With the popularity of smart devices and increasing demands for waterproof and dustproof features in devices like smartphones and watches, waterproof and dustproof technologies have received more and more attention. In the market, the commonly seen waterproof and dustproof ratings are IP68 and IP65. In this article, we will explore the differences between IP68 waterproof and dustproof tests and IP...
Colorimeter, also known as chroma meter or portable colorimeter, is a color measurement device used to measure color differences in objects, capture and evaluate colors, and plays an important role in color control programs. Brands and designers use them to specify and communicate colors, while manufacturers use them to monitor color accuracy throughout the entire production process. Chromatic ab...
General conditions for type testing All tests shall be type tests Unless otherwise specified in this part of BS 1363 the socket-outlets shall be tested as delivered by the manufacturer or responsible vendor and under normal conditions of use, at an ambient temperature of 20 °℃ ±5 °℃, after being conditioned at normal laboratory temperature and humidity levels for at least 4 days. Unless oth...
Introduction An integrating sphere is a spherical device used to measure the optical properties of materials. It is a hollow sphere coated with a highly reflective material on the inside surface. The sphere is designed to uniformly distribute light from a source to the sample and collect the reflected light from the sample. Integrating sphere are used in a wide range of applications, including lig...
The ozone aging test chamber is suitable for temperature resistance testing of non-metallic materials, as well as ventilation aging testing and inspection of electronic component parts and molten goods. It can be used to vulcanize rubber products such as rubber materials, thermosetting plastic vulcanized rubber, cable insulation sheaths, and other products, exposed to closed type under static ten...
Flush receptacles The grounding terminal of a grounding-type flush receptacle shall be spaced at least 1/4 inch (6.4mm) from any ungrounded live part (associated with other than a white grounded terminal) exposed to contact by a grounding conductor in the outlet box. Live parts accessible from within the cavity of an outlet box are considered exposed to contact by a grounding conductor if they can...
IPX9K High Temperature Pressure Jet Waterproof Test Chamber is a test equipment specially used to simulate extreme environmental conditions in industries such as automobiles, aerospace and ships. The test chamber has the characteristics of high temperature, high pressure, high humidity, etc., and can simulate working conditions in extreme weather and harsh environments to ensure product quality a...
The sand and dust test chamber is suitable for the antifouling test of parts and materials such as welders, electronic equipment, electrical products, automobile lights, motorcycles, chemical plants, etc., and then check the shell sealing performance of the goods GB4208-93 shell protection level IP5X/IP6X antifouling test. The key of the sand and dust test chamber is to simulate the damage of win...
9.1 General 9.1.1 A device shall have live parts protected against exposure to contact by persons when fully assembled using all essential parts (described in 9.1.5) and installed in the intended manner. Exception No. 1: Male blades which are energized only when mated with the corresponding outlet are not required to comply with this requirement. Exception No. 2: Exposed wiring terminals or other ...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語