LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
IEC 60434:1973 is a standard for aircraft electrical filament lamps. It specifies the technical requirements to ensure the quality and interchangeability of these lamps. The standard covers various aspects, including the design, manufacture, performance, and safety of the lamps. It defines the types and characteristics of the lamps, such as the structure, material, and temperature of the filament. It also sets safety requirements to prevent fires, electric shocks, and mechanical damage.
In addition, IEC 60434:1973 prescribes the performance standards of the lamps, including parameters like luminous flux, color temperature, and color rendering index. It provides guidelines for the design of lighting systems, including the installation position of the lamps and their compatibility with other aircraft components. The standard also includes requirements for the marking, packaging, transportation, and storage of the lamps to ensure their safety and reliability throughout the supply chain. Moreover, it describes the methods of test to be used and the conditions of compliance to judge if a batch of lamps is of acceptable quality.
LISUN supplies the fully test solutions for the following IEC 60434:1973, please see the below excel table:
| IEC 60434:1973 Clause and Subject | LISUN MODEL |
| 12. Ageing | SY2036 |
| 15. Life test and lumen maintenance requirements | LEDLM-84PL |
| 16. Vibration requirements | LVD-100KG |
| Annex | LPCE-2(9000C) |
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN provide full test solutions for HID lamp, including integrating sphere system, goniophotometer system, EMI EMC chamber, HID ballast tester, electrical safety test, etc.
Lisun can supply full test solutions for fluorescent lamp, including integrating sphere system, goniophotometer system, EMI EMC test, electronic ballast tester, electrical safety test, etc.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s LM-79 and LM-80 test solutions cover LED photometric, colorimetric, and lumen maintenance tests, meeting IES standards for accurate performance evaluation.
LISUN’s mobile and network test solutions include EMC/EMI testing, color glossiness measurement, IP waterproof/dustproof tests, IK impact tests, and environmental simulation, meeting international standards.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract Accurate lumen measurement is fundamental for lighting product development, quality control, and regulatory compliance. This paper presents a comprehensive analysis of seven essential lumen measurement...
Vibration test systems are core equipment in the research and development and quality inspection of industrial products. By simulating vibration states under different environments based on...
Precise optical measurements require the capability to acquire the light yield correctly, or repeatably. This is common with a sphere light source which is an integrating...
Photometric testing is still a critical need to light manufacturers, LED modules manufacturers, automotive lamp manufacturers, display manufacturers, and architectural lighting manufacturers. The possibility of defining...
Abstract This article focuses on the lumen maintenance test method for LED products, aiming to provide a detailed introduction to the testing principles, procedures, and practical...
Introduction The integrating sphere system is a cornerstone of optical testing, designed to measure the luminous, reflective, and transmissive properties of light sources, optical components, and...
Introduction The rapid advancement of LED lighting technology has transformed the illumination industry, making LED lamp testing equipment a critical tool for ensuring the quality, performance,...
Introduction Luminous flux is a fundamental photometric quantity that measures the total amount of visible light emitted by a light source over time. It serves as...
Introduction The rapid evolution of LED lighting technology has revolutionized the lighting industry, making LED luminaires the preferred choice for residential, commercial, and industrial applications due...
Introduction The rapid advancement of lighting technology has underscored the critical role of efficient and reliable lighting test equipment in the illumination industry. The LPCE-2 (LMS-9000)...
Introduction The widespread adoption of LED lighting technology has transformed the lighting industry, establishing LED luminaires as the preferred choice for modern illumination due to their...
Introduction As LED lighting technology continues to advance rapidly, the demand for precise performance testing of lighting products has grown significantly, particularly for key metrics such...
Introduction In the realm of color measurement and material analysis, precision and accuracy are paramount. Among the various instruments designed for these purposes, sphere spectrophotometers stand...
Abstract Vibration testing is a crucial element in validating the reliability, structural integrity, and durability of components and finished products throughout their operational lifespan. This paper...
