Specification:
EMC is a science subject which studies how electric appliance or system can work together without causing performance declass within limited space, limited time, limited frequency spectrum resource. To speak simply, electronic-magnetic interference emission from qualified electric appliance or system should be in accordance with standard (less than a value), meanwhile the capability to resist electronic-magnetic interference should also accord to standard (higher than a value). Electronic-magnetic interference emission is by 2 ways: space emission; power cord emission in electricity network which pollutes the power network. plus the EMC200A manual simulation of power network, which can fully meet the test requirements of standard such as PCC, EN and GB.
• Measure PD,QP and AV range from: 20dBμV-130dBμV(9kHz-150kHz);10dBμV-90dBμV (150kHz-30MHz)
• Band width: 9kHz～150kHz: 200Hz,150kHz-30MHz: 9kHz
• Frequency sweeping step length: 100Hz/200Hz/400Hz/(9kHz-150kHz), 5kHz/10kHz/20kHz(150kHz-30MHz)
• Accuracy: ±3dBuV
• Input resistance 50Ω,Max.input signal2V,Protected at 5V
• Use 50Ω/50μH+5Ω single phase simulative network according to CISPR standard
• Limit value freely set for the convenience of customer, the built-in limit value in instrument according to GB 17743,FCC,EN55015,EN55022 can be used directly
• Run under Windows 2000/XP English Version

Products of this category:
EMC500: This EMC test system is the update model of EMC300A. Measure Range from 9kHZ~300mHZ. The basic functions and principles of EMC500 are based on EMC300A.
ESD61000-2: Electrostatic discharge simulator (electrostatic gun) is in full compliance with IEC61000-4-2,  EN61000-4-2 and GB/T17626.2 standards.
EMC300A: EMC testing is a science subject which studies how electric appliance or system can work together without causing performance declass within limited space, limited time, limited frequency spectrum resource. This EMI testing system Measure PD,QP and AV range from: 20dBμV-130dBμV(9kHz-150kHz);10dBμV-90dBμV (150kHz-30MHz).
EFT61000-4: This EFT immunity measurement meets the standard requirement of IEC 61000-4-4, EN61000-4-4 and GB/T17626.4 (high voltage regulator is adopted, and displayed by LCD）.
SG61000-5: The performance of this surge generator meet the IEC61000-4-5, EN61000-4-5 and GB/T17626.5 standards.
RWG61000-12 Ring Wave Generator is the test equipment in conformity to IEC standard IEC 61000-4-12 and ANSI-C62-41.  
CSS61000-11: Voltage dip and interruption generator meet the standard requirements of IEC61000-4-11, EN61000-4-11 and GB/T17626.11.
EMC200A／EMC200B: EMI Receiver equipped with this artificial network can test interference voltage of mains terminals.
CDN-M23: EMI Receiver equipped with this coupling/decoupling network is equivalent to test radiated electromagnetic disturbance of electric lighting appliance with frequency from 30~300MHz.
AB-CLP: EMI Receiver equipped with this absorbing clamp can indirectly test radiated interference power of household electrical appliance, power tool and similar electrical appliance with frequency from 30~300MHz.
VOL-PBE: EMI Receiver equipped with this voltage probe can test disturbance voltage from load terminals or control terminals.