Waterproof Test Chamber

Product No: JL-XC

  • Description
  • Inquiry

JL-XC series waterproof test chamber is mainly used for small electronic and electrical products. Such as lamps, electrical cabinets, electrical components and so one. The products are tested for physical and other related properties under simulated climatic conditions. After the test, it is judged whether the performance of the product meets the requirements by verification, so as to be used in the design, improvement, verification and factory inspection of the product. Comply with IEC60529:2001 《Degrees of protection provided by enclosures (IP Code)》, GB4208-2008 《Shell Protection Grade (IP Code)》 14.2.8 Terms and GB7000.1 《Lamps Part 1: General Requirements and Tests》 9.2.9 Terms.

Features:
• The outer casing is made of high-quality steel plate, and the surface is painted with paint, which is beautiful and durable. The inner box,and the turntable, and the wading part are all made of SUS304# stainless steel plate, and it is ensured that it will not rust after using for a long time. (Inner box sheet thickness: 1.2mm, able to resist water impact)
• IPX12: With compressed air drying function, after the test is completed, the excess water in the drip tank can be removed to avoid long-term water accumulation and fouling, causing block the pinhole (Please note: need users supply gas source)
• IPX34: The pendulum tube driver adopts high-quality servo stepping motor, the swinging speed and angle are precisely adjustable, and there is no out-of-step problem (the risk of out-of-step: it will cause the swinging tube to malfunction, hitting the middle turntable shaft, causing equipment damage)
• IPX56: Monolithic structure, not need the operator to carry a spray gun to do the test, just start the test directly after fixing the sample.
• The water supply line is equipped with a filter to filter impurities in the water to prevent nozzle clogging.
• The LED waterproof lighting is installed in the test box, and there is a large observation window on the door to facilitate the observation of the test sample.
• The equipment equipped with a water tank recycling water, no need building a professional waterproof test room. The water tank float valve in the water tank automatically controls the water inlet, and has high and low water level alarm monitoring to effectively prevent the pump from being damaged due to running out of water.
• The turntable uses a stepper motor, the speed can be set on the touch screen, and can control the forward and reverse rotation (suitable for the sample power-on test to prevent winding).
• Touch screen control function: The self-developed IPX waterproof level test operation interface, directly select the waterproof level, you can automatically test according to the waterproof rating conditions in the standard terms.
• Test sample input power: single-phase 220V/10A (other specifications can be customized)
• Equipment power supply frequency: Default 50Hz (LISUN can customize 60Hz special equipment. Special note: 50Hz equipment will run faster under 60Hz power supply, so will not meet the standard requirements, and too fast speed will cause overheating and shorten its life)

Specifications

ModelJL-12CP-600MJL-12CP-1200M
Test LevelIPX1,IPX2
Drip size600*600mm1200*1200mm
Drip aperture¢0.4mm
Distance between drip holes20*20 mm
Turntable diameter¢600 mm
Flow1-5 mm/min(±0.5mm/min)
Flow adjustment methodManual adjust
Drip board lifting methodNot lifting (Fixed)
Turntable height range350-700 mm
Turntable maximum load bearing50KG
Turntable tilt0°or15°(horizontal direction)
Turntable speed1 r/min(IPX1)
Test time0-999 min
Security functionLeakage protection, water shortage protection, short circuit protection
Equipment power supply380V/Three-phase/50Hz (60Hz customizable)

 

ModelJL-34CP-R200JL-34CP-R400JL-34CP-R600
Test LevelIPX3,IPX4
Swing tube sizeR200mmR400mm(Can be added R200mm swing tube)R600mm(Can be added R400mm, R200mm swing tube)
Inner box size500*500*500mm900*900*900mm1300*300*1300mm
Water jet aperture size0.4mm
Swing tube inner diameter15mm
Turntable diameter200mm400mm600mm
Flow0-1L/min0-2L/min0-3L/min
Turntable Maximum load bearing50kg
Turntable height range150-250mm350-600mm550-1000mm
Turntable rotation speed1-5r/min(Precision adjustable)
Turntable rotationAlways forward / Forward and reverse alternate
Pendulum angle120º(IPX3),350º(IPX4)Or custom settings
Swing tube Swing speed240°back and forth 4S,720°back and forth 12S(Precision control) or custom settings
Security functionLeakage protection, water shortage protection, short circuit protection
Equipment power supply220V/Single Phase/50Hz(60Hz customizable)

 

ModelJL-56CP-200LJL-56CP -500LJL-56CP -1000LJL-56CP -1400L
Test LevelIPX5,IPX6
Inner box size600*600*600mm800*800*800 mm1000*1000*1000mm1180*1180*1000mm
Water tank volumeabout100L
Turntable size¢400mm¢600mm¢600mm¢800mm
IPX5 Water spray aperture¢6.3mm
IPX6 Water spray aperture¢12.5mm
IPX5 Water spray flow12.5±0.625(L/min)
IPX6 Water spray flow100±5(L/min)
Flow adjustment methodManual adjust (Rotor flowmeter)
Water spray distance2.8m
Spray gun fixing methodMechanically fixed and can adjust the angle of the gun manually (if need to automatically swing the spray gun, please order JL-56CA series)
Turntable maximum load bearing50KG
Turntable lifting rangeNot lifting (Fixed)
Water spray methodRecyclable
Security functionLeakage protection, water shortage protection, short circuit protection
Equipment power supply380V/Three-phase/50Hz (60Hz customizable)

