the ingress protection (IP) ratings of electronic and electrical products against water intrusion. This paper discusses...
Introduction In today’s increasingly demanding industrial landscape, testing the durability and performance of products under various climatic conditions is critical to ensuring product reliability and long-term...
Introduction In the field of electrical safety testing, the tracking resistance of insulation materials is an important criterion for evaluating their performance under high voltage and...
Abstract Insulation resistance testing plays a crucial role in determining the safety and operational efficiency of electrical equipment. An essential tool for this process is the...
Abstract This paper focuses on the ZRS Glow Wire Tester, specifically the LISUN ZRS-3H Glow-wire Test Apparatus, analyzing its application in flame retardant testing within quality...
Abstract The Ball Pressure Test for IEC 60695-10-2 is essential for evaluating heat resistance in electrical products, specifically focusing on components such as plugs and sockets...
Abstract The salt spray corrosion test, an accelerated corrosion testing method, is extensively used to assess the corrosion resistance of various materials and coatings. This study...
Abstract This paper explores the use of the LISUN EDX-2A RoHS Testing Equipment in performing elemental analysis on gold samples. EDXRF technology, as employed by the...
Introduction The importance of environmental testing has grown exponentially as industries seek to ensure the durability and reliability of their products. One of the most commonly...
Introduction Metal analysis is essential in various industries such as manufacturing, environmental testing, and quality control. One of the most efficient and non-destructive techniques used for...
Introduction The salt spray machine plays a critical role in the evaluation of material resistance to corrosion, particularly in industrial applications. One of the industry-standard tools...
Introduction The IP65 test is a critical procedure for determining the effectiveness of enclosures in protecting internal components from environmental factors such as dust and water....
In various industries, understanding the durability and resistance of materials to corrosive environments is essential. One common method to evaluate this is the salt contamination test,...
Introduction ASTM B117 salt spray testing is one of the most widely used methods for assessing the corrosion resistance of materials and coatings. It simulates harsh...
Water resistance testing is a critical method for evaluating the durability and performance of materials and products in corrosive environments. The salt spray test, specifically, is...
Salt spray testing is a crucial method for evaluating the corrosion resistance of materials and coatings. This paper explores the fundamental principles of salt spray tests,...
Abstract This article explores the use of humidity test chambers to evaluate product performance under varying climatic conditions. Emphasizing the importance of meeting industry standards, such...
The High and Low Temperature Humidity Chamber is an essential tool used in various industries to simulate environmental conditions, including temperature fluctuations and humidity levels. This...
Energy Dispersive X-Ray Fluorescence (EDXRF) spectrometry is a powerful technique used for elemental analysis and RoHS (Restriction of Hazardous Substances) compliance testing. XRF spectrometers are widely...
Environmental testing is critical in understanding how various products respond to changing climatic conditions. This paper discusses the role of thermal shock chamber, specifically the LISUN...
Abstract Waterproof testing is crucial in ensuring the safety and functionality of electrical and electronic products in wet and humid conditions. This paper explores the principles,...
Abstract Humidity chambers, particularly the LISUN GDJS-015B Temperature Humidity Chamber, play a crucial role in simulating and testing the resilience of various materials and components to...
X-ray spectrophotometers play a crucial role in material analysis, particularly in the detection and quantification of elemental compositions. These instruments are essential for ensuring compliance with...
Abstract The salt mist test, a critical assessment method for evaluating the corrosion resistance of materials, plays a vital role in ensuring the durability and reliability...
Abstract Ingress Protection (IP) testing is crucial in determining the durability and reliability of electronic devices and components exposed to environmental factors. The LISUN JL-X IP...
Electrical safety is paramount in the design and manufacturing of modern electronic devices. To prevent fire hazards and ensure product reliability, manufacturers must conduct rigorous testing...
In today’s highly competitive electronics market, product durability and reliability are critical factors that can determine a product’s success. As consumer demand for waterproof and weather-resistant...
Abstract In the ever-evolving technological landscape, ensuring the durability and reliability of electronic devices and components is critical. Environmental test equipment plays a crucial role in...
Introduction The EU RoHS 2.0 directive, issued in 2011, is a critical regulation aimed at limiting the use of hazardous substances in electronic and electrical products...
Waterproof test chambers are critical tools for evaluating the water resistance of household, commercial, and industrial electrical and electronic equipment. These chambers adhere to international standards...
As a key component in the automotive power system, the performance of the drive solenoid valve directly affects the power output, fuel efficiency, and overall operational...
In today’s automotive manufacturing industry, quality inspection is a critical step to ensure the quality and performance of products. As automotive technology advances and consumer demands...
Principle of Operation of the Leakage Tracer Tester The operation principle of a leakage tracer tester primarily involves insulation quality testing and leakage current testing of...
Overview The salt spray test chamber is primarily used for conducting corrosion tests to ensure the quality of ferrous metals and their coatings. This test is...
What is a Coating Thickness Analyzer? A coating thickness analyzer, also known as a coating thickness gauge, electroplating layer tester, or anti-corrosion layer detector, is an...
Overview Ball Pressure Test (Resistance to Heat) is a critical experiment for evaluating the heat resistance performance of insulation materials, primarily used to support and protect...
The Impact of Salt Spray on Electronic Products and Mitigation Measures Salt spray is widely present in marine, atmospheric, terrestrial, lake, and river environments, inevitably exposing...
What is a RoHS Tester? A RoHS tester is a specialized device used to ensure compliance with the European Union’s RoHS (Restriction of Hazardous Substances) directive....
Salt Spray Test Chamber: Testing Standards Salt spray test is an environmental test that evaluates the corrosion resistance of products or metal materials by simulating a...
Overview Glow Wire Testing is a crucial method for evaluating the stability of electronic appliances during operation. By simulating high-temperature conditions resulting from electrical faults, this...
The RoHS tester is an instrument used to detect the presence of hazardous substances restricted by the EU RoHS standard, primarily detecting six harmful substances including...
With the continuous development of technology and the improvement of people’s living standards, electronic products and mechanical equipment have become an indispensable part of daily life....
Environmental testing refers to exposing products or materials to specific conditions, either natural or artificial, to evaluate their performance under realistic storage, transportation, and usage scenarios....
The high and low temperature test chamber is an essential device for conducting reliability tests on industrial products. It simulates high and low temperature environments to...
