Introduction Medical device testing and validation rely heavily on temperature and humidity chambers. Safety, dependability, and efficacy of medical equipment are of paramount importance; hence the sector is strictly controlled. The reaction of medical equipment to changes in temperature and humidity may be evaluated in controlled settings called temperature humidity chambers. This article will di...
The Salt Corrosion Test is a method that uses a test device called a “Salt Spray Corrosion Test Chamber” with a certain volume space to assess the corrosion resistance quality of a product to salt spray corrosion through artificial means within its volume space. The salt concentration of chloride in the artificial salt spray environment is several times or tens of times higher than tha...
Introduction In the aerospace and defense industries, where the reliable operation of critical systems is of utmost importance, ensuring electromagnetic compatibility (EMC) is crucial. The coexistence of numerous electronic devices in these sectors necessitates the effective management of electromagnetic interference (EMI) to prevent malfunctions and maintain optimal performance. EMI test receiver...
The sand dust test chamber is an instrument that can accurately detect the sealing and anti wind sand performance of outdoor equipment, transportation, electronic communication and other industry product casings. It mainly simulates the damage caused by sandstorm and flying dust weather to various high sealing products such as locks, instruments, and vehicle accessories. Improve the product’...
Spectrum Analyzers and EMI Receivers are very common in LED Lighting, home appliances, communications and power tools testing, and many tests can be completed independently. So what are the differences between them? EMI Receivers VS Spectrum Analyzers 1. Principle differences: Spectrum Analyzer: The main tool for spectrum analysis, sweep out-of-band is the mainstream, using sweep measurement techn...
Introduction Salt water and other corrosive substances are only two of the environmental hazards that aerospace parts and structures must contend with. The aerospace sector places a premium on products’ durability and dependability. Corrosion resistance of materials and coatings used in aircraft production and upkeep is critically evaluated by salt spray testing. The importance of salt spray...
Integrating sphere, also known as a LED Measurement System, is a hollow spherical shell. Integrating spheres are usually made of metal materials and have an inner wall coated with a white high diffuse reflectance layer (typically magnesium oxide or barium sulfate), ensuring uniform diffuse reflection at every point on the inner wall. There are also integrating spheres made of high reflectance pol...
The electrostatic discharge generator is a device used to generate a high-intensity electrostatic field and induce electrostatic discharge phenomena. Electrostatic discharge is a process of charge release, which occurs when an object accumulates excessive charge beyond its capacity and the charge is discharged through air or other medium. ESD61000-2_Electrostatic Discharge Simulator I. The working...
The IPX8 Immersion tank Waterproof test Device is applied to electronic components, outdoor lighting fixtures, mobile phone casings, automotive accessories, etc. It is a test that artificially simulates the natural environment. It refers to the top being 1.5-30 meters away from the water surface for 30 consecutive minutes, with no impact on performance and no water leakage. IPX8 represents resista...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語