The full name of IEC60112-2009 is <Method for the determination of the proof and the comparative tracking indices of solid insulating materials>. It has been prepared by subcommittee 15E: Methods of test, of IEC technical committee 15: Insulating materials.The following is the original content of IEC60112-2009 Principle. The upper surface of the test specimen is supported in an approximately...
The full name of IEC 60068-2-11-3.1 is <Basic environment testing procedures Part 2: Tests Test Ka: Salt mist>. It is edited by the IEC technical committee in 1981. The following is the original content of IEC 60068-2-11-3.1 Test chamber. The chamber for this test shall be constructed of such materials will not influence the corrosive effects of the salt mist. The detailed construction of th...
The full name of IEC 60695-2-10-1 is Glow/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire hazard testing. The following is the original content of IEC60695-2-10 -1 Scope. This part of IEC 60695-2-10-1 specifies the glow-wire apparatus and common test procedure to simulate the effect of thermal stresses which may be ...
The full name of IEC 60695-2-2 is Fire hazard testing Part 2: Test methods – Section 2 Needle-flame test. It was prepared by IEC technical committee 89: Fire hazard testing. The following is the related introduction of IEC 60695-2-2 Scope. This section of IEC 60695-2-2 specifies a needle-flame test to simulate effect of small flames which may result from fault conditions within equipment, in...
The full name of IEC 61000-4-5-2014 is ELECTROMAGNETIC COMPATIBILITY (EMC) –Part 4-5: Testing and measurement techniques Surge immunity test. This part of International Standard has been prepared by subcommittee 77B: High frequency phenomena, and IEC technical Committee 77: Electromagnetic compatibility. The following is the original content of IEC 61000-4-5-2014. This part of IEC 61000 relates ...
The full name of IEC60335-1 is Household and similar electrical appliances-Safety. This part of international standard IEC 60335-1 has been prepared by IEC technical committee 61: Safety of household and similar electrical appliances.The following is the original content of IEC60335-1- General Requirements. Scope This International Standard deals with the safety of electrical appliances for househ...
The full name of IEC 60695-11-3 is Test flames – 500 W flames –Apparatus and confirmational test methods. It has been prepared by IEC technical committee 89: Fire hazard testing. We will introduce the IEC 60695-11-3 4.4.1 Requirements. Requirements A standardized 500 W nominal test flame, according to this method, is one that is produced– using hardware according to Figures A.1 and A.2,– s...
The full name of CIE 177_2007 is Color Rendering of White LED Light Sources. It was prepared by CIE Technical Committee 1-62 of Division 1 “Vision and Colour” and has been approved by the Board of Administration of the Commission Internationale de I’Eclairage for studty and application, Now We will introduce the CIE 177_2007 Summary. This Technical Report reviews the applicability of the ...
Application Field: The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is mainly used to test the corrosion resistance of the samples. At present, it is widely used in the aerospace industry, automotive electronics, electronics and electrical, mobile phone digital, plastic products, metal materials and other industries to test...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語