LM-79-19 English Version Free Download: Click Here LM-79-19 Spanish Version Free Download: Click Here LM-79-19 Chinese Version Free Download: Click Here This article tries to make a comparative evaluation between ANSI/IES LM-79-19 Standard that has replaced ANSI/IES LM-79-08 that deals with the methods approved by ANSI/IES regarding performance, requirements technicians of photometric and electri...
There are many customers feedback that their LED luminaires can’t pass CE Certificate EMI Radiation Test (30-300MHz) in 2019 year but it is the same one can be passed last year. Why this happen? The main reason is the new EMI test standard were updated to CISPR15:2018. The EMI Test is the most important and difficult to test for the LED luminaires. This article LISUN engineer will take us to...
As we known the quality of LED lighting products depend on two points: One is LED chip(light source); Second is LED power driver. In the practice, there only have few company can provide qualified LED chip such as PHILIPS, OSRAM and CREE in the market. Generally, the LED chip have very small change to get quality problem, but we heard many news about low quality LED lighting products was found and...
HID lamp is high intensity discharge lamp. High pressure sodium lamp, high pressure mercury lamp, xenon lamp, metal halide lamp are all belong to HID lamp. We generally use Integrating Sphere Spectroradiometer Test System to test the photometric, colorimetric and electrometric parameters. Generally we suggest the diameter size of Integrating Sphere according to the size of lamp under test. If yo...
When doing IEC 61000-4-4 EFT immunity test, there are L1, L2, L3, N and PE interface. PE and earth are two different concepts. Electrical fast pulse interference is common mode, in the experimental setup figure of the standard, we can see the signal cable which is from the test generator can connect with corresponding power lines (L1, L2, L3 , N and PE) through the selectable coupling capacitor, a...
Electromagnetic Compatibility EMC refers to the ability of a device or system to function properly in its electromagnetic environment and does not constitute an electromagnetic disturbance to anything in the environment. Sensor electromagnetic compatibility refers to the adaptability of the sensor in the electromagnetic environment, maintaining its inherent performance and the ability to perform ...
Recently Saudi Arabia released new LED standard SASO 2902 for energy efficiency, functionality and labeling requirements for Lighting products. We have got the SASO 2902 in 2017 which is draft and already produce some instruments for some of the Saudi Lab. Such as below products: 1. LPCE-2(9000) High Precision Spectroradiometer Integrating Sphere System. It can test EEI, Energy Efficiency Clas...
If you need to disable the 64bit digital signature enforcement of the computer, follow the steps: For Win 7 system There are two ways and you can use any of them. Restart the computer and press “F8” at the beginning. Then you can enter “Advanced boot options”. Move the cursor to “Disable Driver Signature Enforcement” and press “Enter”. F...
Some customers suspect the accuracy of the WT2080 because there is some differences of the test result between LISUN WT2080 LED Power Driver Tester and multimeter when testing LED power driver. In fact, the test results are different because the test principle is different: the WT2080 test result is the real effective value (RMS), the multimeter test result is the average value. LISUN WT2080 is ac...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語