Product No: PFS-80V100A
The PFS-80V100A Automotive Power Fail Simulator | Voltage Micro-interruption Generator is a product specially developed and produced to meet the wiring harness interruption (micro-interruption) test of power lines and signal lines. It simulates the interruption, plugging and unplugging of power lines and signal lines, and determines a common and reproducible evaluation basis.
Standard:
ISO16750-2-2023, IEC 62132-2 , IEC/EN 61000-4-20 , ISO 7637-2，BMW GS 95003-2, Chrylser CS-11979, Fiat 9.90110, Ford EMC-CS-2009.1, GMW 3172, Hyundai Kia ES 95400-10, Hyundai Kia ES 96100-02, IVECO 16-2103, Mack Trucks 606GS15, Mitsubishi ES-X82010, PSA B21 7110, Volvo STD 515-003, Ford FMC 1278, BMW GS 95024-2-2, Jaguar JLR-EMC-CS, Tesla TS-0000425-05.
Application:
Electrical performance testing of vehicle electronics; it can meet the test requirements of 12V/24V/48V system at the same time.
Characteristic:
• Can be controlled by the software
• Can cooperate with (0-80V) DC power supply to achieve test purposes;
• Breaking the waveform time to edit freely;
• High integration dual module combination;
• The signal line module can adapt to high -speed communication;
• The minimum drop time can be set 1µs;
Power Line Fail Test Interface
Communication Line Fail Test Interface
Specification:
| Interference Type | Simulation power cable interruption, short circuit, insertion and other industrial conditions; |
| Power Cord Switch： | |
| Power Switch | 2 road switch: -DC+ power cord; -DC-ground wire |
| EUT Voltage | ±80V |
| EUT Max. Current | 100A |
| S2 Leakage Resistance | Open circuit, 0Ω, 0.1Ω, 1Ω, 100Ω |
| Current Direction | Unidirectional |
| Switching Time | ＜200ns |
| Rising Edge/Decrease Edge | Realize the upper and lower edges of 200ns under the open circuit |
| Peak Current | 400 A for 200 ms 1350 A for 1 ms |
| Automatic switch-off if I > 1,350 A | |
| Interruption Time | 1μs~60s |
| Calibration Parts | Optional |
| Signal Wire Switch: | |
| Number of Channels | 16 independent channels can be switched to each other |
| EUT Power Supply | ±50V DC/5A |
| Switching Type | Automatic switch |
| Test Mode | Support single roads, multi -road tests at the same time |
| Interruption time | 1μs~60s |
| Rising/down edge | 100Ω load up and down and also full meet <200ns at the same time |
| Safety | Short -circuit protection function |
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語