EN 14604:2005 is a harmonized European standard specifying all test requirements for residential smoke alarm devices powered by mains or battery, covering mechanical, climatic, chemical ageing,...
UL 217:2024 (10th Edition) is the latest ANSI/UL safety standard governing electrically operated single/multiple‑station smoke alarms and portable travel alarms for indoor open‑area protection, recreational vehicles,...
UL 2075:2021, published by Underwriters Laboratories (UL) and updated in August 2021, is a safety standard covering fixed, portable, and transportable toxic and combustible gas/vapor detectors...
UL 2034:2024 is the latest US safety standard for single and multiple station interconnected carbon monoxide (CO) alarms. It sets mandatory electrical safety requirements for CO...
This International Standard IEC 61643-11:2011 specifies the general requirements for low‑voltage surge protective devices (SPDs) connected to low‑voltage power distribution systems. It defines terms, classification, operating...
IEC 60255-1:2022 establishes the general technical requirements for measuring relays and protection equipment used in power systems. It defines basic terms, rated values, construction, safety, insulation,...
IS 16102 (Part 2): 2026 specifies the performance requirements for self‑ballasted LED lamps used for general lighting services in India, complementing the safety provisions defined in...
IEC 60664-1:2020 is the core international standard for insulation coordination of low-voltage electrical equipment (AC ≤1000 V, DC ≤1500 V, frequency ≤30 kHz). It sets out...
ANSI C 136.10-2006 is an American National Standard specifically formulated for locking-type photocontrol devices and their mating receptacles used in roadway and area lighting equipment. It...
The core of IEC 62504:2014 lies in its systematic compilation of precise definitions for LED-specific components and systems, addressing the terminology confusion caused by rapid technological...
CISPR 14-2:2020 is a product family standard under the International Special Committee on Radio Interference (CISPR), dedicated to the electromagnetic immunity requirements of household appliances, electric...
As a revised edition released in 2023, IEC 61869-1:2023 supersedes the 2007 version of the same standard as well as IEC 61869-6:2016, updating technical content to...
IEC 60730-1:2010 defines general safety and performance requirements for automatic electrical controls used in or with household and similar equipment, encompassing energy sources like electricity, gas,...
UL 991:2000 is a critical safety standard from Underwriters Laboratories (UL) that outlines specific testing requirements for safety-related controls incorporating solid-state devices. Designed to address the...
UL 1447:2020 is a safety standard developed by Underwriters Laboratories (UL) for electric lawn mowers, covering both corded (rated voltage ≤250V) and battery-powered models. It specifies...
IEC 60983:2005 is an IEC-released international standard for miniature lamps, combining its 1995 2nd edition and 2005 Amendment 1 (IEC 60983:1995+AMD1:2005 CSV) with validity through 2025....
IEC 60809:2023 is an international standard published by the International Electrotechnical Commission (IEC) that specifies dimensional, electrical, and luminous requirements for lamps used in road vehicles.
IEC 60434:1973 is a standard for aircraft electrical filament lamps. It specifies the technical requirements to ensure the quality and interchangeability of these lamps. The standard...
IEC 60601-1:2005 is a standard that specifies the general requirements for the basic safety and essential performance of medical electrical equipment. It applies to various types...
CISPR 14-2:2015 specifies the electromagnetic immunity requirements for household appliances, electric tools, and similar apparatus. It applies to devices with a rated voltage not exceeding 250V...
CISPR 14-1:2016 (EN 55014:2021) is an international standard focusing on electromagnetic emission requirements for household appliances, electric tools, and similar apparatus. It specifies limits for radio-frequency...
IEC 62841-1:2014 “Electric Motor-Operated Hand-Held, Transportable Tools and Lawn and Garden Machinery – Safety – Part 1: General Requirements” establishes foundational safety guidelines for handheld and...
IEC 60745-1:2006 is a pivotal standard that details the safety requirements for hand-held motor-operated electric tools. Applicable to tools with single-phase AC/DC voltage up to 250V...
IEC 62115:2017 Electric toys—Safety is an international standard established by the International Electrotechnical Commission (IEC), specifying safety requirements for electric toys designed or intended for use...
IEC 62041:2010 sets forth the electromagnetic compatibility (EMC) requirements for transformers, power supplies, reactors, and similar products. This standard covers a wide range of equipment, including...
IEC 60081:2013 is an international standard that specifies the performance requirements for double – capped fluorescent lamps used in general lighting service. It covers various types...
The IEC 61547:2020 standard specifies the electromagnetic compatibility (EMC) immunity requirements for equipment intended for general lighting purposes. It applies to lighting devices such as LED...
