IS 10322-1:2014 is the Indian national standard corresponding to the general specification and test provisions for all types of luminaires, establishing unified baseline safety, construction and...
The IEC 60320-1:2007 standard specifies general requirements for appliance couplers intended for household and similar general purposes. These couplers are primarily used for connecting electrical appliances...
ANSI/UL 1484:2025 (6th Edition, published April 28, 2025) is a safety standard for electrically operated fuel gas alarms used in residential settings and recreational vehicles (RVs)....
UL 817:2025 (13th Edition) is the ANSI/UL safety standard for cord sets and power‑supply cords rated up to 600 V, used in non‑hazardous indoor locations per...
UL 2034:2024 is the latest US safety standard for single and multiple station interconnected carbon monoxide (CO) alarms. It sets mandatory electrical safety requirements for CO...
This International Standard IEC 61643-11:2011 specifies the general requirements for low‑voltage surge protective devices (SPDs) connected to low‑voltage power distribution systems. It defines terms, classification, operating...
UL 62275:2025 sets strict safety and performance standards for electrical installation cable ties, classifying them into Type 2/21/2S/21S with tiered testing requirements. It mandates mechanical strength...
UL 746C:2001, issued by Underwriters Laboratories (UL) as the fifth edition on November 29, 2001 (ANSI-approved September 23, 2002), is a safety standard that establishes evaluation...
IS 16102 (Part 1): 2026 is the latest Indian standard specifying safety requirements for self‑ballasted LED lamps used for general lighting services. Compared with the previous...
UL 2556:2021 is a safety standard specifying test methods for evaluating the electrical, mechanical, thermal and flammability performance of wires and cables. It defines uniform testing...
IEC 60664-1:2020 is the core international standard for insulation coordination of low-voltage electrical equipment (AC ≤1000 V, DC ≤1500 V, frequency ≤30 kHz). It sets out...
ANSI C 136.10-2006 is an American National Standard specifically formulated for locking-type photocontrol devices and their mating receptacles used in roadway and area lighting equipment. It...
The standard EN 60745-1:2003, “Hand-held motor-operated electric tools — Safety — Part 1: General requirements,” outlines the safety specifications for hand-held electric tools powered by motors....
IEC 60335-2-6:2024 is a safety standard focusing on stationary electric cooking appliances for household and similar use, including cooking ranges, hobs (e.g., induction cooktops), ovens (pyrolytic,...
IEC 60730-1:2010 defines general safety and performance requirements for automatic electrical controls used in or with household and similar equipment, encompassing energy sources like electricity, gas,...
UL 1447:2020 is a safety standard developed by Underwriters Laboratories (UL) for electric lawn mowers, covering both corded (rated voltage ≤250V) and battery-powered models. It specifies...
ANSI/CAN/UL 2849:2022 is a key safety standard for electrical systems of electric bicycles. It comprehensively covers multiple aspects of electrical safety, including insulation performance, short-circuit protection,...
IS 1293:2019 is India’s national standard (by BIS) for household and similar-purpose plugs and socket-outlets with rated voltage ≤250V and rated current ≤16A. Its primary aim...
IS 3854:2023 is India’s national standard (by BIS) for domestic and similar-purpose switches. It applies to manual AC switches (up to 250V, 20A) used in homes,...
IEC 60983:2005 is an IEC-released international standard for miniature lamps, combining its 1995 2nd edition and 2005 Amendment 1 (IEC 60983:1995+AMD1:2005 CSV) with validity through 2025....
IEC 60810Lamps, light sources and led packages for road vehicles- Performance requirements need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 60601-1:2005 is a standard that specifies the general requirements for the basic safety and essential performance of medical electrical equipment. It applies to various types...
International standard IEC 61010-1 specifies safety requirements for a variety of electrical systems, including test and measurement, industrial process control, and laboratory equipment. The purpose of...
UL 496:2013 is a safety standard governing lampholders for incandescent, fluorescent, and other discharge lamps, along with related parts like lamp shade holders and GU24/GU24-1 bases...
IEC 60838-1:2020 is an international standard developed by the International Electrotechnical Commission (IEC) that specifies general requirements and corresponding test methods for miscellaneous lampholders. Released in...