 

ModelJL-1234CP -R200JL-1234CP -R400JL-1234KCP-R400
Test LevelIPX1,IPX2,IPX3, IPX4IPX1,IPX2,IPX3, IPX4, IPX4K
Inner box size500*500*650mm900*900*1050mm900*900*1050mm
Turntable size¢200mm¢400mm
Turntable maximum load bearing50KG
Turntable height range150-250 mm450-750 mm
Turntable tilt0°or15°(horizontal direction)
Turntable speed1 -5r/min(Precision adjustable)
Turntable rotationAlways forward / Forward and reverse alternate / intermittent rotation
Test time0-999 min
IPX12 part – technical parameters
Drip size200*200mm600*600mm
Drip aperture¢0.4mm
Distance between drip holes20*20 mm
FlowIPX1=1mm/min;IPX2=3mm/min
Flow adjustment methodManual adjust
Drip board lifting methodCan not lifting (fixed)
IPX34 part – technical parameters
Swing tube sizeR200mmR400mm(Can be added R200mm swing tube)
Pendulum flowIPX3=0.56L/min;IPX4=0.84L/minIPX3=1.1L/min;IPX4=1.8L/min;IPX4K=15L/min
Water jet aperture size0.4mm0.8mm
Water spray aperture spacing50mm
Swing tube inner diameter15mm
Pendulum angle120º(IPX3),350º(IPX4)Or custom settings
Swing tube Swing speed240°back and forth 4S,720°back and forth 12S (precise control) or custom
Security functionLeakage protection, water shortage protection, short circuit protection
Equipment power supply380V/Three-phase/50Hz (60Hz customizable)

 

ModelJL-3456CP-R400JL-3456CP-R600JL-3456CP-R800
Test LevelIPX3, IPX4, IPX5, IPX6
Turntable diameter400mmR600mmR800mm
Turntable maximum load bearing50KG
Turntable lifting height400-750mm550mm—1100mm
Turntable speed1-5r/min(accurately adjustable)
Turntable tilt0°or15°(horizontal direction)
Turntable rotation  Always forward / forward and reverse alternate / intermittent rotation
Flow adjustment methodManually adjust
Test time0-999min
IPX34 technology parameters
Swing tube sizeR400mm(Can be added R200mm swing tube)R600mm(Can be added R400/R200mm swing tube)R800mm(Can be added R600/R400/R200mm swing tube)
Pendulum flowIPX3=1.1L/min;IPX4=1.8L/min
Water jet aperture size0.4mm
Water spray aperture spacing50mm
Swing tube inner diameter15mm
Pendulum angle120°(IPX3),350°(IPX4) or custom settings
Swing tube Swing speed240°back and forth 4s,720°back and forth 12s(precise control) or custom
IPX56 Technical Parameters
IPX5 Water jet aperture¢6.3mm
IPX6 Water jet aperture    ¢12.5mm
Water spray distance2.5m(the distance from the nozzle to the center of the turntable)
IPX5 Water spray flow12.5±0.625(L/min)
IPX6 Water spray flow100±5(L/min)
Flow adjustment methodmanual adjust
Spray gun fixing methodMechanically fixed and can adjust the angle of the gun manually (if need to automatically swing the spray gun, please order JL-3456CA series)
Equipment power supply380V/Three-phase/50Hz (60Hz customizable)

 

ModelJL-123456CP-R400JL-123456CP-R600
Test levelIPX1, IPX2, IPX3, IPX4, IPX5, IPX6
Turntable diameter400mm600mm
Turntable maximum load bearing50KG
Turntable lifting height400-750mm550mm—1100mm
Turntable speed1-5r/min(accurately adjustable)
Turntable tilt0°or15°(horizontal direction)
Turntable rotationAlways forward / forward and reverse alternate / intermittent rotation
Flow adjustment methodManually adjust
Test time0-999min
IPX12 Technical Parameters
Drip size600*600mm
Drip aperture¢0.4mm
Distance between drip holes20*20mm
FlowIPX1=1mm/min;IPX2=3mm/min
Flow adjustment methodManually adjust
Drip board lifting methodCan not lifting (fixed)
IPX34 Technical Parameters
Swing tube sizeR400mm(Can be added with R200mm swing tube)R600mm(Can be added with R400/R200mm swing tube)
Pendulum flowIPX3=1.8L/min;IPX4=2.6L/min
Water jet aperture size0.4mm
Water spray aperture spacing50mm
Swing tube inner diameter15mm
Pendulum angle120°(IPX3),350°(IPX4) or custom settings
Swing tube Swing speed240°back and forth 4s,720°back and forth 12s(precise control) or custom
IPX56 Technical Parameters
IPX5 Water jet aperture¢6.3mm
IPX6 Water jet aperture¢12.5mm
Water spray distance2.5m(the distance from the nozzle to the center of the turntable)
IPX5 Water spray flow12.5±0.625(L/min)
IPX6 Water spray flow100±5(L/min)
Flow adjustment methodManual adjust (Rotor flowmeter)
Spray gun fixing methodMechanically fixed and can adjust the angle of the gun manually (if need to automatically swing the spray gun, please order JL-123456CA series)
Equipment power supply380V/Three-phase/50Hz (60Hz customizable)