Introduction: Leakage tracking test equipment plays a pivotal role in the production and quality supervision of electrical products. Understanding the concept of leakage tracking test equipment...
What is Ground Resistance? Ground resistance refers to the resistance encountered by current flowing from the grounding device into the earth and then dispersing to another...
Corrosion testing is widely employed in quality assurance laboratories within the metal industry as a critical step in quality control testing. These tests are typically conducted...
In-depth Analysis of Pressure Testing Methods and Standardization Guidelines Operation Steps and Methods of Ball Pressure Testing: 1. Sample Pressure Treatment: Place the sample under the...
In today’s society, with the increasing awareness of environmental protection, people’s demands for products have expanded beyond mere functionality and performance to include environmental friendliness and...
In modern manufacturing, connectors are one of the essential components, widely used in electronic devices, the automotive industry, and communication equipment. To ensure product safety, human...
In-Depth Analysis of Ball Pressure Test Apparatus and Standardization Guidelines of Ball Pressure Test Ball Pressure Test Procedure and Methods: • Sample Pressure Treatment: Place the...
What application of Glow wire tester? Glow wire tester is a widely used method for assessing the flammability of plastic sheets or components. This testing procedure...
With the development of technology and increasing environmental awareness, people are paying more attention to the environmental friendliness of products. RoHS (Restriction of Hazardous Substances) is...
Waterproof test machine is applicable to a wide range of products, including but not limited to electronic components, outdoor lighting fixtures, automotive accessories, communication equipment, cabinets,...
Solid insulation materials may form some conductive paths under the joint action of electric field and electrolyte, that is, leakage discharge traces may occur, and the...
Temperature Humidity Chamber introduction: Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
What is An Insulation Resistance Tester? Insulation resistance tester is an important technical tool to measure the protective capacity of electrical systems. It evaluates the electrical...
What is A Ball Pressure Test Ball Pressure Test is a safety regulation test to examine the heat-resistance performance of product materials. The temperature of the...
Hot wire testing is a common method used to evaluate the flammability of materials. The Glow-wire Test Apparatus is the main tool used for this type...
With the development of technology and increasing environmental awareness, people are paying more attention to the environmental friendliness of products. RoHS (Restriction of Hazardous Substances) is...
The glow-wire tester is used to simulate the ignition of insulation materials or other combustible components inside equipment that may catch fire due to a hot...
The constant temperature humidity chamber will cause different levels of damage to the machine and equipment after long-term temperature running-in. Therefore, the following points are common...
RoHS2.0 is a revised version of RoHS environmental requirements that came into effect in 2011. RoHS2.0 requirements are similar to RoHS, but with some adjustments in...
With the continuous development of modern society, there is increasingly high demand for the safety and reliability of electrical equipment. This is particularly true in the...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
What is a Waterproof Jet Test Device? IPX56 Waterproof Jet Test Device, is an open waterproof test equipment that belongs to the IPX56 standard. It is...
Introduction: In a number of different sectors, the capacity to simulate harsh weather conditions in order to test the performance and durability of items is essential....
Introduction: Temperature control is a crucial component of the manufacturing process for pharmaceutical products. This component helps ensure the quality, safety, and efficacy of the final...
Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected by...
The IPX7 Immersion tank Waterproof test Device is mainly used to test the physical and other related properties of electronic products, electrical products, lamps, electrical cabinets,...
The ipx4 Swing Pipe Water Spray Test Equipment is a waterproof performance testing equipment widely used in electronic and electrical engineering, communication, lighting, automobile and other...
With the increasing awareness of environmental protection, there has been a growing concern about hazardous substances in electronic products. In order to protect consumer health and...
In the modern society where waterproofing is ecoming more ubiquitous, more manufacturers are developing consumer products with various waterproof testing equipment. The purpose is to meet...
IPX7 Immersion tank Waterproof test Device, also known as rain test chambers, waterproof testing equipment, waterproof detectors, waterproof testing machines, IP waterproof testing machines, etc., are...
Introduction Environmental stress screening (ESS) is performed to determine the durability and dependability of electronic components and goods, and temperature and humidity chambers play a critical...
In normal applications, manufacturers of high and low temperature test chambershould pay attention to maintenance and upkeep after conducting experiments, which can increase the service life...
The high and low temperature humidity test chamber, also known as the temperature shock test chamber and the thermal cycle chamber, is a device used to...
In order to achieve reproducibility, temperature tests must be designed in such a way that the highest or lowest temperature reached at a certain point in...
With the popularity of smart devices and increasing demands for waterproof and dustproof features in devices like smartphones and watches, waterproof and dustproof technologies have received...
When it comes to the performance and reliability of components and systems, the aerospace sector is among the most demanding and crucial. Aerospace equipment must undergo...
Introduction: Solar panels are essential for capturing solar energy, which has quickly become an important renewable energy source. The need of rigorously testing the performance of...
Today’s digital era relies heavily on data centers to house and handle massive volumes of data. Energy usage and heat control are two major issues that...
Introduction As the globe moves toward cleaner and more sustainable methods of electricity production, the renewable energy industry is seeing enormous development and innovation. The development...
Introduction Environmental chambers reliability testing relies heavily on temperature cycling. Temperature cycling is a method of testing a product’s or component’s resilience and performance in severe...
Introduction: The ability to control heat is essential in the creation of any electrical equipment. Effective heat dissipation solutions are crucial to maintain maximum performance, reliability,...
Introduction Humidity’s effect on material deterioration may be measured in environmental chambers. The purpose of humidity testing is to evaluate a product’s performance and durability in...
Introductio Electronics play a crucial role in modern society because of how pervasive technology has become. Every electronic gadget, from cellphones to car systems, is built...
Introduction The Glow Wire Test is a standard procedure for determining the combustibility of electrical insulation. It’s vital to the security and dependability of electrical and...
Introduction: Products need to be well-packaged so that they don’t get damaged or spoiled while being stored, transported, or distributed. It is crucial that items get...
Introduction Environmental elements such as temperature and humidity may have a major impact on how well and how long something lasts. The aerospace, automotive, construction, and...
Introduction Electronic components are often put through their paces in today’s fast-paced technological world, where they are exposed to a wide range of environmental conditions that...
