IEC 61326-1:2020 is the general EMC standard for measuring, control and laboratory electrical devices below AC 1000 V / DC 1500 V. It sets unified conducted...
EN 14604:2005 is a harmonized European standard specifying all test requirements for residential smoke alarm devices powered by mains or battery, covering mechanical, climatic, chemical ageing,...
UL 217:2024 (10th Edition) is the latest ANSI/UL safety standard governing electrically operated single/multiple‑station smoke alarms and portable travel alarms for indoor open‑area protection, recreational vehicles,...
UL 2075:2021, published by Underwriters Laboratories (UL) and updated in August 2021, is a safety standard covering fixed, portable, and transportable toxic and combustible gas/vapor detectors...
UL 2034:2024 is the latest US safety standard for single and multiple station interconnected carbon monoxide (CO) alarms. It sets mandatory electrical safety requirements for CO...
This International Standard IEC 61643-11:2011 specifies the general requirements for low‑voltage surge protective devices (SPDs) connected to low‑voltage power distribution systems. It defines terms, classification, operating...
IEC 60255-1:2022 establishes the general technical requirements for measuring relays and protection equipment used in power systems. It defines basic terms, rated values, construction, safety, insulation,...
IEC 60664-1:2020 is the core international standard for insulation coordination of low-voltage electrical equipment (AC ≤1000 V, DC ≤1500 V, frequency ≤30 kHz). It sets out...
ANSI C 136.10-2006 is an American National Standard specifically formulated for locking-type photocontrol devices and their mating receptacles used in roadway and area lighting equipment. It...
CISPR 14-2:2020 is a product family standard under the International Special Committee on Radio Interference (CISPR), dedicated to the electromagnetic immunity requirements of household appliances, electric...
As a revised edition released in 2023, IEC 61869-1:2023 supersedes the 2007 version of the same standard as well as IEC 61869-6:2016, updating technical content to...
IEC 60730-1:2010 defines general safety and performance requirements for automatic electrical controls used in or with household and similar equipment, encompassing energy sources like electricity, gas,...
UL 1447:2020 is a safety standard developed by Underwriters Laboratories (UL) for electric lawn mowers, covering both corded (rated voltage ≤250V) and battery-powered models. It specifies...
CISPR 14-2:2015 specifies the electromagnetic immunity requirements for household appliances, electric tools, and similar apparatus. It applies to devices with a rated voltage not exceeding 250V...
IEC 62841-1:2014 “Electric Motor-Operated Hand-Held, Transportable Tools and Lawn and Garden Machinery – Safety – Part 1: General Requirements” establishes foundational safety guidelines for handheld and...
IEC 60745-1:2006 is a pivotal standard that details the safety requirements for hand-held motor-operated electric tools. Applicable to tools with single-phase AC/DC voltage up to 250V...
IEC 62115:2017 Electric toys—Safety is an international standard established by the International Electrotechnical Commission (IEC), specifying safety requirements for electric toys designed or intended for use...
IEC 62041:2010 sets forth the electromagnetic compatibility (EMC) requirements for transformers, power supplies, reactors, and similar products. This standard covers a wide range of equipment, including...
The IEC 61547:2020 standard specifies the electromagnetic compatibility (EMC) immunity requirements for equipment intended for general lighting purposes. It applies to lighting devices such as LED...
IEC 62052 – 31:2024 is a standard about electricity metering equipment formulated by the International Electrotechnical Commission (IEC). It specifies general safety requirements and associated tests,...
IEC 62052-11:2020 focuses on the type testing specifications for electricity metering equipment used in alternating current (AC) systems. It applies to newly manufactured equipment used for...
IEC 60662:2002 is an international standard that specifies performance requirements for high-pressure sodium vapor lamps used in general lighting. This standard outlines technical specifications, including terms...
IEC 62052-11:2003 specifies general requirements, tests, and test conditions for AC electricity metering equipment. It covers aspects such as functionality, mechanical structure, electrical characteristics, and marking...