The demand for reliable and energy-efficient LED lighting products has surged in recent years, emphasizing the importance of rigorous testing standards. The LED Lumen Maintenance and...
The vibration test machine plays a crucial role in the fields of product development, quality control, and environmental testing. Among the leading technologies in this area...
Introduction In industries ranging from automotive to aerospace and electronics, the ability of components and finished products to withstand vibrations is a critical factor for ensuring...
This paper explores the role of electrodynamic shaker, particularly focusing on the LISUN LVD-100KG Electrodynamic Vibration Generator System. Electrodynamic shakers are widely used in various industries...
In recent years, with the growing energy crisis and the increasing awareness of environmental protection, LED bulbs have become a popular choice as energy-efficient lighting products....
With the development of technology, LED lighting has been widely used in the field of illumination. In order to ensure the quality and performance of LED...
As an emerging light source, LED is very different from the traditional light source in terms of its own structure and luminous characteristics. Due to the...
Introduction Spectroradiometer integrating sphere systems are now standard equipment for researchers working in the area of light measurement and characterization. These cutting-edge devices are vital for...
Lumen is a unit of measurement for the total amount of visible light emitted by a light source. It is an important parameter in lighting design...
Integrating sphere, also known as a LED Measurement System, is a hollow spherical shell. Integrating spheres are usually made of metal materials and have an inner wall...
Introduction High precision spectroradiometer integrating sphere systems rely heavily on temperature regulation to get precise and repeatable readings. Temperature fluctuations may cause measurement inaccuracies and inconsistencies...
Vibration exciters used in vibration laboratories are vibration generators. When selecting vibration generators, suitable types should be selected according to the test frequency range. Electro-hydraulic vibration...
What is a integrating sphere: The integrating sphere is also known as a hollow sphere with a highly reflective inner surface. It is mainly a high-efficiency...
Integrating Spheres can conveniently lumen measurement and test radiation power of light sources, thus it can be used for testing various lighting products. What is an...
Introduction As part of the effort to locate dependable sources of energy for the long term, novel approaches to energy production have been researched. Electrodynamic vibration...
Introduction There is a considerable amount of unrealized potential in the form of vibrational energy that is produced by things like factories and automobiles and by...
LPCE-2(LMS-9000C) Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric,...
LPCE-2 (LMS-9000B/A) Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its...
SY2036 LED aging and life test rack is fully designed according to the IEC standards, and it can also be designed based on the customer request....
LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table is according to IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 and other relevant standards. • LVD-100KG: Combined the Vertical and Longitudinal total 4 directions in...
The inside of an integrating sphere is hollow and coated with a highly reflective white material. One may use such led testing equipment to determine the...
Origin and development of integrating sphere: The use of integrating sphere in measuring luminous flux can be traced back to 1890, and now it has become...
LEDLM-80PL LED Lumen Maintenance and Aging Life Test System is designed according to IES-LM-80 and TM-21, it used to test & record the optical and electrical Maintenance for single...
It’s important to run testing on LED aging. Without an aging test, it is impossible to ensure the product’s quality, and unreliable elements will show up...
The terms “shaker table” and “vibration table” can refer to a variety of things in the field of vibration testing. Shaker tables are used for a...
Integrating sphere is a straightforward but frequently misunderstood spectrophotometer accessory for measuring optical radiation. Its job in scatter transmission and diffuse reflectance sample studies is to...
Integrating sphere is a kind of sphere that can be used to test: luminous flux, color temperature, light effect and other parameters of light source. Its...
A light-scattering substance, such as barium sulfate, is used to make the sphere’s spherical inner surface and inner wall. The light beam (measurement light) entering the...
Integrating sphere is a hollow sphere with white diffuse reflective material on its inner wall, which is also called photometric sphere, luminous flux sphere, etc. One...
The integrating sphere system is composed of spectrometer, standard light source, DC power supply, AC power supply and digital power meter, which provides the calibration of...
Integrating sphere, also known as luminous sphere and photometric sphere, is a hollow and complete spherical shell. The integrating sphere is mostly made of metal materials,...