Introduction It is of the utmost importance to ensure that the batteries in electric vehicles are both reliable and secure as the number of individuals who...
Introduction The corrosive effects of salt spray on building materials in coastal areas may have a major influence on their longevity and function. Extensive testing is...
Introduction The powers of diagnosis, treatment, and monitoring have all been significantly improved because of technological advances in medicine. Before they can be utilized in a...
11 Provision for earthing 11.1 General Accessories with earthing contacts shall be so constructed that when inserting the plug the earth connection is made before the...
Introduction The food and beverage business works in an environment that is highly regulated, and the emphasis is always placed on the quality and safety of...
Introduction More and more research and development are going into improved insulation materials in an effort to make buildings more energy efficient and environmentally friendly. A...
When assessing the effectiveness of insulating materials, thermal conductivity is a key feature to take into account. Applications ranging from thermal insulation to electronics depend on...
Introduction Corrosion is a common problem that arises in many different industries because it shortens the lifespan of products, structures, and materials. Through meticulous testing and...
Introduction The performance, dependability, and longevity of automotive components and systems may be evaluated under severe temperature settings, making thermal chambers an essential tool for automotive...
The Rohs Testing Machine is the testing instrument for the EU RoHS testing standard. Simply put, it is an instrument for testing six harmful substances including...
Introduction Industries as diverse as electronics, automobiles, airplanes, and telecommunications all rely on rapid temperature change testing. It entails putting items and parts through rapid temperature...
Introduction To guarantee their safe and dependable performance under harsh environments, aircraft components and systems must undergo extensive testing and validation within the aerospace industry. Aerospace...
In addition to components such as compressors, pressure accumulators, condensers, and dryers, the refrigeration system of the high and low temperature test chamber also has several...
IEC ball pressure test is a special kind of Potting test, which is used to test the insulation resistance and shell protection insulation strength of the...
Introduction Automotive, aerospace, construction, and maritime sectors all face major corrosion challenges. Manufacturers use coatings and metals with high corrosion resistance to counteract corrosion’s destructive effects....
Introduction Humidity and temperature chambers are crucial for product testing and development in many fields. The performance, dependability, and longevity of items may be evaluated in...
Introduction Testing materials and coatings with salt spray is a common and accepted way to gauge their resistance to corrosion. Various organizations have set particular criteria...
Introduction Electronic device R&D and testing rely heavily on temperature and humidity chambers. Electronic devices must prove their dependability, performance, and durability across a wide range...
What are the standards for high and low temperature chamber? High and low temperature chamber are used to test various raw materials, such as electronics, electrical products,...
Introduction Testing and developing batteries, which are vital power sources in many sectors including automotive, electronics, renewable energy, and aerospace, need temperature and humidity chambers. Demand...
The two main functions of a high and low temperature chambers are refrigeration and heating. During the heating and cooling process, accurate, efficient, and uniform heating...
I. Introduction Materials utilized in building, transportation, electronics, and maritime applications all face difficulties outdoors. The durability and performance of these materials may be negatively affected...
Introduction Because they allow for precise and repeatable testing of components and systems under harsh climatic conditions, temperature and humidity chambers play an essential role in...
The temperature and humidity of a high and low temperature test chamber exist in two situations: alternating test chamber and constant test chamber. The control method...
Introduction Pharmaceutical research and development greatly benefits from the use of temperature and humidity chambers for the purpose of testing and evaluating medication products, formulations, and...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
Introduction Medical device testing and validation rely heavily on temperature and humidity chambers. Safety, dependability, and efficacy of medical equipment are of paramount importance; hence the...
The Salt Corrosion Test is a method that uses a test device called a “Salt Spray Corrosion Test Chamber” with a certain volume space to assess...
The IPX8 Immersion tank Waterproof test Device is applied to electronic components, outdoor lighting fixtures, mobile phone casings, automotive accessories, etc. It is a test that...
Introduction To ensure the safety, quality, and shelf life of its goods, the food and beverage sector relies heavily on temperature humidity chambers for extensive testing....
LED lighting fixtures are being used more and more extensively indoors and outdoors, and their waterproof performance has become an important consideration for users. LED waterproof...
Scope of application Suitable for performance reliability tests for industrial products. This Temperature Humidity Chamber has a large temperature control range, and its performance indicators meet...
A salt spray test chamber is used to assess the corrosion resistance of the tested samples by subjecting them to salt spray corrosion. Salt spray refers...
Introduction The performance and longevity of packing materials may be evaluated with the use of temperature and humidity chambers, which are multipurpose testing tools. The quality...
Testing Flammability with Glow Wire Test Apparatus and Needle Flame Apparatus is used to determine if a substance can be ignited and pose a risk of...
I. Introduction of Salt Spray Test Corrosion testing is widely adopted and used for quality control testing in the metal business quality assurance laboratories. The mentioned...
Programmable high low temperature chamber, also known as thermal test chamber, have been widely used in many industries to test the physical properties and endurance of...
High and low temperature chambers are a common testing equipment widely used in industries, research institutions, aerospace and other fields. By simulating extreme weather environments more...
Introduction The automobile sector has a tremendous issue from corrosion, which reduces vehicle longevity, efficiency, and safety. Corrosion testing is an essential part of ensuring the...
When selecting high and low temperature humidity and heat test chamber, we should make rational selection according to our own needs, and at the same time,...
What is Salt Fog and Salt Spray Testing? Salt Fog and Salt Spray Testing is a kind of environmental test, mainly used to evaluate the corrosion...
The appearance of the IPX34 Swing Pipe Water Spray Test Equipment and the test chamber shell are made of blue and white paint. They have evolved...
Introduction When conducting tests and experiments on materials, goods, and electronic components in a controlled environment, temperature and humidity chambers are indispensable instruments. Regular calibration of...
High temperature chamber is mainly used for high-temperature experiments in industrial and mining enterprises, laboratories, scientific research institutions, etc. It has the functions of drying and...
Temperature and Humidity Chamber is used to test the material structure and composite material, can withstand the range in the continuous environment of extreme low temperature or...
Introduction Electronic components are the backbone of contemporary technology, and many different fields depend on their dependability and efficiency. Electronic components are sensitive to temperature and...
IP Waterproof Testing Device is a high-precision testing tool for testing waterproof performance, airtightness and sealing of products. It has the advantages of precise testing and...
