The EMI receiver is one of the most useful devices to be used in an EMC test chamber in an Electromagnetic Compatibility (EMC) laboratory or engineering facility. EMI problems are frequently encountered throughout the early phases of the product development cycle and measuring receivers of several types are employed to identify and rectify these issues. An EMI receiver is used to perform testing f...
What is goniophotometer definition? LISUN LSG-1890B/LSG-1800A goniophotometer is automatic goniophotometric instrument for luminous intensity distribution measurements with facility for rotating the light source. LISUN LSG-1890B/LSG-1800A uses a constant temperature detector, Japanese motor and German precision angle coder which keep the test results with high accuracy. It is for industrial labora...
What is the function of Environmental Chambers? Temperature, humidity, air pressure, light, and motion can affect the performance of a product. The environmental chamber can be used to observe the performance of a product under certain conditions. It also helps extend product lifetime and examine the aging process. High and Low Temperature Humidity Chamber It is meant to copy a given environment s...
What is an EMI receiver? Electronic noise that interferes with cable transmissions and decreases signal integrity is known as Electromagnetic Interference or an EMI receiver. Electromagnetic radiation sources, such as motors and machines, are common sources of EMI receiver. There are two types of EMI receivers. These are conducted interference and radiated interference. The connection of signals o...
EMI receivers are a very good tool for analyzing EMI spectrums. This article will investigate alternatives such as spectrum analyzers. We will see how LISUN’s EMI receiver fares in the market in terms of standard compliance. EMI receivers EMI receivers are data gathering instruments. These have high performance for analysis. EMI receivers are useful when transient signals or spurious emissi...
Electromagnetic interference is one of the most difficult problems to solve when producing an electronic device. It is also known as EMI. The influence of these inevitable interferences on the instrument’s performance need to be carefully monitored. This is done to comprehend and quantify the electromagnetic compatibility of the instrument under test. Efforts are made to lessen the impact of...
IEC Certified Dust Test Chambers Are Correct Dust Testers Introduction Dust is intrusive contamination that can influence electronics and some other forms of equipment or machinery to overheat and malfunction. The manufacturer can verify their devices can withstand dusty surroundings by becoming well-sealed or undisturbed through such contamination by using the dust tester provided by different Du...
In September 2020, the DLC released the official version of the Grow Light V2.0 standard, which will be implemented on 21st, March, 2021. Prior to this, all DLC applications for plant lights will continue to be reviewed according to the V1.2 standard requirements. The updated content of the official version of the plant lamp V2.0 Keep the requirement of V1.2 version PPE≥1.9μmol/J unchanged In t...
As we all know, UV actually includes 3 bands, from 320nm~400nm, UV-A of low frequency and long wave to 280nm~320nm, UV-B of medium frequency and medium wave, and then to 100nm~280nm, UV-C of high frequency and short wave. Application of UV Light in Different Bands As one of the LED market segments, UV LED can be said to be in its infancy and is expected to have high growth in the future. Correspon...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語