IEC 60825-1: 2007 is a standard issued by the European Union, applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. Its scope of application would be only applied to LASER products after September 2010, and LED lighting products are no longer covered by the latest version of IEC / EN 60825-1, but need to be assessed in accordance with IEC / EN 6247...
Spectrum is the relative distribution of wavelength and light intensity. The spectrum of LED is generally monochromatic LED, such as blue LED with a peak wavelength of 470nm, with shorter peak wavelength ultraviolet area and with longer peak wavelength green areas as the determination limitation of light intensity. And the spectrum of incandescent lamp, its luminous intensity is widely distributed...
In order to meet the demands of the lighting market for handle spectrometer, Lisun launches LMS-6000 Portable CCD Spectrometer recently. Compare with Lisun CHROMA-2 Pocket Chroma Meter, LMS-6000 is lighter and easy to carry. Of course, the price is more competitive. LMS-6000 can be inserted SD card to store data, which is easy to use. Let us introduce LMS-6000 briefly. Spectral platform: teleph...
For lighting purpose, the luminaries playing a important role. A good lighting design is achieved by the choice of appropriate luminaires. The nature of the light emitted by the lamp and light control depend on the type of light source, the lamp reflection and the transmitting system and various dimming devices etc. It mainly reflects in the distribution curve of lamps. Light distribution curve is...
There is a wide range of goniophotometers on sale in the market, including central rotation type, rotation mirror type, double mirror type and so on. How to choose the corresponding goniophotometers for the tested lamps becomes the most important problem for the users. This article makes a brief introduction to this knowledge based on LM-79 and EN 13032-1. A-α B-β and C-γ Co-ordinate System A...
The quality of LED driver will influence the life of LED lamp directly. Therefore, we need to control the quality of LED driver strictly. According to IEC62384-2011 and GB/T 24825-2009 DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES – PERFORMANCE REQUIREMENTS. The control gear shall be subjected to a temperature cycling shock test and a supply voltage switching test as follows: a. Temp...
The International Electrotechnical Commission (IEC) has issued IEC 61000-4-2 Ed. 2.0 (2008-12) entitled “Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test.” This standard relates to the immunity requirements and test methods for electrical and electronic equipment subjected to static electricity discharges, from opera...
The Spectroradiometer Integrating Sphere System, there are two important parts: one is measuring and analysis; another is assistant part which providing testing environmental. Here we will discuss the assistant part, we knew that the integrating sphere spherical aggregates, the inner wall of integrating sphere is coated with a highly reflective coating material to the effect of light refraction. H...
With LED development, the traditional fluorescent tubes in the market are gradually being replaced by LED tubes. Currently LED tubes can be divided into three categories: Type A tube: This lamp can replace the fluorescent tube directly without modification; Type B tube: The power supply of this lamp is built-in LED tube, which can connect with city electricity; Type C tube: Use external power supp...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語