Introduction By replicating real-world fire events and assessing the combustibility of various materials, the Glow Wire Test equipment is an indispensable tool for detecting potential fire...
The IPX12 drip test box has the characteristics of circulating water in its box structure: for testing, it is both energy-saving and environmentally friendly. More importantly,...
The constant temperature humidity chamber is composed of six systems: control, humidity, refrigeration, heating, air circulation, and sensors. The working principles of these systems are: 1....
Introduction Manufacturing, construction, aerospace, and automotive are just a few of the sectors that rely heavily on material testing. The capacity of materials to survive various...
Waterproof Rain Test Chamber is an advanced device used to simulate atmospheric environment, so the safe use and correct operation of it is very important. So,...
Introduction The Glow Wire Test device is an essential piece of equipment for conducting fire safety tests on a wide range of materials. The capabilities and...
I. Working Principle of Each Component of High and Low Temperature Constant Temperature Chamber The cooling system of high and low temperature test box is one...
Introduction Product development and quality assurance in many sectors cannot proceed without extensive environmental testing. Manufacturers may test the performance, durability, and resistance to deterioration of...
In the production process of electronic devices, there is always a crucial step, and using a high and low temperature chamber to test product quality has...
Introduction To reach a sustainable and low-carbon future, renewable energy technologies like solar and wind power are essential. Thorough testing and assessment are required to guarantee...
Introduction A crucial part of fire risk assessment is glow wire testing, which is a useful method for analyzing the fire behavior and safety capabilities of...
Salt spray testing machine is a kind of testing device used to simulate corrosive environment containing salt gas, to evaluate the anti-corrosion performance of different materials,...
High and low temperature humidity test chamber is a scientific experiment equipment for simulating various environmental conditions. It can simulate temperature and humidity conditions in real...
I. Definition of Glow Wire Test The Glow Wire Tester is used to test the stability of electronic appliances when working. The hot thread itself is...
Why is the constant temperature humidity chamber blocked? 1. During the test, the door was opened, and there was icing in the working room. 2. The...
Introduction To make sure that textiles and clothing last and are comfortable to wear and functional, the fast-paced textile and apparel sector must use rigorous quality...
Because the high and low temperature chambers are used to test the relevant characteristics of goods, do not install them casually. If it is installed casually,...
The upgraded Tracking Test Chamber according to the new standards GB/T4207-2022 can accurately and precisely measure the specific electrical tracking indexes and comparative electrical tracking indexes...
High and Low temperature humidity chamber plays an active role in the fields of aviation, automotive, home appliances, raw materials, components, scientific research, etc. It can...
Introduction The evaluation of electronic products’ resistance to water, the assurance of their longevity, and the fulfillment of customer expectations are all facilitated by waterproof testing...
I.IK rating testing is what? IK is the shock and protection grade of the device shell. Generally, the protection requirements of IK and IP are both...
The IPX12 drip box consists of a Waterproof Test Equipment, a Waterproof Test Machine , etc. It uses the form of drip to carry out IPX1/2 waterproof...
Introduction The Glow Wire Test is an essential tool for gauging the safety of electrical and electronic components in the event of a fire. This test...
IPX7 Immersion tank Waterproof test Device indicates that the waterproof grade of the product is 7. When the product is immersed in water for a short...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
The glow wire test apparatus simulates that parts of insulation materials or other solid combustible materials that are prone to flame propagation inside the equipment may...
Glow wire testing can be used to assess fire protection in electrical equipment. It is intended to simulate what an over-heated component may cause a fire...
Introduction In today’s technologically advanced society, electrical gadgets are often exposed to the elements, including water. Manufacturers put items through waterproof testing to guarantee they can...
The high and low temperature chamber is also known as environmental test chamber is a common testing equipment that simulates extreme weather environments more realistically through...
Introduction Temperature and humidity chambers are an essential component in many companies’ efforts to reproduce and analyze the effects of temperature and humidity on a diverse...
The high temperature test chamber is also known as the environmental testing equipment, is used to put the product into the test chamber, set the high...
What is the waterproof standard of the immersion tank waterproof test device: The IP (INGRESS PROTECTION) protection level system was drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION),...
The IPX5 and IPX6 waterproof testing machine is also known as IP waterproof testing equipment. Handheld water sprayers, flushing testing machines, etc. are an open waterproof...
What is a Glow Wire Test? The glow wire test is to test the stability of electronic and electrical products when they are working. The glow...
Introduction Due to the fact that the durability and reliability of electronic devices are directly proportional to their level of water resistance, IP waterproof testing equipment...
I.The principle of high and low temperature test chamber alternating wet and heat test box: Under high and low temperature test chamber, due to the steam...
I. Overview of Temperature and Humidity Measurement Method of High and Low Temperature Humidity Chamber： Electric and electronic products are almost used in various climatic conditions...
What does RoHS refer to? RoHS stands for the Restriction of Hazardous Substances Directive, which was legislated by the European Union and officially implemented on July...
Why should there be IP waterproof grade test? IP waterproof test equipment can also be called as rain test chamber, waterproof detector, waterproof test machine, IP...
Introduction The Glow Wire Test is a standard for measuring the fire safety of electrical and electronic devices. The Glow Wire Test is one example of...
Waterproof testing is mainly aimed at electronic products and equipment that are used outdoors or in harsh environments. It simulates the rainwater environment under different weather...
LISUN’S waterproof test equipment is divided into 1-9 levels of waterproof grade, including IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8, and IPX9 general waterproof grade...
What is the working principle of the water pressure waterproof test Air tightness waterproof test can be divided into many kinds, according to the detection method,...
What is Glow Wire Testing? Glow Wire Testing is used to test the stabilities of electronic and electrical products when in operation. The glow wire itself...
Introduction There is an urgent need for electrical equipment that is resistant to water. It is necessary to have IP waterproof testing equipment in order to...
1. Briefly Interpretation of Cyclic Corrosion Test The cyclic corrosion test method is a newly developed method which can reflect the influence of natural environment exposure...
Introduction When it comes to HVAC (Heating, Ventilation, and Air Conditioning) systems, temperature and humidity chambers are essential for development and testing. Manufacturers and researchers may...