In addition, IEC 60400:2004 also details the specific test methods. These testing procedures are utilized to verify the compliance of lampholders and starter – holders with...
IEC 60238:2020 focuses on key performance and safety criteria, such as electrical insulation resistance, contact conductivity (typically requiring corrosion-resistant materials like brass for current-carrying parts), and...
The UL44 standard primarily specifies requirements for thermoset-insulated wires and cables, aiming to ensure their safety and reliability. Its scope of application covers single-conductor and multi-conductor...
UL 83:2017 STANDARD FOR SAFETY – Thermoplastic – Insulated Wires and Cables specifies the requirements for 600V single – conductor thermoplastic – insulated wires and cables....
The IEC 61029-1:1990 standard, titled “Safety of transportable motor-operated electric tools – PART 1: General requirements”, focuses on establishing comprehensive safety norms for portable electric tools....
IEC 60745-1:2006 is a pivotal standard that details the safety requirements for hand-held motor-operated electric tools. Applicable to tools with single-phase AC/DC voltage up to 250V...
ASTM F963:2023, titled “Standard Consumer Safety Specification for Toy Safety”, is a pivotal standard developed by ASTM International. It is designed to comprehensively address the safety...
EN 71-1:2014 is a European standard that specifies the safety technical requirements for the mechanical and physical properties of toys intended for children under 14 years...
IEC 61558-1:2017 is a safety standard developed by the International Electrotechnical Commission (IEC) for transformers, reactors, power supply units, and their combinations. It applies to various...
IEC 62052 – 31:2024 is a standard about electricity metering equipment formulated by the International Electrotechnical Commission (IEC). It specifies general safety requirements and associated tests,...
IEC 60838-1:2020, titled “Miscellaneous Lampholders – Part 1: General Requirements and Tests,” specifies the general requirements and testing methods for various types of lampholders intended for...
IEC 60065:2014 outlines safety requirements for audio, video, and similar electronic devices, aiming to protect users from electrical, mechanical, and thermal hazards.
IEC 61347-1:2024 specifies the general safety requirements for controlgear used with electric light sources, including fluorescent lamps, LED modules, discharge lamps, and other lighting technologies.
This standard IEC 61195:2014 applies to double-capped fluorescent lamps, including general lighting and high-efficiency types. It sets requirements for mechanical structure, electrical performance, and protection against...
This standard IEC 60598-2-10:2003 applies to portable luminaires designed for children’s use, such as bedside lamps and toy lamps. It requires that the luminaire structure avoids...
The IEC 62271-1:2017 standard specifies the common requirements for high-voltage alternating current switchgear and controlgear with rated voltages above 1 kV. It covers general specifications for...
IEC 61058-1:2016 is available as IEC 61058-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to...
For switches provided with screwless terminals, the rated current is limited to 16 A. This fourth edition cancels and replaces the third edition published in 1998,...
IEC 60570:2019 is an international standard that specifies the requirements for electrical supply track systems used to connect luminaires to the electrical grid. It defines the...
The IEC 62560:2015 standard specifies safety requirements for self-ballasted LED lamps intended for general lighting purposes, with voltages greater than 50 V and up to 250...
The UL 1993 Standard for Self-Ballasted Lamps and Lamp Adapters establishes safety requirements for self-ballasted lamps and lamp adapters, ensuring they do not pose electrical, fire,...
This document covers the general requirements and test methods for electromechanical switches with optional quality assurance procedures.
UL Standard for Safety for Light Emitting Diode(LED)Equipment for Use in Lighting Products,UL8750 Second Edition,Dated December 7, 2022
This Standard UL 1598: 2012 is issued jointly by the Association of Standardization and Certification (ANCE), the Canadian Standards Association (CSA),and Underwriters Laboratories Inc. (UL).
The IEC 62031:2008 standard outlines essential safety and general requirements for light-emitting diode (LED) modules utilized in general lighting applications. It provides the framework for ensuring...
This standard IS 15885 (Part 2/Sec 13): 2012 specifies the general and safety requirements for d.c. or a.c. supplied electronic controlgear for LED modules for supply...