What is solid-state lighting product (SSL) measuring SSL includes LED and oled With the elimination of incandescent lamps and the gradual withdrawal of high-pressure mercury lamps,...
Sunlight is essential for plants, because plants need to rely on sunlight for photosynthesis. We all know that sunlight is a continuous spectral light source, and...
IEC (International Electrotechnical Commission) is the earliest international standardization organization in the world. It was established in 1906 to enhance international mutual understanding and hope that...
LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric,...
Introduction to integrating sphere An integrating sphere, also called an Ulbricht sphere, is an optical component consisting of a hollow cylindrical cavity with a diffuse white...
Meta Description: Integrating spheres manufactured by LISUN are used for multiple purposes. This article will help you understand its various applications. An integrating sphere (also known...
The electro-optical test methods allowed by IESNA Solid State Lighting Products, specifically referred to as LM-79, are jointly developed by IESN and the ANSI Solid State...
1.Light formation 1.1 Introduction Light formation refers to the formation process of organ form structure in the plant life cycle; optical aspirations refer to the process...
Integrating sphere The Ulbricht sphere is also known as the integrating sphere. Richard Ulbricht, a German engineer, inspired the Ulbricht sphere. To determine the best lighting...
What is an integrating sphere? If your application requires a widely diverging beam measurement, an integrating sphere might be the right solution. An integrating sphere is...
In September 2020, the DLC released the official version of the Grow Light V2.0 standard, which will be implemented on 21st, March, 2021. Prior to this,...
LED test instruments or LED Lamp Testing Equipment includes • LPCE-2(LMS-9000) High Precision Spectroradiometer Integrating Sphere System. • EN62471-C Optical Radiation Safety Test. • LEDLM-80PL LED...
The use of LEDs has increased with the advancement of technology. So, in order to meet today’s needs LEDs must be thoroughly evaluated. This is done...
Introduction Any lamps and lanterns may have “flicker“ when connected to AC power! Unless you don’t use batteries or transformers, lighting fixtures cannot avoid “strobe“, which...
An integrating sphere makes it easy to measure samples. Integrating sphere measurements can be taken for different samples. This article will explain integrating sphere and the...
On 9th ,October, 2018, the Illuminating Engineering Society of North America (IES) released a new version of the light source color quality evaluation standard – IES...
For Windows 7/8 USB driver coding, Microsoft explicitly requires drivers to use EV code signature, and after Windows 10/11, the EV coding signature is not enough...
Vibration test is to simulate the various vibration environment impacts encountered by the product in the transportation, installation. This test is to simulate the various impacts...
Integrating sphere is a light collecting device. Illumination or measurement sources may be made from the gathered light. So, light enters the sphere, reflects off the...
Integrating spheres are one of the fundamental devices for light sources, lamps, and luminaries measurement. An integrative sphere is also traditionally called the Ulbricht sphere, and...
The computer completely controls modern measurement systems. A single user interface controls the measurement system with extra components and an additional light source to offset the...
Optical radiation is measured using the integrating spheres, which is the most popular and frequently used instrument for this purpose. It is intended to produce a...
The lumen may measure the entire “amount” of visible light at a specified beam or angle or produce from a source. The amount of candelas or...
LEDs have opened up new levels of freedom of design which enable architects and designers to free up their creativity. Light-emitting diodes provide many design options...
Lighting, everything is about lumens. But precisely what are lumens? And how do you comprehend what light bulbs and light fittings contain? And if you want...
The integrating sphere is a rounded device having a reflecting covering on its interior. It usually contains a light source and measures its total flux output....
On 5th , December, 2019, the European Commission officially announced the new ErP Regulation (EU) 2019/2020 and Energy Efficiency Labelling Regulation (EU) 2019/2015 for lighting products, which...
The ERP directive EC 244/2009, EC 245/2009, EU 1194/2012 and the energy efficiency labeling directive EU 874/2012 have been implemented for many years. The European Union...