The working principle of the salt spray chamber: Corrosion is the damage or deterioration caused by the action of the environment on a material or its...
1. How to Purchase Waterproof Test Equipment Waterproof test equipment refers to instruments capable of carrying out various waterproof performance tests, including pressure testing, performance testing,...
Introduction The Glow Wire Test apparatus is a flexible instrument for testing the fire safety of a wide range of electrical and electronic items. It has...
High and low temperature chambers are a type of environmental test chamber and widely used in various tests. It contains many kinds of products and is...
Salt is a ubiquitous compound, which not only exists in the ocean, atmosphere, land surface, lakes and rivers, but also causes machinery or electronic products to...
Waterproof tester, also known as rain test boxes, rain testing machines, etc., is used to test the waterproof performance of appliances or appliances with rainproof functions....
The Waterproof Test System is mainly used for waterproof testing or sealing testing of complete electronic products or components. Using compressed air for testing is a...
Introduction As more and more of our daily lives revolve on electrical gadgets, it’s more important than ever to keep them safe against water damage. It...
Introduction The testing of new building materials often requires exposure to a range of temperatures and humidity levels. The performance, durability, and adaptability of building materials...
Salt spray test chamber is also called salt spray testing machine, which is called salt spray testing machine in full, and is mainly used to test...
Introduction The corrosion resistance of materials and coatings may be evaluated using a variety of methods, two of the most common of which being salt spray...
Introduction When it comes to ensuring the reliability and safety of electrical and electronic products, certifications and compliance play a critical role in meeting applicable standards....
The Temperature Humidity Chamber is a kind of humidity testing equipment , used to test the range of material structure and composite materials that can be...
High and low temperature chambers are widely used in various industries such as electronics, electronics, aviation, chemical, military, etc. However, the testing requirements for products in...
High Low Temperature Testing Test Chamber Intermittent Wet and Hot Test Box is a special sealed test box. The correct use of the device can not...
Introduction When it comes to electronics, liquid damage is a major concern that may compromise their performance and lifespan. Manufacturers use IP waterproof testing to determine...
Introduction In the automobile sector, where the dependability and performance of cars and their components are of the highest significance, temperature humidity chambers play a key...
Waterproof testing is used to verify the effectiveness of protective covers, shells, and sealing washers that prevent water from penetrating the product; Check the ability of...
ROHs Compliance Testing refers to the testing of harmful substances in electronic and electrical products to ensure that the products meet the requirements of the EU...
The Glow-wire Tester is used to test the stability of electronic and electrical products during operation, and the flame retardant performance of electronic products in the...
Introduction Testing and developing electrical products is impossible without environmental chambers. Electronic equipment is tested in specialized chambers that can reproduce a wide range of environmental...
Introduction In today’s technologically advanced society, electronic gadgets are ubiquitous and deeply ingrained in our everyday lives. As our reliance on electronic devices continues to grow,...
Introduction The Glow Wire Test gadget is a cutting-edge piece of apparatus that is used in the process of determining whether electrical and electronic products are...
Durability and dependability of products under extreme circumstances is a top priority in the field of product testing. Products, from electronics and automobile parts to outdoor...
Introduction Manufacturers in today’s fast-paced industry are under increased scrutiny to guarantee that their wares are long-lasting and risk-free for consumers. The impact resistance of items...
The application field of Temperature Humidity Chamber is very wide, so the established good market demand has great development space in the environmental test equipment industry....
Introduction: The protection offered by electrical and electronic goods is of the highest significance. In order to provide assurance that the objects are resistant to fire,...
Introduction The rapid development of technology has made electronic gadgets indispensable to modern living. We depend significantly on technology like smartphones, tablets, wearables, and smart home...
To simulate a range of environmental conditions, including those involving temperature and humidity, temperature humidity chambers are a subset of environmental chambers used for testing and...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
The Swing Ppe Water Spray Test Equipment is divided into three types: ipx34 shower rain tester, open type and box type. The spray nozzle uses special...
For now, there are more and more places where we use LED lights in our lives. LED is a light-emitting diode semiconductor device. Its working principle...
The test principle of the high and low temperature chamber has the tendency to simulate and simulate the temperature change in the natural environment. It is...
PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES Part 1:Scope This part of IEC 60884 applies to plugs and fixed or portable socket-outlets for a.c. only,...
IP (Ingress Protection) protection grade system is drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION), which classifies electrical appliances according to their dust-proof and moisture-proof characteristics. The IP...
The high and low temperature test chamber is suitable for environmental simulation reliability tests such as high and low temperature constant and gradual changes, damp heat...
Precautions when purchasing the high and low temperature test chamber: 1. Before understanding the high and low temperature chamber, we should first understand the needs of...
1. Cleaning and maintenance inside and outside the Temperature Humidity Chamber ①. Before the high and low temperature test, the internal impurities must be removed. ②....
The WS Series Temperature Rise Tester fully complies with the requirements of IEC 60884-1 Clause 19 (GB/T 2099.1 Clause 19); IEC 60669-1 Clause 17 (GB 16915.1...
What is the waterproof jet test device? The waterproof jet test device can also be called IPX56 test device, hand-held water sprayer, flushing test machine, etc....
The High and Low Temperature Humidity Chamber is a kind of testing mechanical instrument used to test the extent of endurance of material structure and composite...
Waterproof test equipments is used to test the waterproof performance of appliances or appliances with rain-proof function, so that the product may be exposed to water...
In fact, one of the factors affecting the test results of the high and low temperature chamber is the sealing of the equipment. It can be...
Waterproof test equipments, also known as rain test box, rain test machine, etc., is used to test the waterproof performance of appliances or appliances with rain-proof...
If the high and low temperature humidity chamber uses ordinary water humidification particles, it will be relatively large. The humidity sensors of the equipment are more...
The core component of the compressor in the refrigeration system is the core component of the high and low temperature chamber, which plays a decisive role...
Accidents such as natural disasters have gradually entered our lives, such as floods, mudslides, heavy rains, and other natural disasters may occur around us. For such...
IPX7 immersion tank waterproof test device is divided into two types, one is stainless steel immersion test device 1; One is a glass-type immersion test device...
When the high and low temperature chamber is in the low temperature state, different test materials will have different physical shrinkage phenomena, which may make the...
