IEC 60745-1:2006 Hand-held motor-operated electric tools – Safety – Part 1: General requirements

IEC 60745-1:2006 is a pivotal standard that details the safety requirements for hand-held motor-operated electric tools. Applicable to tools with single-phase AC/DC voltage up to 250V and three-phase AC voltage up to 440V, it encompasses a wide range of devices used under normal conditions and those subject to reasonably foreseeable misuse. The standard takes aim at preventing various hazards like electrical shocks, mechanical failures, and overheating, and it also includes specific provisions for tools with electric heating elements, battery-powered models, and those mountable on fixed supports.

This standard incorporates a comprehensive set of safety provisions. It requires stringent electrical insulation and dielectric strength tests to guard against electric shocks, while also ensuring mechanical durability to endure impacts and vibrations. Thermal protection measures are implemented to avoid overheating issues, and there are stipulations for electromagnetic compatibility. Additionally, it covers marking, labeling, and user instruction requirements, along with a series of detailed testing procedures to confirm that all safety aspects are met, thereby providing a robust safety framework for these electric tools.

LISUN supplies the fully test solutions for the following IEC 60745-1:2006, please see the below excel table:

IEC 60745-1:2006 Clause and Subject	LISUN MODEL
8.1 IP number according to degree of protection against ingress of water	JL-X
21.20 IP System
9.3 Test Figure 1	SMT-PB
9.4 Test Figure 2	SMT-1213
12 Heating-Temperature Rise	WS-1
14 Moisture resistance	GDJS-015B
Annex I 17 Endurance test apparatus
15 HV-test facilities	SG61000-5
20.2 spring-operated impact test apparatus	IK01-06
23.1.4 Isolation Transformer	ITEU-SP4K
23.1.11 Switch tests of Clause 17 of IEC 61058-1.	CZKS-3
24.13 Flexing test apparatus	WDT-B42
28 Creepage distances, clearances and distances through insulation	CK-1
29.1 Ball pressure test	ZBP-T
29.2 Glow wire test	ZRS-3H
29.3 NeedLe Flame Test and tracking test	ZY-3&TTC-1
30 Resistance to rusting	YWX/Q-010

Tags：CK-1 , CZKS-3 , GDJS-015B , IK01-06 , ITEU-SP4K , JL-X , SG61000-5 , SMT-1213 , SMT-PB , TTC-1 , WDT-B42 , WS-1 , YWX/Q-010 , ZBP-T , ZRS-3H , ZY-3