The standard covers safety requirements for electrical appliances that operate with a voltage up to 250V for single-phase appliances and up to 480V for other appliances....
The purpose of this document IEC 60947-1:2020 is to harmonize as far as practicable all rules and requirements of a general nature applicable to low-voltage switchgear...
The IEC 61439-1: 2011 standard, titled “Low-voltage switchgear and controlgear assemblies – Part 1: General rules”, specifies the general requirements for low-voltage switchgear and controlgear assemblies....
Standard IS 15518: 2004(Part 1) was adopted by the Bureau of Indian Standards, after the draft finalized by the Electric Lamps and Their Auxiliaries Sectional Committee...
Standard IS 15111:2002( Part 1 ) was adopted by the Bureau of Indian Standards, after the draft finalized by the Electric Lamps and Their Auxiliaries Sectional...
IS 2418-1:2018 Indian Standard (Part 1) (Second Revision) was adopted by the Bureau of Indian Standards, after the draft finalized by the Lamps and Related Equipments...
Applicable of IS 418: 2004 tungsten filament incandescent lamps for general lighting service (GLS) which comply with the safety requirements in Doc ET 23 (5291)
The standard IS 16614: Part 1: 2018 – Double-Capped LED Linear Lamps – Part 1: Safety Specification outlines the safety requirements for double-capped LED linear lamps...
The BIS IS 16103 (Part 1): 2012 standard, issued by the Bureau of Indian Standards (BIS), covers the specifications for LED modules for general lighting purposes
The BS 1363 series provides essential requirements for the safety, construction, dimensional accuracy, electrical and mechanical testing, and markings for the UK national electrical power plug...
IEC 60335-1:2020 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances...
IEC 62368-1:2018 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office...
IEC 60598-1:2020 is available as IEC 60598-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to...
This Documents(EN 60670-1:2021) consists of the text of IEC 60670-1:2015 prepared by SC 23B “Plugs, socket-outlets and switches” of IEC/TC 23″ Electrical accessories”.
This part of IEC 60884 applies to plugs and fixed or portable socket-outlets for AC only, with or without earthing contact, with a rated voltage greater...
The following principles have been adopted by technical committe 108 in the development of this standard.These principles do not cover performance or functional characteristics of equipment....
IEC 60335-2-4Household and similar electrical appliances – Safety – Part 2-4: Particular requirements for spin extractors need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60335-2-5Household and similar electrical appliances – Safety – Part 2-5: Particular requirements for dishwashers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
IEC 60335-2-7Household and similar electrical appliances – Safety – Part 2-7: Particular requirements for washing machines need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60335-2-8Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances need to use LISUN goniophotometer, integrating...
IEC 60335-2-9Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances need to use LISUN goniophotometer,...
IEC 60745-2-1Hand-held motor-operated electric tools- Safety- Part 2-1: Particular requirements for drills and impact drills need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
IEC 60745-2-11Hand-held motor-operated electric tools – Safety – Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) need to use LISUN goniophotometer, integrating sphere...
IEC 60745-2-12Hand-held motor-operated electric tools -Safety – Part 2-12: Particular requirements for concrete vibrators need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 60745-2-14Hand-held motor-operated electric tools -Safety – Part 2-14: Particular requirements for planers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 60745-2-2Hand-held motor-operated electric tools – Safety – Part 2-2: Particular requirements for screwdrivers and impact wrenches need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
IEC 60745-2-3Hand-held motor-operated electric tools-Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60745-2-4Hand-held motor-operated electric tools – Safety – Part 2-4: Particular requirements for sanders and polishers other than disk type need to use LISUN goniophotometer, integrating...
IEC 60335-2-10Household and similar electrical appliances – Safety – Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines need to use LISUN goniophotometer,...
IEC 60335-2-11Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60335-2-12Household and similar electrical appliances – Safety – Part 2-12: Particular requirements for warming plates and similar appliances need to use LISUN goniophotometer, integrating sphere...
IEC 60335-2-13Household and similar electrical appliances – Safety – Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances need to use LISUN...