At present, ErP has issued new regulations (ErP Regulations (EU) 2019/2020 for Lighting Products and Energy Efficiency Labelling Regulations (EU) 2019/2015) on 5th December, 2019. The...
The ErP directives EC 244/2009, EC 245/2009, EU 1194/2012 and the energy efficiency labeling directive EU 874/2012 have been implemented for many years. The EU has...
IEC 60068-2-6 <Environmental testing –Part 2-6: Tests – Test Fc: Vibration (sinusoidal)> consists basically of subjecting a specimen to sinusoidal vibration over a given frequency range...
1. Introduction of flicker parameter Flicker (light source flicker) means that the light output of the lighting source fluctuates with a certain frequency. At present, the...
On 5th, December, 2019, the European Commission officially announced the new ErP Regulation (EU) 2019/2020 and Energy Efficiency Labelling Regulation (EU) 2019/2015 for lighting products, which will...
LISUN will irregularly update the software of LPCE-2（LMS-9000）Spectroradiometer & Integrating Sphere Test System. However, since each spectroradiometer LMS-9000 in the system has its own independent hardware...
LED lamp aging test standards: Generally speaking, as a green energy-saving LED lamp, if the performance test is reduced before use, there will be a certain...
With the rapid development of the automobile industry and the improvement of driving speed, it is very necessary to establish various standards and regulations to regulate...
Ultraviolet rays are rays of sunlight with a wavelength of 100 to 400 nanometers (nm). English is ultraviolet, ultra- means above, beyond. The frequency of ultraviolet...
Ultraviolet lamps are a type of light source that can produce ultraviolet light with a large effective range. In fact, there are also ultraviolet rays in...
Medical ultraviolet lamps mainly sterilize indoor air. There are two methods: indirect irradiation and direct irradiation. Indirect irradiation method: the use of high-intensity ultraviolet air sterilizer...
Ultraviolet sterilization is a traditional and effective disinfection method. It has been widely used in hospitals, food factories, water treatment, etc. However, it is affected by...
According to the provisions of IESNA-LM-79-08, both the integrating sphere system and the goniophotometer can test the luminous flux and color parameters of SSL products. In...
The European Commission has formulated the official version (EU) 2019/2015 of the new regulations on energy efficiency labels for light sources on March 11, 2019, which...
LM-79-19 English Version Free Download: Click Here LM-79-19 Spanish Version Free Download: Click Here LM-79-19 Chinese Version Free Download: Click Here ANSI (American National Standards Institute)...
LM-79-19 English Version Free Download: Click Here LM-79-19 Spanish Version Free Download: Click Here LM-79-19 Chinese Version Free Download: Click Here This article tries to make...
Fair: HKTDC Hong Kong International Lighting Fair 2019 (Autumn Edition) Date: 2019/10/27-2019/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong...
Fair: LED Expo New Delhi Date: 2019/11/14-2019/11/16 City: New Delhi Exhibition Hall: India Expo Centre, Great Noida, India Organizers: messe frankfurt Booth of LISUN: L45 LISUN...
Fair: HKTDC Hong Kong International Lighting Fair 2019 (Autumn Edition) Date: 2019/10/27-2019/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong...
HID lamp is high intensity discharge lamp. High pressure sodium lamp, high pressure mercury lamp, xenon lamp, metal halide lamp are all belong to HID lamp....
Recently Saudi Arabia released new LED standard SASO 2902 for energy efficiency, functionality and labeling requirements for Lighting products. We have got the SASO 2902 in 2017 which is draft...
If you need to disable the 64bit digital signature enforcement of the computer, follow the steps: For Win 7 system There are two ways and you...
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
In optical testing, the measurement of luminous flux and color temperature are essential. There are two test equipment for the measurement: Integrating Sphere Testing System and Goniophotometer. Here we...
The main parameters of LED lamps and lanterns include: A: Electric parameters: voltage, current, lamp power, power factor, harmonic, etc B: Colorimetric parameters: correlated color temperature,...
