UV aging test chamber is suitable for the aging test of non-metallic materials resistant to sunlight and artificial light. Light source adopts eight UV fluorescent lamps that rated power is 400W as a light source. UV fluorescent tubes are distributed on sides of chamber, every side has four (There are UVA-340 and UVB-313 light source for users to select the configuration). UV aging test chamber is...
The CV model load is the basic of the LED power supply test. CV is constant voltage, but the load is only the current load equipment, itself does not provide constant voltage, therefore, the so-called CV is just through the voltage negative feedback circuit, to servo the change of LED power supply output current, to make the LED output capacitor charge balance, thus achieve the purpose of constant...
Glow wire test is to test the stability of electrical and electronic products during working. And the hot wire itself is the resistance wire ring with fixed size. When doing test, the wire ring should be heated up to the specified temperature by electricity, so that the time when the top of the wire reached the sample can meet the time standard required, then observe and measure its state. The tes...
IEC 60529 (GB4208-2008) IP code is a coding system to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of solid foreign objects, ingress of water and to give additional information in connection with such protection IP code includes 4 digits, like IP23CH. IP short for ingress protection; numeral 2 stands for first characteristics and can be ins...
Power supply is the device to change other forms of energy in to electric energy. Power supply products are widely applied in industry automation control, military equipment, scientific equipment, industrial equipment, computers, communications equipment, electrical equipment, instruments, medical equipment, semiconductor refrigeration and heat and other fields. There are two common types of major...
According to CIE, EN and LM-79(Clause 9.1) etc standards, spectroradiometer integrating sphere system is used for all kinds of light source photometry parameters test. The following introduces Lisun several different spectrometers’ characteristics and applications briefly. LMS-9000A/LMS-9000B High precision CCD spectroradiometer. LMS-9000A is mainly used for LED light source test. Test datas me...
1. According to the reflectivity of the internal coating: How to choose integrating sphere Note: It can select the coating according to the test requirement, the default is the BaSO4 coating. 2. According to the test method: We don’t discuss both the integrating sphere and goniophotometer here, we only talk about integrating sphere optics. How to choose integrating sphere Specification: The abov...
LED coated with phosphor powder on the LED chip to achieve white light emission. There are three main methods to realize white light with phosphor powder, but they are not completely matured. So the application of LED in the field of illumination is seriously affected by LED. Specifically, the first method is applied to the blue LED chip which can be excited by the yellow phosphor blue light, the ...
As well as we know that for the LED luminaires lumen test, the CIE121: 1996 Clause 6.1, CIE127-2007 Clause 6.2 and IES-LM-79-08 Clause 9.0 are mentioned two luminous flux test method: the first is adoption integrating sphere+photometer or spectrometer(recommend by CIE121: 1966 Clause 6.1.1, CIE127-2007 Clause 6.2.and IES-LM-79-08 Clause 9.0), this kind of test method is relative measurement method...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語