IEC 60745-1:2006, IEC 61029-1:1990, and IEC 62841-1:2014 are safety standards focusing on motor-operated tools. Specifically, IEC 60745-1:2006 outlines general safety requirements for hand-held motor-operated electric tools, covering aspects to ensure safe operation during their intended use. IEC 61029-1:1990 deals with the safety of transportable motor-operated electric tools, setting forth general criteria for their safe design and functionality. IEC 62841-1:2014 expands the scope to include hand-held, transportable electric tools as well as lawn and garden machinery, specifying comprehensive general safety requirements to protect users from potential hazards.
CISPR 14-1:2016 (EN 55014:2021) and CISPR 14-2:2015 address electromagnetic compatibility for household appliances, electric tools, and similar apparatus. The first part, CISPR 14-1:2016 (EN 55014:2021), establishes emission requirements, limiting the electromagnetic disturbances these devices generate to prevent interference with other equipment. The second part, CISPR 14-2:2015, is a product family standard that specifies immunity requirements, ensuring the apparatus can operate normally in the presence of external electromagnetic disturbances.
Motor-Operated Tool Test Solution
Standard:
IEC 60745-1:2006 Hand-held motor-operated electric tools – Safety – Part 1: General requirements
LISUN supplies the fully test solutions for the following IEC 60745-1:2006, please see the below excel table:
IEC 60745-1:2006 Clause and Subject | LISUN MODEL |
8.1 IP number according to degree of protection against ingress of water | JL-X |
21.20 IP System | |
9.3 Test Figure 1 | SMT-PB |
9.4 Test Figure 2 | SMT-1213 |
12 Heating-Temperature Rise | WS-1 |
14 Moisture resistance | GDJS-015B |
Annex I 17 Endurance test apparatus | |
15 HV-test facilities | SG61000-5 |
20.2 spring-operated impact test apparatus | IK01-06 |
23.1.4 Isolation Transformer | ITEU-SP4K |
23.1.11 Switch tests of Clause 17 of IEC 61058-1. | CZKS-3 |
24.13 Flexing test apparatus | WDT-B42 |
28 Creepage distances, clearances and distances through insulation | CK-1 |
29.1 Ball pressure test | ZBP-T |
29.2 Glow wire test | ZRS-3H |
29.3 NeedLe Flame Test and tracking test | ZY-3&TTC-1 |
30 Resistance to rusting | YWX/Q-010 |
LISUN supplies the fully test solutions for the following IEC 61029-1:1990, please see the below excel table:
IEC 61029-1:1990 Clause and Subject | LISUN MODEL |
8.1 Test Finger Figure 1 | SMT-335F7 |
8.1 Test Pin Figure 2 | SMT-1213 |
8.1 Test Finger of 50N Force | SMT-1150 |
11 Heating-Temperature Rise | GDJS-015B |
12 Leakage current | WB2675D |
14 Protection against ingress of foreign bodies and moisture resistance | JL-X&GDJS-015B |
15 Insulation resistance and electric strength | WB2681A |
16 Endurance | GDJS-015B |
LVD-100KG | |
19 Impact hammer | IK01-06 |
20 Oxygen bomb | LS-B48 |
23 Flexing test apparatus | WDT-B42 |
27 Creepage distances | CK-1 |
28 Resistance to heat, fire and tracking | ZBP-T&GW-500 |
ZRS-3H | |
TTC-1 | |
29 Resistance to rusting | YWX/Q-010 |
LISUN supplies the fully test solutions for the following IEC 62841-1:2014, please see the below excel table:
IEC 62841-1:2014 Clause and Subject | LISUN MODEL |
6 Radiation, toxicity and similar hazards | EN62471-C |
8.12 thermal and humidity conditions | GDJS-015B |
9.3 Test probe B of IEC 61032 | SMT-PB |
19.1 Test probe B according to IEC 61032 | |
9.4 Test probe 13 of IEC 61032 | SMT-1312 |
12.4 Temperature rises | WS-1 |
12.6 Heating Cabinet | GW-500 |
13.1 Ball Pressure apparatus of IEC 60695-10-2 | ZBP-T&GW-500 |
13.2 glow-wire test of IEC 60695-2-11 | ZRS-3H |
14.2.2 IPX1-7 apparatus in accordance with IEC 60529( | JL-X |
15 Resistance to rusting | YWX/Q-010 |
18.8.1 electrostatic discharges in accordance with IEC 610o0-4-2 | ESD61000-2 |
18.8.2 fast transient bursts in accordance with IEC 61ooo-4-4 | EFT61000-4 |
18.8.3 Voltage Surge in accodance with IEC 61000-4-5 | SG61000-5 |
18.8.4 injected currents in accordance with IEC 61000-4-6 | RFCI61000-6 |
18.8.5 voltage dips and interruptions in accordance with IEC61000-4-11 | CSS61000-11 |
20.2 Spring operated test apparatus according to clause 5 of IEC 60068-2-75 | IK01-06 |
24.11 Flexing apparatus | WDT-B42 |
28 Creepage distances | CK-1 |
Annex C Leakage current | WB2675D |
Annex I.3 Vibration | LVD-100KG |
LISUN supplies the fully test solutions for the following CISPR 14-1:2016(EN 55014:2021), please see the below excel table:
CISPR 14-1:2016(EN 55014:2021) Clause and Subject | LISUN MODEL |
4.3.2 Frequency range 9 kHz to 30 MHz | EMI-9KA |
4.3.3 Frequency range 150 kHz to 30 MHz | EMI-9KB |
4.3.4 Frequency range 30 MHz to 1 000 MHz | EMI-9KC |
5.3.4 Radiated emission – 30 MHz to 1 000 MHz | |
5.1.3 Artificial Mains Network (AMN) | LISN-C |
LISUN supplies the fully test solutions for the following CISPR 14-2:2015, please see the below excel table:
CISPR 14-2:2015 Clause and Subject | LISUN MODEL |
5.1 Electrostatic discharge | ESD61000-2 |
5.2 Fast transients | EFT61000-4 |
5.3-4 Injected currents | LSBCI-40 |
5.5 Radio frequency electromagnetic fields, 80 MHz to 1 0o0 MHz | GTEM-2 |
5.6 Surges | SG61000-5 |
5.7 Voltage dips | CSS61000-11 |
Your email address will not be published. Required fields are marked *