+8618117273997weixin
English
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語

IEC 60983 Miniature lamps

This International Standard specifies requirements for miniature halogen and non-halogen
lamps with a nominal voltage up to 30 V and a nominal wattage up to 25 W. It covers:

– lamps to be used in road vehicles not subject to regulation and which therefore are not included in IEC 60809(section 2);

– lamps for electric torches (section 3);

– lamps for miners’ caplights (section 4).
Aircraft lamps are standardized in IEC 60434.

This standard specifies dimensional, electrical and photometric requirements as well as requirements concerning life and mechanical strength.

NOTE: Requirements are for production lamps. Individual lamps might not be completely within these requirements. Where conditions of compliance are required, they are specified in the relevant section.

For some of the requirements given in this standard, reference is made to “the relevant lamp data sheet”. For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor.

This Standard may also be used for future developments, e.g. where the light is produced by light emitting diodes(LED).
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

IEC 60050-845:1987, International Electrotechnical Vocabulary (IEV) – Chapter 845: Lighting

IEC 60061-1:1969, Lamp caps and holders together with gauges for the control of interchangeability and safety-Part 1: Lamp caps

IEC 60434: 1973, Aircraft electrical filament lamps
Amendment No. 1(1981), Amendment No. 2(1984)

IEC 60809:1985, Lamps for road vehicles – Dimensional, electrical and luminous requirements
Amendment No. 1(1987), Amendment No. 2(1989), Amendment No. 3(1992)

ISO 2859: Sampling procedures for inspection by attributes

EN 50033, Electrical apparatus for potentially explosive atmospheres – Caplights for mines susceptible to firedamp [European standards]

LISUN following instruments fully meet IEC 60983 Miniature lamps:

Leave a Message

Your email address will not be published. Required fields are marked *

=