IEC 62640:2011 specifies requirements for residual current devices (RCDs) with or without overcurrent protection intended for household and similar applications. These devices are designed to provide...
IEC 61058-1:2016 is available as IEC 61058-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to...
This International Standard IEC 60840:2011 specifies test methods and requirements for power cable systems, cables alone and accessories alone, for fixed installations and for rated voltages...
The IEC 62052-11 standard specifies the general requirements, testing methodologies, and test conditions for electricity metering equipment used in alternating current (AC) systems. It covers essential...
This European Standard EN 61547: 2009 has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and...
The standard covers safety requirements for electrical appliances that operate with a voltage up to 250V for single-phase appliances and up to 480V for other appliances....
The purpose of this document IEC 60947-1:2020 is to harmonize as far as practicable all rules and requirements of a general nature applicable to low-voltage switchgear...
The IEC 61439-1: 2011 standard, titled “Low-voltage switchgear and controlgear assemblies – Part 1: General rules”, specifies the general requirements for low-voltage switchgear and controlgear assemblies....
IEC 61000-4-5 defines test methods for evaluating the surge immunity of electrical and electronic equipment when subjected to high-energy disturbances caused by switching and lightning transients.
The BS 1363 series provides essential requirements for the safety, construction, dimensional accuracy, electrical and mechanical testing, and markings for the UK national electrical power plug...
IEC 60335-1:2020 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances...
This part of ISO 4064|OIML R 49 sets out details of the test programme, principles, equipment and procedures to be used for the type evaluation, and...
SAE ARP4087DWing Inspection Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIBSE Lighting Guide LG2: Lighting for healthcare premises
IEC 60601-2-18Medical electrical equipment- Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment need to use LISUN goniophotometer, integrating sphere and...
SAE ARP694DAerial Refueling Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.37Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power-driven vehicles and of their trailers need to use LISUN...
MIL-STD-3009LIGHTING, AIRCRAFT, NIGHT VISION IMAGING SYSTEM (NVIS) COMPATIBLE need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SAE ARP5825Design Requirements and Test Procedures for Dual Mode Exterior Lights need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-002Aerospace series – Lamps, incandescent – Part 002: Main characteristics need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-003Aerospace series – Lamps, incandescent – Part 038: Lamp, code 44 – Product standard need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
EN 2756 Aerospace series — Lamps, incandescent — Tests methods need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-001Aerospace series – Lamps, incandescent – Part 001: Technical specification need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.65UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SPECIAL WARNING LAMPS FOR MOTOR VEHICLES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ISO 7137Aircraft- Environmental conditions and test procedures for airborne equipment need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-5Display lighting unit- Part 2-5: Measurement method for optical quantities of non-planar light sources need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ANSI/IES LM-66-20 Electrical and Photometric Measurements of Single-Based Fluorescent Lamp need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-20-20 Photometry of Reflector Type Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-45-20 Electrical and Photometric Measurements of General Service Incandescent Filament Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE S 010/E-2005 Photometry-the CIE System of Physical Photometry need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-51-20 Electrical and Photometric Measurement of High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-78-20 Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-79-19 Electrical and Photometric Measurements of Solid-state Lighting Products need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 094-1993 Guide for floodlighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 015:2018 Colorimetry, 4th edition need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-82-20 Characterization of Optical and Electrical Properties of Solid-State Lighting Products as a Function of Temperature need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 088:2004 Guide for the lighting of road tunnels and underpasses, 2nd ed need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 084-1989 Measurement of luminous flux need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-92-22 Optical and Electrical Measurement of Ultraviolet LEDs need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-9-20 Electrical and Photometric Measurement of Fluorescent Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 194:2011 On Site Measurement of the Photometric Properties of Road and Tunnel Lighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 127-2007 Measurements of LEDs need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 114-1994 CIE Technical Collection in photometry and radiometry need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test