Specification: 
UI5000 is the updated version of UI3000 with super-big LCD for displaying waveforms and parameters directly, it includes all the functions and technical parameters of UI3000. Reports can be printed if printer connected. It also meets the latest requirements for electronic ballasts in international standards IEC60929, IEC60969, IEC61000-3-2, GB/T15144-2005, GB/T17263-1998.
• UI5000 has expanding analysis for envelope wave.
• Measure parameter:
1) Input: Vrms, Lrms, W, PF, Hz, Phasic angle, total harmonic and 0-39 component of harmonic.
2) Output: Lamp voltage, Lamp current, Filament current, Guided cathodic current, Lamp power, crest factor and oscillatory frequency, single high frequency analysis.
• Startup lamp voltage, lamp current, filament current, guided cathodic current curve and parameter, preheating time.
• Simultaneously display on 8 windows for input and output parameters, convenient for comparing and analysis.
• Test preheat energy, filament preheat time. And the parameters changes from 0 to 5s of filament voltage, filament current and filament power.
• Up to 1MHz lrms test content to every EB.
• Analysis symmetry of high Frequency curve of lout.
• 12-bit high-speed A/D, sampling rate up to 10MHz,can easily analysis signal curve of output.
• Finish a input and output testing at the same time within 1 minute.
• Portable, can test , display, print without computer, test report include data and curve, comply with international standard.
• Communication port for PC, run under Windows2000 or Windows XP.
 

Products of this category:
UI5000: This electronic ballast tester is updated version of UI3000. UI5000 ballast tester is with super-big LCD.
UI4000: Similar to UI5000. Contact us for more about how to test a ballast.
UI3000: This electronic ballast analyzer uses 12digit high-speed A/D converter to test ballast. The speed reaches 10MHz when sampling.
ATE-1: Test series connection, parallel connection and series/parallel connections of electronic ballast(about 15 kinds of connections), available for testing fluorescent ballast of various kinds.
UI2000-OK: Electronic Ballast Production Line Tester. With high speed when doing ballast testing.
UI2002A: Electronic Ballast High Frequency Parameters Tester. Testing a ballast with high frequency.
UI2002: Output Characteristic Analyzer of Electronic Ballast. Accuracy of this ballast test solution: class 2.
UI2002C: Fluorescent Lamp Asymmetric Pulse Tester. It's designed according to the latest update in IEC61347-2-3.
UI2001B: Integrated Function Tester for Inductance Ballast.
UI2000A-HID: HID Ballast Tester.
UI2000A-CCFL: CCFL Ballast Tester.
UI2000-ET: Electronic Transformer Tester. This transformer test equipment analyze both input and output characteristics, and can print without computer.
UI2001: Input Characteristic Analyzer of Electronic Ballast. Test fluorescent ballast input characteristics.
FD-1: Online OK Tester for Electronic Ballast and CFL. Suitable for mass testing in assembly line. Test 6 pieces at one time when testing ballast.