A set of three sample pins shall be tested by means of the apparatus shown in Figure 10 which has a blade 0.70+005mm wide and a radius of 3 mm ±0.1 mm. The test shall be made on one pin of each plug not used for the test described in 13.17.3. A sample shall be positioned as shown in Eigure 10 and the test apparatus shall be loaded so that the blade exerts a force of 2.5N on the sample. The test a...
1. General 1.1 Scope and object This International Standard specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. The object of this International S...
1 General 1.1 Scope 1.1.1 Equipment covered by this standard This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V and designed to be installed in accordance with the Canadian Electrical Code.Part1.CSA C22.1 12:General Requirements-Canadian Electric...
6 General conditions for type testing 6.1 All tests shall be type tests. Unless otherwise specified in this part of BS 1363 the socket-outlets shall be tested as delivered by the manufacturer or responsible vendor and under normal conditions of use, at an ambient temperature of 20 ℃ ±5 °C, after being conditioned at normal laboratory temperature and humidity levels for at least 4 days. GNGPL 3...
Assembly Security Test A flush receptacle having a 5-15R,5-20R,6-15R, or 6-20R configuration is to be mounted in the fixture described in Figure 124.1, and 50 lbf (220 N) is to be applied, as shown in Figure 124.2, for a period of 10 s by means of a push-out tool inserted into the slots of the receptacle. The push-out tool required for configuration 5-15R is to be as shown in Figure 124.3. The too...
Performance configuration of colorimeter: 1. “You need to know which colorimeter is suitable for your industry, and the requirements for color difference accuracy are different for each industry, that is, △ Eab. If △ Eab is between 0-1, you must choose an instrument with higher accuracy;”; These are generally rubber and plastic, paint and paint industries; If you do not need a rela...
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will b...
What Is A Bulk Current Injection: High current injection is a testing technique in automotive electronics used to verify whether a product will experience functional degradation or exceed tolerance limits when subjected to electromagnetic interference of different frequency ranges. This test is commonly encountered in EMC testing for automotive electronics, as in actual vehicle scenarios, the conn...
Rapid temperature change test chamber: Suitable for aerospace, information electronics, instrumentation, materials, electrical, electronic products, and various vital parts to judge whether parameters such as reliability, machine stability, and performance are qualified in high and low temperature or humid heat environments, and will be provided to The basis for you to predict and improve product...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語