In recent years, with the development of LED technology and modern facilities such as global plant factories and vertical farms, the plant lighting market has ushered in new development opportunities, becoming the choice of many lighting manufacturers to compete in differentiated ways. Optical measuring equipment, especially the LPCE-2 Integrating Sphere Spectrophotometer system can help the devel...
Introduction The performance, dependability, and longevity of automotive components and systems may be evaluated under severe temperature settings, making thermal chambers an essential tool for automotive testing. The automobile sector works in a wide range of climates, where even little temperature shifts may have a major influence on vehicle performance and durability. In order to simulate real-...
Enclosures of Polymeric Material for Portable Appliances 1. Scope 1.1 These requirements cover polymeric enclosures or parts of enclosures, of portable cord-connected food preparing appliances. For the purposes of the requirements in this section, an under-cabinet appliance is considered to be a portable appliance. 1.2 These requirements also cover polymeric decorative and similar parts that do ...
On 30th, May, 2023, the State Market Regulatory Administration of China announces the situation of national spot check on product quality in 2022, which publishes the 118 kinds of product quality and safety spot check conducted by the Market Regulatory Administration in 2022. I. Overall Situation In the whole year, 18397 enterprises producing and operating 19440 batches of products were tested an...
What is BS EN 50636-2-100 – Requirements for garden blowers, vacuums, and blower vacuums about? BS EN 50636-2 is a European standard that discusses the safety of households and similar electrical appliances. BS EN 50636-2-100 is a part of a multi-series standard that provides requirements for hand-held mains-operated garden blowers, vacuums, and blower vacuums. SMT A102_AL BS EN 50636-2-100...
Introduction Powering electronic gadgets, from smartphones to electric cars, through wireless charging systems is a rapidly growing industry. The effectiveness and compatibility of these systems may be compromised, however, by electromagnetic interference (EMI), which is introduced by the use of wireless charging technologies. Electromagnetic interference (EMI) may cause power outages, inefficient...
If you have products certified to 60950-1, you may have questions about what happens after the withdrawal date. On December 20, 2020, 60950-1 will be officially withdrawn, ending a legacy of this standard that spanned over 30 years covering information technology products. In addition, the 60065 audio video standard will also be withdrawn. Prior to the introduction of IEC 60950 (or its brief prede...
Recently, the Saudi Standards, Metrology and Quality Organization (SASO) updated its regulations concerning energy efficiency applications and the regulations will be officially implemented on 30th June, 2023. It is specified that the energy efficiency application can only be applied through the accounts of the manufacturer or importer and should not be transferred from the manufacturer or importe...
Introduction The corrosion resistance and longevity of different materials and products may be accurately evaluated with the use of salt spray test chambers. In the past, these chambers had to be operated and monitored by hand, which might be inefficient and lead to mistakes. With the advent of automation and robots, however, salt spray test chambers have experienced radical changes. Recent develo...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語