What is the waterproof grade of IPX34 Swing Pipe Water Spray Test Equipment: IPX3 Swing Pipe Water Spray Test Equipment : spray holes are arranged in...
Waterproof test equipment, also known as rain test box, waterproof test device, rain test machine and other different names, can provide lifelike simulation of electronic equipment...
High and low temperature & humidity test chamber is a common test equipment that simulates the heat dissipation performance, stability performance, power consumption parameters, and estimated...
Waterproof test equipments can also be called as rain test box, ip waterproof testing machine and other names. It uses various detection methods such as simulated...
Waterproof test equipment can also be called waterproof detector, rain test box, waterproof testing machine and other different names. It can provide lifelike simulation of electronic...
Waterproof test machine is to test whether the product has waterproof performance by simulating the performance of electrical components and various products that may be drenched...
IPX5 and IPX6 waterproof test equipments are waterproof tests of two different levels. However, in LISUN, the two waterproof levels are combined into an IPX56 water...
All electronic products need to consider fire risk and potential fire hazards when designing. The design of components, circuits, products, and materials of materials need to...
The waterproof jet test chamber, as its name implies, is a waterproof test equipment with the appearance of a box type. It is mainly used to...
The IPX7 waterproof test chamber, also known as the immersion test machine, the soaking test box, the IPX7 waterproof equipmen is mainly used to test the...
Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the...
What is the ipx7 waterproof test chamber? The ipx7 waterproof test chamber, also known as the immersion test machine, the waterproof test equipment, the ipx7 waterproof...
Products that have been painted, electroplated, covered with an inorganic or organic layer, handled an anode, treated with anti-rust oil, etc., may be put through their...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
The use of environmental test chambers is very important for the accurate assessment of environmental stress cracking (ESC) in polymers. Environmental stress cracking, also known as...
The drip box consists of a vertical drip tester, an IPX12 drip test chamber, etc. It uses the form of drip to perform IPX1/2 waterproof test...
To detect current leakage and poor or damaged insulation that may cause arc faults, blown circuits, and danger of electrical shock or fire, an insulation resistance...
IPX1 waterproof test operation skills: 1. After plugging in the power switch, press the red button on the operation panel to start the control system; Then...
Thermal testing is carried out in a thermal chamber, also known as an environmental test chamber. The testing is carried out using convection. The main purpose...
A salt spray chamber is a useful piece of machinery to evaluate how well a substance or coating holds up against corrosion. The instrument is often...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
To ensure their goods can withstand even the most extreme circumstances, manufacturers often use a humidity chamber, a special device that simulates a variety of humid...
IPX12 drip tester has many names, such as rain drop testing instrument, rain drop testing machine, etc. The frame of IPX12 drip tester is composed of...
The glow wire test apparatus investigates the fire-resistant properties of raw materials and finished components. LISUN’s glow wire test equipment has been ergonomically designed to meet...
IP grade waterproof testing instrument is a grading standard of IP waterproof testing equipment, which is used to determine whether the IP waterproof of products meets...
IPX56 waterproof jet test device is composed of chassis and turntable, which can be placed separately, and movable casters are installed at the bottom of chassis...
The glow wire test is a physical experiment. The purpose is to test the stability of electronic and electrical products at work. The glow-wire tester heats...
IK ratings are defined as IKXX, where “XX“ is a number from 00 to 10 indicating the degrees of protection provided by enclosures (including luminaires) against external mechanical...
I、 Purpose of environmental test The environmental test examines the adaptability of the product to the environment, determines whether the environmental adaptability design of the product...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
The salt spray test standard specifies the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value, and also puts forward...
Needle flame test and glow wire test test description Needle flame test and glow wire test are both tests used in the electrical and electronic product...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber, Environmental test chambers are according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
I. Salt spray test chamber| Salt spray testing simulates a corrosive salty environment in the laboratory. It is used to speed the testing of surface coatings’...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
A unique testing tool used in laboratories is the tracking test device. The Tracking test device is used to gauge a surface’s resistance to a leakage...
As a type of reliability test equipment, environmental test has developed into a method to predict how the product use environment affects the performance and function....
A humidity chamber often referred to as a temperature and humidity chamber , is appropriate for testing products like electrical equipment, home appliances, food, trolleys, vulcanized...
What is Ingress Protection testing? An enclosed product’s resistance to liquid and particle infiltration is assessed during ingress protection testing. Depending on the achieved resistance to...
Worldwide, enclosures and control cabinets are utilized in a variety of settings and must adhere to the tightest safety standards. A crucial role is played in...
The high and low temperature test chamber is a common test equipment for simulating the heat dissipation performance, stability performance, power consumption parameters and estimating the...
Salt spray test is a clear and specific regulation of salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH value. In...
What is an Environmental Chamber? An Environmental Chamber, also known as a climate chamber or a climatic chamber, is an efficient method to test how sensor...
Environmental Chamber (GDJS-015B) LISUN’s climate testing chamber or environmental chamber is a sealed space where the temperature and humidity may be adjusted as needed. This device’s...
The salt spray corrosion test chamber measures the product’s resistance to salt spray corrosion as well as the material’s and its protective layer’s salt spray corrosion...
The LISUN IP waterproof test machine is widely used in the authentication test organization for products such as electrical & electronic products, and LED luminaires as...
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
A salt spray test or salt fog test is a corrosion method for checking the corrosion resistance of the materials and coatings of the surface. The...
Environmental test equipment is the general name of all test chambers simulating natural climate environment. Representative products include salt spray test chamber, high and low temperature...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
Environmental test chamber is a necessary equipment for enterprises engaged in the production of electronic products. It can test and test electronic products and is an...
The most of luminaires manufacturers are requested to do IK level test (Impact Protection). LISUN can supply the IK test instrument: IEC62262 Impact Protection Tester |...
How Does Test Chambers Work? Different systems are used in test chambers to create and maintain the ambient conditions depending on their intended use. Since they...
The test to evaluate and analyze the reliability of electronic products is called reliability test Reliability test is an activity to evaluate the functional reliability of...
What Does Salt Spray Testing Mean? An accelerated corrosion test called the salt spray test is used to compare the corrosion resistance of materials that have...
What is Climate Chamber? Climate chambers is used to simulate a temperature enviromental condistions, it may also be called environmental chamber or Thermal Chamber or Temperature Chamber....