In recent years, the CE marks are more and more widely used in the market of European economic area (Member states of the European Union and...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
High frequency fluorescent lamp came out in 1990. Fine tube, small current and high power is the distinct features. Because of the above design structure, high...
According to the requirements of the LM-79 optical testing standards applicable to the widest range in the world, although there are many photometric measurements for light...
Energy Star certification (Energy Star certification) is a certification which can adapt to the requirements of the United States Energy Department. In addition to UL, FCC...
With 4.0 concepts emerged on the industry, the traditional mind of manufacturing is experiencing unprecedented impact, integration and upgrade of industrialization and information will be the...
ISO 17025 is the international standard for laboratory accreditation services; the latest version is released in May, 2005. The full name of ISO/IEC 17025:2005-5-15 is Accreditation...
With the rapid development of LED lighting market, the competition becomes more and more intense. So more and more LED lighting manufacturers began to focus on...
Color difference is an important indicator of lighting lamps color performance. Color difference is the difference between computer calculation forma and the target standard, calculated by...
LED luminaires are this kind of device which can transmit, distribute, and change the light distribution of light source. They are becoming the main products of...
Compare LED efficiency and life, the conception of efficiency is more complex. Firstly, there are three kinds of general efficiency, please check the Diagram 1. ...
From the perspective of the LED product structure and technology development, the quality criteria of LED product mainly consider the parameters of the optical properties, electrical...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
Spectrum is the relative distribution of wavelength and light intensity. The spectrum of LED is generally monochromatic LED, such as blue LED with a peak wavelength...
LED Expo Delhi is a 3 day event being held from 30 November to the 2 December 2017 at the Pragati Maidan in New Delhi, India....
Interlight Moscow is held from November 7 to 10, 2017, Interlight Moscow is not only the biggest show in Russia and Eastern Europe covering the whole...
Thailand International Lighting Fair is the most influential international professional lighting fair in Thailand. Fair Dates: 16-18 November 2017 Fair Venue: Bangkok International Trade & Exhibition...
Interlight Moscow powered by Light + Building is the only trade fair in Russia and the CIS covering the whole range of products relating to above stated...
The Hong Kong International Lighting Fair has become the largest industry exhibition in Asia, and the second largest in the world. LISUN participates this exhibition every...
The Istanbul Lighting Exhibition is the only professional LED application exhibition in Turkey, where all the players in the lighting industry come together under a same...
HKTDC Hong Kong International Lighting Fair (Autumn Edition) 2017, organized by the Hong Kong Trade Development Council at the Hong Kong Convention and Exhibition Centre (HKCEC)...
Istanbul Light is an international platform, where all the players in the lighting industry come together under a same roof and where the latest technologies and...
In September and October 2013, Chairman Xi put forward a major initiative of building “The Silk Road Economic Belt” and “The 21st Century Maritime Silk Road” (referred to...
The Spectroradiometer Integrating Sphere System, there are two important parts: one is measuring and analysis; another is assistant part which providing testing environmental. Here we will...
Intelligent Lighting is the distributed lighting control system by using internet of things technology, wired/wireless communication technology, power line carrier communication technology, and embedded computer intelligent...
Light environment is one of the indispensable and important physical environmental factors for plant growth and development. LED plant lighting lamp is a kind of artificial...
IES LM-79 “Electrical and Photometric Measurement of Solid-State Lighting Products” as the exclusive international standard for measuring the total luminous flux, electrical power, luminous intensity distribution...
LED adopts metal material, however, OLED uses organic material. Their emitting principles are the same, the difference is that OLED does not need backlight, because it...
Integrating sphere is a hollow sphere with high reflectance surface, it is widely applied in testing lumen, chromaticity coordinates, CCT, dominant wavelength and peak wavelength etc...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
IES LM-79-08 Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products. IES LM-79 standard is mainly for photoelectric performance measurement. Generally it is for whole...