IEC 62052 – 31:2024 is a standard about electricity metering equipment formulated by the International Electrotechnical Commission (IEC). It specifies general safety requirements and associated tests,...
IEC 62052-11:2020 focuses on the type testing specifications for electricity metering equipment used in alternating current (AC) systems. It applies to newly manufactured equipment used for...
IEC 60662:2002 is an international standard that specifies performance requirements for high-pressure sodium vapor lamps used in general lighting. This standard outlines technical specifications, including terms...
IEC 62052-11:2003 specifies general requirements, tests, and test conditions for AC electricity metering equipment. It covers aspects such as functionality, mechanical structure, electrical characteristics, and marking...
IEC 62640:2011 specifies requirements for residual current devices (RCDs) with or without overcurrent protection intended for household and similar applications. These devices are designed to provide...
IEC 60969:2016 specifies the performance requirements for self-ballasted compact fluorescent lamps (CFLs) intended for general lighting applications. It covers essential characteristics such as luminous flux, efficacy,...
This standard, “CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules and its supplement”, focuses on setting out measurement methods for electrical,...
IEC 61058-1:2016 is available as IEC 61058-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to...
This part of IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general...
The report CIE 121:1996 sets out to provide specifications for the standard conditions under which photometric tests should be carried out and to recommend testing procedures...
This International Standard IEC 60840:2011 specifies test methods and requirements for power cable systems, cables alone and accessories alone, for fixed installations and for rated voltages...
The IEC 62052-11 standard specifies the general requirements, testing methodologies, and test conditions for electricity metering equipment used in alternating current (AC) systems. It covers essential...
The IEC 62612:2013 standard specifies performance requirements for self-ballasted LED lamps intended for general lighting services, operating at supply voltages greater than 50 V. I
This part of IEC 60998 applies to connecting devices as separate entities for the connection of two or more electrical copper conductors (complying with IEC 60228...
The purpose of IEC 62208: 2023 standard is to harmonize as far as practicable all rules and requirements of a general nature applicable to empty enclosures...
This European Standard EN 61547: 2009 has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and...
This standard EN 62717:2017 provides test methods related to parameters as prescribed by Commission Regulation (EC) 244/2009, Commission Regulation (EU) 1194/2012and Commission Regulation (EU) 874/2012 while...
This European Standard EN 13032-1: 2004 establishes general principles for the measurement of basic photometric data for lighting application purposes.
This Indian Standard IS 16107 (Part 2/Sec1) was adopted by the Bureau of Indian Standards, after the draft finalized by the Illumination Engineering and Luminaires Sectional...
This Indian Standard IS 16103 (Part 2) was adopted by the Bureau of Indian Standards, after the draft finalized by the Electric Lamps and Their Auxiliaries...
The standard covers safety requirements for electrical appliances that operate with a voltage up to 250V for single-phase appliances and up to 480V for other appliances....
The purpose of this document IEC 60947-1:2020 is to harmonize as far as practicable all rules and requirements of a general nature applicable to low-voltage switchgear...
The IEC 61439-1: 2011 standard, titled “Low-voltage switchgear and controlgear assemblies – Part 1: General rules”, specifies the general requirements for low-voltage switchgear and controlgear assemblies....
This standard specifies the technical requirements for number plate lighting devices designed for use in automobiles, ensuring that the number plate remains visible under various driving...
This standard specifies the general requirements for elevated type aerodrome lighting fittings used in airports. It covers the design, manufacturing, and testing requirements to ensure safety,...
IS 16107-1 specifies the general performance requirements for luminaires. This standard is intended to ensure safety, functionality, and durability of various types of luminaires used in...
This Indian Standard IS 16101: 2012 which is identical with IEC/TS 62504 : 2011 ‘General lighting – LEDs and LED modules — Terms and definitions’ issued...
IEC 61000-4-5 defines test methods for evaluating the surge immunity of electrical and electronic equipment when subjected to high-energy disturbances caused by switching and lightning transients.
This standard sets the energy efficiency, functionality, and labeling requirements for indirect and direct general light sources with a luminous flux between 60 lumens and 12,000...
SASO has set the enforcement date for compliance with SASO standard 2927 for street lighting (Part III) to be September 1, 2020. UL Lighting laboratories have...
The BS 1363 series provides essential requirements for the safety, construction, dimensional accuracy, electrical and mechanical testing, and markings for the UK national electrical power plug...
IEC 60335-1:2020 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances...
This part of ISO 4064|OIML R 49 sets out details of the test programme, principles, equipment and procedures to be used for the type evaluation, and...
