There is no doubt that safety is a paramount concern in any industry. That’s why at LISUN, we focus on ensuring the highest level of safety in our glow wire testing products. 1． Glow wire tester application: The glow-wire tester uses simulation technology to evaluate the fire hazard caused by heat sources such as glowing components or overload resistors in a short time due to thermal stres...
Electromagnetic interference is mainly divided into radiation type interference and conduction type interference. The electromagnetic interference transmitted through space belongs to radiation type, and the electromagnetic interference transmitted to the power grid through power lines belongs to conduction type According to IEC, CISPR, GB and other EMI specifications, conducted disturbance mainly...
IEC (International Electrotechnical Commission) is the earliest international standardization organization in the world. It was established in 1906 to enhance international mutual understanding and hope that national committees can use these international standards if their own conditions permit IEC is mainly responsible for international standardization of electrical engineering, electronic engin...
Integrating sphere measurement system is the most common light color measurement equipment in the lamp industry. Its measurement results can meet the R & D and testing needs of most products. It is a more economical measurement means. Principle of Integrating sphere test system: 1. use the standard lamp for calibration, obtain the luminous flux data of the tested lamp through the coefficient...
Electricity discharge may cause electronic products such as mobile phones, electronic products remote control, smart locks, smart LED lighting systems, etc., or e -components, IC chips, LED lamp bead light source modules, etc. Essence Sudden failure causes the permanent failure and short circuit of electronic products. The potential failure can deteriorate the performance parameters of electronic ...
Integral sphere measurement system is the most common light color measurement equipment in the luminaire industry, and its measurement results can meet the needs of most product development and testing, which is a relatively economical measurement method. The following is a brief introduction to the working principle of the integrating sphere measurement system and its measuring method of the inte...
LED lighting products are rapidly replacing traditional lighting products due to their superior luminous performance and high efficiency and energy saving. With people’s continuous pursuit of high efficiency and health, LED lighting products and technologies are constantly improving. The important basis for this is how to effectively and accurately measure LED actual performance, for which L...
Flicker Test System also known as stroboscopic still or tachometer, is an optical measuring device that can change a vibrating, high-speed rotating or periodically moving component into a “stationary” component. Flicker Test System itself can emit a short and frequent flash, and its flash speed can be set by the user according to needs. When the flash frequency of the stroboscope is ad...
ESD simulatorguns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. ESD61000-2_Electrostatic Discharge Simulator In a dry environment, the human body generates static electricity on the object or the friction between two objects, so the charged human body will easily discharg...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語