+8618117273997weixin
English
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語

Automotive Power Fail Simulator | Voltage Micro-interruption Generator

Product No: PFS-80V100A

Leave a Message

=
  • Description
  • The PFS-80V100A Automotive Power Fail Simulator | Voltage Micro-interruption Generator is a product that specializes in the testing and production of wire beam interruption (micro-interrupt) testing of the power line and signal line. Simulation power cords and signal cables are interrupted, inserted, and other conditions, and confirm a common evaluation basis.

    Standard:
    ISO16750-2-2023, IEC 62132-2 , IEC/EN 61000-4-20 , ISO 7637-2,BMW GS 95003-2, Chrylser CS-11979, Fiat 9.90110, Ford EMC-CS-2009.1, GMW 3172, Hyundai Kia ES 95400-10, Hyundai Kia ES 96100-02, IVECO 16-2103, Mack Trucks 606GS15, Mitsubishi ES-X82010, PSA B21 7110, Volvo STD 515-003, Ford FMC 1278, BMW GS 95024-2-2, Jaguar JLR-EMC-CS, Tesla TS-0000425-05.

    Application field:
    Electrical performance testing of vehicle electronics; it can meet the test requirements of 12V/24V/48V system at the same time.

    Technical characteristics:
    • Can be controlled by the software
    • Can cooperate with (0-80V) DC power supply to achieve test purposes;
    • Breaking the waveform time to edit freely;
    • High integration dual module combination;
    • The signal line module can adapt to high -speed communication;
    • The minimum drop time can be set 1µs;

     

     

    Power Line Fail Test Interface

    Communication Line Fail Test Interface

    Technical specification:

    Interference type Simulation power cable interruption, short circuit, insertion and other industrial conditions;
    Power cord switch:
    Power Switch 2 road switch: -DC+ power cord; -DC-ground wire
    EUT Voltage ±80V
    EUT Max. Current 100A
    S2 leakage resistance Open circuit、0Ω、0.1Ω、1Ω、100Ω
    Current Direction unidirectional
    Switching time <200ns
    Rising edge/decrease edge Realize the upper and lower edges of 200ns under the open circuit
    Peak current 400 A for 200 ms 1,350 A for 1 ms 
    automatic switch-off if I > 1,350 A
    Interruption time 1μs~60s
    Calibration parts Optional
    Signal wire switch:
    Number of channels 16 independent channels can be switched to each other
    EUT Power Supply ±50V DC/5A
    Switching Type Automatic switch
    Test Mode Support single roads, multi -road tests at the same time
    Interruption time 1μs~60s
    Rising/down edge 100Ω load up and down and also full meet <200ns at the same time
    Safety Short -circuit protection function
    Tags: