Household power supply specifications will vary by region, but generally speaking, voltage values are usually between 100V and 240V, while the most common frequency values are 50Hz and 60Hz. Factories using polyphase power will have more differentiated power supplies with higher voltages and more specialized plugs and sockets for larger equipment, but will still use the general power supplies show...
With the continuous development of technology, various electronic devices are becoming more and more widely used in our lives. Electronic devices usually need to be tested in a controlled environment to ensure their functionality and reliability. Walk-in dust test chambers are commonly used testing equipment that can perform dustproof performance tests on electronic devices according to the IP5X d...
Switches MANUALLY OPERATED MECHANICAL SWITCHES which -control currents exceeding 0,2 A r.m.s. a.c. or d.c., and/or – have voltage across the open switch contacts exceeding 35 V (peak) a.c. or 24 V d.c. shall meet one of the following requirements: a) The switch tested as a separate component, shall comply with the requirements and tests of IEC 61058-1, whereby the following applies: – ...
IEC 60529 describes a system for classifying the degrees of protection provided by the enclosures of electrical equipment. Whilst this system is suitable for use with most types of electrical equipment, it should not be assumed that all the listed degrees of protection are applicable to a particular type of equipment. The manufacturer of the equipment should be consulted to determine the degrees o...
In order to achieve reproducibility, temperature tests must be designed in such a way that the highest or lowest temperature reached at a certain point in the high and low temperature test chamber is the same, regardless of the laboratory in which the test is conducted. For test designs with a shorter duration compared to the time required for the test sample to reach temperature stability, the fo...
Introduction Electromagnetic compatibility (EMC) is significant in the field of industrial automation, where continuous production processes are essential for success. Numerous electronic devices coexisting in industrial settings may cause electromagnetic interference (EMI) and interfere with the efficient operation of automated systems. In order to properly evaluate and remedy EMI concerns in ind...
In recent years, with the popularity of electronic devices and the rapid development of wireless communication, the potential harm of electromagnetic field radiation to human health has attracted wide attention. In order to protect people’s health and ensure the normal operation of electronic devices, it has become particularly important to conduct EMI, conducted emission and radiated emissi...
The IPx9K High Temperature Pressure Jet Waterproof Test Chamber is a testing equipment that can simulate high-pressure water injection conditions in real environments, used to test the waterproof and sealing performance of electronic devices or automotive components under high-pressure and high-temperature water flow impact. It is composed of nozzles, water pumps, heaters, etc. Among them, IPX9K i...
8. Protection of Users-Accessibility of Uninsulated Live Parts and Moving Parts-and User Servicing 8.1 The requirements in 8.2-8.17 apply only to low voltage parts that are accessible to the user and are isolated from medium voltage circuits. See 8.18 for requirements for medium voltage parts and low voltage parts that are not isolated from medium voltage circuits. For protection of service person...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語