Integrating Sphere is a hollow sphere which inner surface coated with white diffuse material. There are one or several apertures on the wall of the integrating...
Spectroradiometer & Integrating Sphere System as main test device to measuring LED lamps, it’s as a most important device to judge the quality of lighting products....
Nowadays, with the development of LED industry, its technology continues to be mature and has widely applied at home and abroad. Comparing to mature markets in...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
India lighting market develops rapidly, research reports point that LED lighting market scale will reach 1.14 billion dollars, growth 47.1%. India government intends to make India...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
IESNA-LM-79 (Electrical and Photometric Measurements of Solid-State Lighting Products) is a standard made by Illuminating Engineering Society of North America; this standard put forward the measurement...
LED has the features of long life, but with the different working condition and drive current, its life will be different, but generally the life will...
LED is short for light emitting diode. It is one kind of semiconductor diodes, which can convert electrical energy into energy. With the technology development, LED...
Nowadays, there are two main categories of LED light sources classified according the forms on the market, one is COB integrated light source directly combined of...
IES TM-30-15 is a document approved by the Illuminating Engineering Society (IES) that describes a method for evaluating light source color rendition. The method encompasses several...
LED manufacturers must learn some basic luminaries’ parameters such as brightness, spectrum and color temperature and so on as standard to identify pros and cons. We...
At the end of October 2016, Lisun attended lighting fair in as in previous years. Hongkong International Lighting Fair has been an ideal platform for LED...
In October 5th-7th 2016, New Delhi LED lighting exhibition held in New Delhi, the capital of India. As one of India’s largest LED lighting exhibition, New...
SSL (Solid State Lighting) product’s color quality is very important; people pay more and more attention to it. CRI already has 40 years history. CIR is...
Different color temperature will give us a different feeling. In a different environment with the same brightness, the object’s color we can see will be a...
Now, the led COB package, in fact, we can know that most of the COB package, including Japan COB packaging technology, they are based on the...
Lisun has a lab certer in Shanghai. Are you worry about the quality of LED that you purchase from China? From today, you can ask your...
The ninth Frankfurt Light + Building(2016) was hold in Germany Frankfurt exhibition center (Messe Frankfurt). The biennial global lighting event attracted about 2500 companies exhibitors from...
When LEDs arrived on the market, their tremendous efficiency and money saving potential changed the playing field and lumens, lux and candela finally became obsolete metrics...
Due to the demand of Lisun market business expand, and kind invitation from AUTOMATE PROCESS CONTROL, on 9:00am April 23, 2016, Lisun & AUTOMATE organized customer...
Lisun will come with professional technical team to attend 2016 Germany Frankfurt Lighting Fair( Light + Building) dated on 13th Mach ~18th March, 2016. This time...
The 2015 New Delhi Autumn LED Expo was successfully held during 3th December~5th December. As one of India biggest exhibition, this exhibition main relate different lighting...
1. Japanese Lighting Market According to Japan’s Lighting Industry Association (JLMA) statistics, lamps and lighting product development trend will be more and more closed to LED...
CIE has recently published the first international measurement standard for LED Lamps, LED Luminaires and LED Modules, ie. CIE S025(http://div2.cie.co.at/?i_ca_id=563). CIE Division 2 will present a...
1. According to the reflectivity of the internal coating: Note: It can select the coating according to the test requirement, the default is the BaSO4 coating....
LED coated with phosphor powder on the LED chip to achieve white light emission. There are three main methods to realize white light with phosphor powder,...
As well as we know that for the LED luminaires lumen test, the CIE121: 1996 Clause 6.1, CIE127-2007 Clause 6.2 and IES-LM-79-08 Clause 9.0 are mentioned...
It is the second time we have attended the fair, and it is a successful and wonderful fair. Lisun’s booth attracks numerous people’s visit.
Lisun agency in Korea attended the exhibition last week. The exhibition is organized every year in KINTEX since 2003. It is one of the most influential...
During the exhibition, Lisun showed its main instruments which attracted many customers to stop and talk. Among them, there are not only many old customers hope...
