Introduction: When evaluating electronic components for performance and reliability, electrostatic discharge (ESD) guns are necessary. Keeping your ESD gun in tip-top shape is essential for getting reliable readings time after time. In this article, we’ll go over some best practices for ESD gun maintenance and care, touching on some of the most important aspects to keep in mind if you want y...
The static electricity generator is a generator for giving static electricity to objects. When used, it is required to be grounded to the ground, otherwise it will easily affect the emission effect. The most widely used in our life now is the fusing spray cloth machine, which uses the principle of giving static electricity of the static electricity generator to make masks. I. Working principle of ...
Introduction: To guarantee the electromagnetic compatibility (EMC) of electronic devices and systems, EMI testing is essential. The manual testing process is increasingly inefficient and time-consuming due to the growing complexity and variety of electrical items. However, modern EMI test receivers are equipped with automated testing and data processing features, greatly simplifying the testing pr...
The Xenon Aging Test Chamber is a comprehensive climate aging test device that utilizes a Xenon arc lamp to enhance material degradation tests of light energy, temperature, and humidity, simulating the full spectrum of sunlight. It is widely used in scientific research and product development, quality control and selection, and the improvement of new durable materials, covering plastics, rubber, p...
Introduction The Glow Wire Test device is an essential piece of equipment for conducting fire safety tests on a wide range of materials. The capabilities and effectiveness of Glow Wire Test equipment have been greatly improved because of technological developments over the years, allowing for more precise and trustworthy test results. The purpose of this research is to investigate the way in whi...
I. Working Principle of Each Component of High and Low Temperature Constant Temperature Chamber The cooling system of high and low temperature test box is one of the important parts of the comprehensive high and low temperature chamber. Generally, the cooling modes of high and low temperature test box are mechanical cooling and auxiliary liquid nitrogen cooling. Mechanical refrigeration adopts ste...
Introduction Product development and quality assurance in many sectors cannot proceed without extensive environmental testing. Manufacturers may test the performance, durability, and resistance to deterioration of their materials and products by simulating the extreme circumstances that they may meet in the real world. The use of salt spray chambers is a common technique for environmental testing....
Isolation transformer is a special type of transformer, which has its input and output winding connected in an electrically isolated fashion, mainly used in occasions with reverse phase separation, to realize electrical isolation and simultaneous voltage step-up/down. The main application of isolation transformer is to electrically isolate two related circuits, usually applied in electronic indust...
The terms electromagnetic compatibility (EMC) and electromagnetic interference are often used interchangeably when talking about the testing of commercial electronic goods and products. Because the two types of tests share so many similarities, it’s very easy to confuse one with the other. In this article, we will attempt to highlight some of the major differences between EMC and EMI testing. We...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語