By evaluating the degree of protection given against mechanical incursion, dust, accidental touch, and water into casings and enclosures, ingress protection (IP) testing lowers the risk...
What is an Environmental Test Chamber? LISUN has been building the most recognizable environmental testing equipment in the industry. Every chamber sold is highly recommended in...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
There are multiple methods for the evaluation of flammability and fire resistance of the material. They are usually direct flame and indirect flame methods. ”Direct Flame...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
There is no doubt that safety is a paramount concern in any industry. That’s why at LISUN, we focus on ensuring the highest level of safety...
IEC 62262 IK protection test means that electrical equipment housings are protected against external mechanical collisions, and the IK standard applies to rated voltages not exceeding...
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < basic testing methods of Glow wire, basic testing...
LISUN’s Salt spray test chamber The Salt spray test Chamber is used to conduct salt spray corrosive tests on components, parts, electronic and electrical components, metal...
Environmental Chamber An Environmental Chamber is defined as an enclosed space where environmental conditions such as temperature and humidity can be controlled. Some chambers are also...
What is a Salt Spray Test? The salt spray test is a generalized test method used to check the coated samples’ corrosion resistance. During the salt...
What is a Water proof test? Waterproof is the ability of any material to resist water and moisture. To be classified as waterproof, the material should...
Most electronic and other device manufacturers use the IP (Ingress Protection) scale, which ranges from 1 to 8. IPX1 is the lowest level of waterproofing, indicating...
What Instrument can be used for testing impact of environment on different products? The Salt Spray Test Chamber is a piece of environmental testing equipment that...
What is an Environmental Chamber? An environmental chamber, also known as the climatic chamber or environmental test chamber, is an enclosed space for testing the effects...
What is the function of Environmental Chambers? Temperature, humidity, air pressure, light, and motion can affect the performance of a product. The environmental chamber can be...
What is a ball pressure test? Under the action of high temperature, the structural properties of non-metallic materials and insulating materials will change greatly, and this...
What is the glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for providing resistance to abnormal heat and fire tests on the lighting lamps,...
Security is critical in the home appliance business. The purpose of fire safety rules is to assess and rate the flammability of materials used in appliance...
Introduction An environmental chamber, also known as a climate test chamber, is an enclosed area in which the temperature and humidity conditions can be modified as...
Salt Spray Test Chamber Introduction The Salt Spray Test Chamber applies to the salt spray corrosion test to protect layers of the components, parts, electronic and...
Technology is improving with growing demands. New equipment is introduced in the market to fulfil these changing needs. One such instrument is the Environmental Chamber. It...
There are a number of corrosion tests that may be used to determine the long-term durability of protective coatings. However, the focus of this article is...
As more and more household appliances enter our daily life, and people use these electrical products more frequently, this requires that in addition to the design...
Salt spray test chambers is that your fasteners are put in, you rely on their endurance and want them to remain serviceable at all times. When...
What is the LED test standard？ Semiconductor light-emitting diode (LED) is a new type of light-emitting body, with high electro-optical efficiency, small size, long life, low...
Metal components, zinc plated nuts and bolts, surface coatings, and paint may be tested for corrosion resistance in salt spray test chambers or salt fog chambers....
It is possible to test the reaction of goods when they are exposed to fluctuations in humidity by using a humidity chamber. This chamber is also...
Uncontrolled environmental conditions, such as temperature and humidity, may be achieved in an Environmental Chamber, which is an enclosed chamber. By delivering salt spray within the...
In the field of environmental testing, and the environmental chamber is a device that enables users to manipulate the ambient conditions in an enclosed space to...
The reason why LED lighting is easy to spread the flame inside the equipment insulation material or other solid combustible material parts may be ignited by...
The International Electrotechnical Commission (IEC) created the IEC 60068 standard, which is widely accepted throughout the world. Environmental testing for electronic equipment, components, and electromechanical products...
Climate chambers are enclosed spaces used to evaluate the impact of certain environmental conditions on biological things, industrial goods, materials, and electrical devices and components. Environmental...
The high and low temperature humidity environmental chamber is a test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc., used to test...
Salt spray test is a kind of environmental reliability test, mainly used to test the corrosion resistance of metal materials of lamps. In order to verify...
IP (International Protection) protection level is the dust and water protection level of the product shell specified by the International Electrical Association (IEC). The requirements for...
The high and low temperature environmental test chamber is also called the high and low temperature cycle test, which is one of the product environmental reliability...
The high and low temperature environmental chamber is formed by CNC machine tools, the humidification system pipeline is separated from the control circuit board, and the...
The salt spray test chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other...
The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food,...
The salt spray test is divided into two categories, one is the natural environment exposure test, and the other is the artificial accelerated simulated salt spray...
The main purpose: The Glow Wire Tester/Glow Wire Test device is used to detect the thermal stress caused by heat sources or ignition sources such as...
The salt spray chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other anti-corrosion...
Introduction: The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances,...
Temperature, humidity, and other environmental factors may be regulated in an Environmental Chamber. Corrosion may be simulated in certain chambers by spraying salt into the room....
An environmental chamber’s job is to find out how a product will perform in various climatic, physical, and other unusual circumstances. When a product is being...
Expert equipment for environmental testing, semi-conductive testing, chemical stability tests, and more is a temperature test chamber. The size of an environmental chamber temperature test chamber...
The walk-in environmental chamber is intended to determine the characteristics of your goods to deal with external conditions such as heat, cold, dryness, moisture, etc. The...
Introduction of glow-wire tester: The glow-wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such as hot...
Application: The salt spray test machine is suitable for the surface treatment of various materials, including paint, electroplating, organic and inorganic film, anode treatment, anti-rust oil,...
Environmental chamber is the general name of all test chambers that simulate natural climate environment. The representative products include salt spray test chamber, high and low...
Introduction to Glow Wire Tester: The glow wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such...
Test method of salt spray test chamber • First power on the salt spray test chamber (plug in) • Press the red power switch, the salt...
The high and low temperature humidity chamber, as its name implies is the experimental equipment that performs high and low temperatures on the product. The production...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
1. Introduction: The salt spray corrosion test equipment meets and applies to the standard GB/T2423.17-2008 for salt spray test of electrical and electronic products promulgated by...
The Salt Spray Test Chamber is an environmental test equipment that evaluates the corrosion resistance of products or metal materials by artificially simulating salt spray environmental...
To verify whether the metal parts on the product will corrode when exposed to the atmosphere or other environments, the product can be placed in the...
The Salt Spray Test Chamber can be used to evaluate the salt spray corrosion resistance of materials and their protective coatings, compare the process quality of...
The full name of IEC60112-2009 is <Method for the determination of the proof and the comparative tracking indices of solid insulating materials>. It has been prepared...
The full name of IEC 60068-2-11-3.1 is <Basic environment testing procedures Part 2: Tests Test Ka: Salt mist>. It is edited by the IEC technical committee...
The full name of IEC 60695-2-10-1 is Glow/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is...
Many customers have purchased LISUN GDJS Walk-in environmental chamber , but they will not use them frequently after purchase. It often needs to be idle for...
ISO is the worldwide union of national standards. The international standard ISO 9227 has been developed by the ISO/TC 156 Metals and Alloys Corrosion Technical Committee....
Introduction: The TTC-1 Tracking Test Chamber which used for determining the degree of protection against formation of conducting paths in solid insulating materials, due to the...
Glow Wire Test introduction: The glow wire testing uses simulation technology to assess the fire hazard of thermal stress caused by heat sources such as hot...
The test requirements for the IP level test of road vehicles lamps mainly refers to ISO20653, DIN 40050-9, and ISO12103, which defines the IP level, test...
High and low temperature and humidity controlled chambers GDJS Series is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
The environmental conditions test standard for automotive exterior lighting and optical signal devices is ISO16750 <Road vehicles-Environmental conditions and testing for electrical and electronic equipment>, IEC60068-2,...
As more and more household appliances enter our daily lives, and peoples frequently use these electrical products, it required household appliances not only need meet users...
Introduction of waterproof test system: The waterproof test system includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page...
Introduction for the High and Low temperature humidity Chamber: High and Low temperature humidity Chamber adopts imported special man-machine interface temperature and humidity controller, which is...
The glow wire test is to test the stability of electronic and electrical products at work. The glow wire itself is actually a fixed-size resistance wire...
Forehead thermometers is both medical product and electronic product. It only needs one or two seconds to complete a body temperature measurement, which is very suitable...
The full name of IEC 60068-2-75 is Environmental testing-Part 2-75: Tests- Test Eh: Hammer tests. It has been prepared by IEC technical committee 104:Environmental conditions, classification...
The full name of IEC 60068-2-1 is Environmental Testing Part 2-1: Tests-Test A: Cold. It is edited by the IEC technical committee in 2008.We will introduce...
LISUN GDJS seriesHigh and Low Constant temperature and humidity chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
Waterproof testing grade reflects the ability of moisture-proof of products. Especially for outdoor activities, it is unavoidable to be in the harsh environment of high humidity....
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
In general, LED can be used for more than 50000 hours, and some manufacturers are promoting their LED to operate for about 100000 hours. The main...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
The Hong Kong International Lighting Fair has become the largest industry exhibition in Asia, and the second largest in the world. LISUN participates this exhibition every...
HKTDC Hong Kong International Lighting Fair (Autumn Edition) 2017, organized by the Hong Kong Trade Development Council at the Hong Kong Convention and Exhibition Centre (HKCEC)...
Istanbul Light is an international platform, where all the players in the lighting industry come together under a same roof and where the latest technologies and...
In September and October 2013, Chairman Xi put forward a major initiative of building “The Silk Road Economic Belt” and “The 21st Century Maritime Silk Road” (referred to...
High Low temperature and humidity test chamber is used to simulate a actual temperature and humidity environment which it may caused any influence for surrounding objects....
In natural environment, temperature and humidity are two indivisible natural factors. Due to different geographical locations in different regions, the temperature and humidity effects generated are...
In recent years, many manufacturers are planning to manufacture common global LED drive products with a wide voltage input. But since different countries have different product...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
IEC 62262 (How to install the EUT when doing the IK degree protection test, ventilation requirements, quantity of hammer, distribution of the hammer and hammer each...
LVD’s goal is to ensure the safety usage of low-voltage equipment. Its range of application is on electrical products with voltage at 50V to 1000V AC...
Nowadays, with the development of LED industry, its technology continues to be mature and has widely applied at home and abroad. Comparing to mature markets in...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
India lighting market develops rapidly, research reports point that LED lighting market scale will reach 1.14 billion dollars, growth 47.1%. India government intends to make India...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
IESNA-LM-80 (Measuring Lumen Maintenance of LED Light sources) is an approved method by Lighting Engineering Association of North America (IESNA) for the third generation SSL products;...
LED has the features of long life, but with the different working condition and drive current, its life will be different, but generally the life will...
At the end of October 2016, Lisun attended lighting fair in as in previous years. Hongkong International Lighting Fair has been an ideal platform for LED...
In October 5th-7th 2016, New Delhi LED lighting exhibition held in New Delhi, the capital of India. As one of India’s largest LED lighting exhibition, New...
Under the effect of high temperatures, the structural characteristics of non-metallic materials, insulation materials will change greatly, which manifests itself softened or melted. Ball pressure test...
Lisun will come with professional technical team to attend 2016 Germany Frankfurt Lighting Fair( Light + Building) dated on 13th Mach ~18th March, 2016. This time...
Glow wire test is to test the stability of electrical and electronic products during working. And the hot wire itself is the resistance wire ring with...
IEC 60529 (GB4208-2008) IP code is a coding system to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of...
The 2015 New Delhi Autumn LED Expo was successfully held during 3th December~5th December. As one of India biggest exhibition, this exhibition main relate different lighting...
It is the second time we have attended the fair, and it is a successful and wonderful fair. Lisun’s booth attracks numerous people’s visit.
During the exhibition, Lisun showed its main instruments which attracted many customers to stop and talk. Among them, there are not only many old customers hope...
USA Environmental Protection Agency(EPA) and Department of Energy(DOE) successively released Energy Star and Lighting Facts Standards for LED Luminaires/Bulb from 2010, which makes relevant industry persons...
As in previous year, Lisun and its instruments appeared at booth ED-A01 of Hong Kong International Lighting Fair (Autumn Edition) during 27th October to 30th October....
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
