Colorimeter is also called portable colorimeter, color analyzer and chroma meter. The colorimeter is a simple color deviation testing instrument, that is, to make a filter that simulates the spectral characteristics equivalent to the color sensitivity of the human eye, and use it to measure the light of the sample plate. The key is to design the spectral sensitivity characteristics of this photose...
IPX9k High Temperature Pressure Jet Waterproof Test Chamber is to conduct a waterproof high temperature and high pressure rain impact test on the product by using the high temperature and high pressure spray test method. IPX9K waterproof test box is applied to automobiles, buses, motorcycles, battery packs, charging piles, containers, energy storage cabinets, laser radar, millimeter wave light rad...
Dustproof chamber can also be called sand dust chamber , sand dust test chamber, dust test chamber, etc. It is used to test the physical and other related properties of products such as electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components under the simulated dust climate conditions. After the test, the performance of t...
The UV aging chamber is an experimental device used to simulate the UV radiation environment of the sun and accelerate the aging process of materials. It can effectively test the aging of materials in a short period of time, and evaluate the weather resistance and service life of materials. In order to ensure accurate and reliable test results, it is necessary to establish a set of scientific test...
If the high and low temperature humidity chamber uses ordinary water humidification particles, it will be relatively large. The humidity sensors of the equipment are more common, such as capacitance sensors and Honeywell sensors. If the test equipment has requirements for humidity for a long time, it will affect the service life of the humidity sensors. Because some humidity sensors’ printed...
Color mixing principle: In the actual measurement with a colorimeter, we mark the measured data coordinate system as a static coordinate point (called the starting point). In order to ensure the stability of the printing color phase during the printing process, the inker needs to adjust the ink ratio and viscosity at any time, so that the measurement can be made after each adjustment, and other co...
UV aging test Chamber is designed for evaluating the resistant performance of non-metallic materials, organic materials (plastics, paints, coatings, rubbers, etc.) under the specified conditions such as sunlight, temperature, and other climatic conditions. It creates a man-made testing environment imitating the natural light source such as sunlight and other damages in the nature, such as rain and...
IPX9K High Temperature Pressure Jet Waterproof Test Chamber is mainly used for passenger cars, buses, tractors, motorcycles and other vehicles as well as their parts. It tests the physical and other related properties of products under the cleaning process conditions of high-pressure/steam jet cleaning. After the test, the performance of the product can be judged by verification, so as to facilita...
The core component of the compressor in the refrigeration system is the core component of the high and low temperature chamber, which plays a decisive role in the whole refrigeration system. However, in general, the compressor should not be started more than 6 times per hour, otherwise it will be deemed as a failure. What is the reason for the uninterrupted operation of the compressor? 1. The powe...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語