SAE ARP4087DWing Inspection Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIBSE Lighting Guide LG2: Lighting for healthcare premises
IEC 60601-2-18Medical electrical equipment- Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment need to use LISUN goniophotometer, integrating sphere and...
BS EN 12464-1Light and lighting. Lighting of work places Indoor work places need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SAE ARP798BDesign Criteria for White Incandescent Lighted Aerospace Instruments need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
DIN EN 4731Aerospace series – Spectral quality of LED luminaires used with photoluminescent marking systems need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
SAE ARP694DAerial Refueling Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.37Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power-driven vehicles and of their trailers need to use LISUN...
IEC 60601-1-2Medical electrical equipment- Part 1-2: General requirements for basic safety and essential performance – Collateral Standard: Electromagnetic disturbances- Requirements and tests need to use LISUN...
IEC 60601-2-41Medical electrical equipment – Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis need to use...
MIL-STD-3009LIGHTING, AIRCRAFT, NIGHT VISION IMAGING SYSTEM (NVIS) COMPATIBLE need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SAE ARP5825Design Requirements and Test Procedures for Dual Mode Exterior Lights need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SAE ARP582DLighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-002Aerospace series – Lamps, incandescent – Part 002: Main characteristics need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-003Aerospace series – Lamps, incandescent – Part 038: Lamp, code 44 – Product standard need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
EN 2756 Aerospace series — Lamps, incandescent — Tests methods need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.65UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SPECIAL WARNING LAMPS FOR MOTOR VEHICLES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-001Aerospace series – Lamps, incandescent – Part 001: Technical specification need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SASO 2902Energy Efficiency, Functionality and Labelling Requirements for Lighting Products Part 2 need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ISO 7137Aircraft- Environmental conditions and test procedures for airborne equipment need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ISO 8995 CIE S 008Lighting of Indoor Work Places need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-5Display lighting unit- Part 2-5: Measurement method for optical quantities of non-planar light sources need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ANSI/IES RP-29: Recommended Practice: Lighting for Hospitals and Health Care Facilities need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-31-20 Photometric Testing for Roadway and Area Lighting Luminaires Using Incandescent or High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
ANSI/IES LM-75-19 Approved method: guide to goniometer measurements and types, and photometric coordinate systems need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-72-20 Directional Positioning of Photometric Data need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-73-18 Photometric Testing of Entertainment Lighting Luminaires Using Incandescent Filament Lamps or High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
ANSI/IES LM-10-20 Photometric Testing of Roadway and Area Lighting Fluorescent Luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-66-20 Electrical and Photometric Measurements of Single-Based Fluorescent Lamp need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-20-20 Photometry of Reflector Type Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-35-20 Photometric Testing of Floodlights Using High Intensity Discharge or Incandescent Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-37-20 Guide for Determination of Average Luminance (Calculated) for Indoor Luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-41-20 Photometric Testing of Indoor Fluorescent Luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-45-20 Electrical and Photometric Measurements of General Service Incandescent Filament Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 70-1987 The Measurment of Absolute Luminous Intensity Distributions need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE S 010/E-2005 Photometry-the CIE System of Physical Photometry need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-46-20 Photometric Testing of Indoor Luminaires Using High Intensity Discharge or Incandescent Filament Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ANSI/IES LM-51-20 Electrical and Photometric Measurement of High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-11-20 Photometric Measurement of Searchlights Using Incandescent or HID Sources need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-78-20 Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-79-19 Electrical and Photometric Measurements of Solid-state Lighting Products need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 094-1993 Guide for floodlighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-82-20 Characterization of Optical and Electrical Properties of Solid-State Lighting Products as a Function of Temperature need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
CIE 015:2018 Colorimetry, 4th edition need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 088:2004 Guide for the lighting of road tunnels and underpasses, 2nd ed need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 070-1987 The measurement of absolute luminous intensity distributions need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 084-1989 Measurement of luminous flux need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-92-22 Optical and Electrical Measurement of Ultraviolet LEDs need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 043-1979 Photometry of floodlights need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-9-20 Electrical and Photometric Measurement of Fluorescent Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 102-1993 CIE recommended file format for electronic transfer of luminaire photometric data need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 114-1994 CIE Technical Collection in photometry and radiometry need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 115:2010 Lighting of Roads for Motor and Pedestrian Traffic need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 117-1995 Discomfort glare in interior lighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 121-1996 The photometry and goniophotometry of luminaries need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 127-2007 Measurements of LEDs need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 136-2000 Guide to the lighting of urban areas need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 180:2007 Road Transport Lighting for Developing Countries need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 190-2010 Calculation and presentation of unified glare rating tables for indoor lighting luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 194:2011 On Site Measurement of the Photometric Properties of Road and Tunnel Lighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
