+8618117273997weixin
English
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語
Test Plug for Mechanical Switches on Antenna Coaxial Socket-outlets of IEC 60065 Figure 9
22 Dec, 2023 663 Author: Rachel He

Test Plug for Mechanical Switches on Antenna Coaxial Socket-outlets of IEC 60065 Figure 9

Switches MANUALLY OPERATED MECHANICAL SWITCHES which -control currents exceeding 0,2 A r.m.s. a.c. or d.c., and/or – have voltage across the open switch contacts exceeding 35 V (peak) a.c. or 24 V d.c. shall meet one of the following requirements: a) The switch tested as a separate component, shall comply with the requirements and tests of IEC 61058-1, whereby the following applies: – ...

Read More
12.5mm test probe for the DIN 40050 or IEC 60529
21 Dec, 2023 721 Author: Ellen Liu

12.5mm test probe for the DIN 40050 or IEC 60529

IEC 60529 describes a system for classifying the degrees of protection provided by the enclosures of electrical equipment. Whilst this system is suitable for use with most types of electrical equipment, it should not be assumed that all the listed degrees of protection are applicable to a particular type of equipment. The manufacturer of the equipment should be consulted to determine the degrees o...

Read More
Preventive Measures for High and Low Temperature Test Chamber Testing
21 Dec, 2023 1062 Author: Cherry Shen

Preventive Measures for High and Low Temperature Test Chamber Testing

In order to achieve reproducibility, temperature tests must be designed in such a way that the highest or lowest temperature reached at a certain point in the high and low temperature test chamber is the same, regardless of the laboratory in which the test is conducted. For test designs with a shorter duration compared to the time required for the test sample to reach temperature stability, the fo...

Read More
The Role of EMI Test Receivers in Industrial Automation: Preventing Interference in Manufacturing Processes
21 Dec, 2023 1004 Author: Raza Rabbani

The Role of EMI Test Receivers in Industrial Automation: Preventing Interference in Manufacturing Processes

Introduction Electromagnetic compatibility (EMC) is significant in the field of industrial automation, where continuous production processes are essential for success. Numerous electronic devices coexisting in industrial settings may cause electromagnetic interference (EMI) and interfere with the efficient operation of automated systems. In order to properly evaluate and remedy EMI concerns in ind...

Read More
An Overview of EMI Measurement Equipment for Conducted and Radiated Emission Analysis
20 Dec, 2023 2981 Author: Cherry Shen

An Overview of EMI Measurement Equipment for Conducted and Radiated Emission Analysis

In recent years, with the popularity of electronic devices and the rapid development of wireless communication, the potential harm of electromagnetic field radiation to human health has attracted wide attention. In order to protect people’s health and ensure the normal operation of electronic devices, it has become particularly important to conduct EMI, conducted emission and radiated emissi...

Read More
Analysis of the Meaning and Standard Requirements of High Temperature Pressure Jet Waterproof Test Chamber
20 Dec, 2023 695 Author: Cherry Shen

Analysis of the Meaning and Standard Requirements of High Temperature Pressure Jet Waterproof Test Chamber

The IPx9K High Temperature Pressure Jet Waterproof Test Chamber is a testing equipment that can simulate high-pressure water injection conditions in real environments, used to test the waterproof and sealing performance of electronic devices or automotive components under high-pressure and high-temperature water flow impact. It is composed of nozzles, water pumps, heaters, etc. Among them, IPX9K i...

Read More
UL 2200 Figure 8.3 Probe for Illustrated Film-coated Wire in Generators
20 Dec, 2023 723 Author: Rachel He

UL 2200 Figure 8.3 Probe for Illustrated Film-coated Wire in Generators

8. Protection of Users-Accessibility of Uninsulated Live Parts and Moving Parts-and User Servicing 8.1 The requirements in 8.2-8.17 apply only to low voltage parts that are accessible to the user and are isolated from medium voltage circuits. See 8.18 for requirements for medium voltage parts and low voltage parts that are not isolated from medium voltage circuits. For protection of service person...

Read More
Based on the Goniophotometer: luminous intensity measurement and ies testing
19 Dec, 2023 1237 Author: Cherry Shen

Based on the Goniophotometer: luminous intensity measurement and ies testing

Lighting fixtures play a crucial role in the field of lighting. To ensure the lighting effect and quality of the fixtures, it is necessary to test and evaluate their light intensity distribution. This article will introduce the methods and steps of using a Goniophotometer for luminous intensity measurement and ies testing. A goniophotometer is the main measuring device for testing the photometric ...

Read More
Flammability Test Apparatus, Burning Tests, and Flammability Tests: Comprehensive Fire Safety Assessment Tools
19 Dec, 2023 1991 Author: Ellen Liu

Flammability Test Apparatus, Burning Tests, and Flammability Tests: Comprehensive Fire Safety Assessment Tools

With the increasing number of incidents of interior material combustion in cars, ensuring the safety of the interior has become an important issue. This article introduces an advanced Flammability Test Apparatus for Burning Tests and Flammability Tests to ensure the safety and reliability of automotive interior materials. In recent years, incidents of interior material combustion in cars have occu...

Read More