Angles Gloss Meter

Product No: AGM-500/AGM-580
Get a Quote

Your email address will not be published. Required fields are marked *

Basic Introduction
Angles Gloss Meter is mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter meets the requirement of DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on.

Instrument Introduction
• Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure highly precise of the measured data. Our gloss meters conform to JJG 696 standard for first class gloss meters. Every machine has metrology accreditation certificate from National Institute Of Quality Inspection and Research center
• Every gloss meter made by Lisun has done the following test: 412 calibration tests; 43200 stability tests; 110 hours of accelerated aging test; 17000 vibration test
• The shell is made by Dow Corning Ti SLV material, a desirable elastic material. It is resistant to UV and bacteria and do not cause allergy. This design is for better user experience.
• Download

Technical Parameters

Model AGM-580
Test Angle 20°、60°、85°
Test light spot(mm))

20°: 10*1060°: 9*15

85°: 5*38

Test range

20°: 0-2000GU60°: 0-1000GU

85°: 0-160GU

Resolution 0.1GU
Test modes Simple mode, standard mode and sample testing mode
Repeatability 0-100GU: 0.2GU100-2000GU: 0.2%GU
Accuracy Conform to JJG 696 standard for first class gloss meter
Test time Less than 1s
Data storage 100 standard samples; 10000 test samples
Size(mm) 165*51*77 (L*W*H)
Weight About 400g
Language Chinese and English
Battery capacity 3000mAh lithium battery
Port USB, Bluetooth (optional)
Upper-PC Software Include
Working Temperature 0-40℃
Working Humidity <85%, no condensation
Accessories 5V/2A charger, USB cable, operating manual, software CD, calibration boards, metrology accreditation certification

 

Product Categories
Back
Top
Close