IEC 60335-2-14Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60335-2-15Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids need to use LISUN goniophotometer, integrating sphere and...
IEC 60335-2-16Household and similar electrical appliances – Safety – Part 2-16: Particular requirements for food waste disposers need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
IEC 60335-2-21Household and similar electrical appliances – Safety – Part 2-21: Particular requirements for storage water heaters need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
IEC 60335-2-23Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care need to use LISUN goniophotometer, integrating...
IEC 60335-2-24Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers need to use LISUN goniophotometer,...
IEC 60335-2-25Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens need to use LISUN goniophotometer, integrating...
IEC 60335-2-27Household and similar electrical appliances – Safety – Part 2-27: Particular requirements for appliances for skin exposure to optical radiation need to use LISUN goniophotometer,...
IEC 60335-2-29Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for battery chargers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60335-2-3Household and similar electrical appliances – Safety – Part 2-3: Particular requirements for electric irons need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60335-2-32Household and similar electrical appliances – Safety – Part 2-32: Particular requirements for massage appliances need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60335-2-35Household and similar electrical appliances – Safety – Part 2-35: Particular requirements for instantaneous water heaters need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
SAE ARP4087DWing Inspection Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 60335-2-26Household and similar electrical appliances – Safety – Part 2-26: Particular requirements for clocks need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
SAE ARP694DAerial Refueling Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.37Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power-driven vehicles and of their trailers need to use LISUN...
MIL-STD-3009LIGHTING, AIRCRAFT, NIGHT VISION IMAGING SYSTEM (NVIS) COMPATIBLE need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SAE ARP5825Design Requirements and Test Procedures for Dual Mode Exterior Lights need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-002Aerospace series – Lamps, incandescent – Part 002: Main characteristics need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-003Aerospace series – Lamps, incandescent – Part 038: Lamp, code 44 – Product standard need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
EN 2756 Aerospace series — Lamps, incandescent — Tests methods need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.65UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SPECIAL WARNING LAMPS FOR MOTOR VEHICLES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
EN 2240-001Aerospace series – Lamps, incandescent – Part 001: Technical specification need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 61347-2-13Lamp controlgear – Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules need to use LISUN goniophotometer, integrating sphere and...
IEC 60745-2-8Hand-held motor-operated electric tools – Safety – Part 2-8: Particular requirements for shears and nibblers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60745-2-9Hand-held motor-operated electric tools-Safety- Part 2-9: Particular requirements for tappers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 60745-2-5Hand-held motor-operated electric tools- Safety- Part 2-5: Particular requirements for circular saws need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 60745-2-6Hand-held motor-operated electric tools-Safety- Part 2-6: Particular requirements for hammers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62660-1Secondary lithium-ion cells for the propulsion of electric road vehicles – Part 1: Performance testing need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 62595-2-5Display lighting unit- Part 2-5: Measurement method for optical quantities of non-planar light sources need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ANSI/IES LM-66-20 Electrical and Photometric Measurements of Single-Based Fluorescent Lamp need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-20-20 Photometry of Reflector Type Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-45-20 Electrical and Photometric Measurements of General Service Incandescent Filament Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE S 010/E-2005 Photometry-the CIE System of Physical Photometry need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-51-20 Electrical and Photometric Measurement of High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-62-20 Laboratory or Field Thermal Measurements of Fluorescent Lamps and Ballasts in Luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-78-20 Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-79-19 Electrical and Photometric Measurements of Solid-state Lighting Products need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 094-1993 Guide for floodlighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-82-20 Characterization of Optical and Electrical Properties of Solid-State Lighting Products as a Function of Temperature need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
CIE 015:2018 Colorimetry, 4th edition need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 088:2004 Guide for the lighting of road tunnels and underpasses, 2nd ed need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 084-1989 Measurement of luminous flux need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-92-22 Optical and Electrical Measurement of Ultraviolet LEDs need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-9-20 Electrical and Photometric Measurement of Fluorescent Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 114-1994 CIE Technical Collection in photometry and radiometry need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 127-2007 Measurements of LEDs need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 194:2011 On Site Measurement of the Photometric Properties of Road and Tunnel Lighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test