During the measurement of luminous flux with integrating sphere, comparing with common lighting source, the luminous flux test accuracy of LED lighting source have given huge...
The ideal integrating sphere paint should have below performances: 1. High-Lambert characteristics (good diffuse reflection characteristics) 2. High reflectance in a wide wavelength range 3. High...
According to IESNA-LM-79-80, when spectroradiometer integrating sphere system tests LED flux, light source’s self-absorption can influence test result, therefore, it usually introduces Auxiliary Lamp. The induction...
As far as we known that there have several type spectroradiometer, such as CCD spectroradiometer, mechanical scanning spectrophotometer etc. Generally, the type of spectrometer depend on...
As we known that the quality of LED products depend on lumen, lumen efficiency temperature and CRI etc parameters, the general test device is application with...
As in previous year, Lisun and its instruments appeared at booth ED-A01 of Hong Kong International Lighting Fair (Autumn Edition) during 27th October to 30th October....
Light object by the lighting source and standard source(Generally, sunlight is as the standard source), the degree consistent with color is the color fidelity degree, represented...
Due to the LED luminaries such as LED street luminaries developed, to do 4π geometry testing, it is hard to be hold in the traditional integrating sphere design....
LED testing equipment mainly has Goniophotometer and Integrating Sphere Spectroradiometer System. Goniophotometer is used for light intensity distribution measurement; integrating sphere spectroradiometer system is used for flux and colorimetric...
A lamp is composed of one or more luminous light sources with a shell (namely lamps, for example, some down lamp can be installed in one...
Integrating Sphere plays the role in below three aspects. 1. Optical Receiver The measured light enters the sphere through the hole of integrating sphere. We set up...
Fair: Hong Kong International Lighting Fair 2013 (Autumn Edition) Date: 2013/10/27-2013/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong Trade...
OLED (Organic Light Emitting Display) is a new generation of flat panel display technology after LCD, LED, CRT and PDP (Plasma Display Panel). It has significant new...
Abstract: According to the particularity of LED luminous flux measurement, unique optimization is adopted in the design of the integrating sphere for LED measurement combined with the diffuse materials...
Lisun attended Hongkong Lighting Fair dated 27th October to October 30th 2012, during the exhibition, Lisun showed many high excellence testing equipments to visitors, like Goniophotometer,...
Fair: Hong Kong International Lighting Fair 2012 (Autumn Edition) Date: 2012/10/27-2012/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong Trade Development...
When you measure the photometric and chromaticity properties of optical system, it must be under the uniformly prescribed light source, the test result can be compared...
In order to expand its business, Lisun decides to move Lisun Electronics Shanghai to a new office. Lisun built a high level products show room &...
Lisun updated the Spectrophotometer of LMS-5000 software. The new version software updated serval function to make the customer have a much experience. LMS-5000 is a high accuracy...
1.LED In addition to the semiconductor lasers, when the current motivates the semiconductor diodes can emit the optical radiation. Strictly speaking, the term LED should be...
Our manufactory will attend the Guangzhou International Lighting Exhibition on June 9th~12th, 2011 About LISUN: it is lead in CFL and LED test instruments, main products are EMC Test System,...
LPCE-2(including spectrophotometer, integrating sphere) is designed for analyzing the photometry, colorimetry and electricity of LED lamp, energy-saving lamp, fluorescent lamp, high-voltage sodium lamp, high-voltage mercury lamp, metal...
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
Our manufactory will attend the Guangzhou International Lighting Exhibition on June 9th~12th, 2009. By then we will show our new products such as RoHS Test Equipment (Energy Dispersive...
Lisun Hong Kong, Shanghai and China Factory office will be off to enjoy the Chinese New Year Holiday from 24th, Jan to 1st, Feb. If you...
During October 12nd to 15th, Lisun will exhibit in the 2008 Hong Kong Global Sources Fair in booth# 11M30 (Hall 9&11) near the Hong Kong International...
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
