Electric Toys Test Solution

These standards play crucial roles in ensuring toy safety. The first group focuses on electric toys. IEC 62115:2017 Electric toys-Safety is an international standard that details safety requirements for electric toys, covering electrical, mechanical, and thermal aspects to prevent risks like electric shock and fire. IS 15644:2006 Safety Of Electric Toys and UL 696:2020 Electric toys-Safety also set safety guidelines, with the former specific to India and the latter mainly used in the United States. Both standards emphasize proper design, construction, and testing to guarantee the safe operation of electric toys.

The other standards address broader toy safety. ISO 8124-1:2022 Safety of toys-Part 1: Safety aspects related to mechanical and physical properties is an international benchmark for the mechanical and physical safety of toys, ensuring they are free from hazards such as sharp edges, small parts, and instability. ASTM F963:2023 Standard Consumer Safety Specification for Toy Safety, a comprehensive U.S. standard, encompasses not only mechanical and physical safety but also flammability, chemical content, and labeling requirements. Together, these standards establish a global safety net to protect consumers, especially children, from potential toy-related risks.

Standard:

Part 1	IEC 62115:2017	Electric toys-Safety
Part 2	IS 15644:2006	Safety Of Electric Toys
Part 3	UL 696:2020	Electric toys-Safety
Part 4	ISO 8124-1:2022	Safety of toys-Part 1: Safety aspects related to mechanical and physical properties
Part 5	ASTM F963:2023	Standard Consumer Safety Specification for Toy Safety

Part 1 IEC 62115:2017 Electric toys-Safety

LISUN supplies the fully test solutions for the following IEC 62115:2017, please see the below excel table:

IEC 62115:2017 Clause and Subject	LISUN MODEL
10.2 Electric strength under humid conditions	GDJS-015B
11 Electric toys used in water, electric toys used with liquid and electric toys cleaned with liquid	JL-X
12.1 test Ehb of IEC 60068-2-75. the spring hammer test.	IK01-07
13.4.1 test probe 11 of IEC 61032	SMT-1150
13.4.1 test fingernail of Figure 7 of IEC 60335-1:2010	SMT-335F7
13.4.2 Drop Test	LS-B33
17 Clearances and creepage distances	CK-1
18.1 Resistance to heat–ball pressure test	ZBP-T
18.1 Resistance to heat–ball pressure test	GW-500
18.2 Resistance to fire–glow-wire test	ZRS-3H
19 Radiation and similar hazards	LS-IEC62115C19
Annex E Safety of electric toys incorporating optical radiation sources	LS-IEC62115C19
Annex B Needle-flame test	ZY-3
Annex D Electric toys with protective electronic circuits
D.2.2 Electrostatic discharge	ESD61000-2
D.2.3 Radiated fields	GTEM-2
D.2.4 Transient bursts	EFT61000-4
D.2.5 Voltage surges	SG61000-5
D.2.6 Injected current	RFCI61000-6
D.2.7 Voltage dips and interruptions	CSS61000-11

Part 2 IS 15644:2006 Safety Of Electric Toys

LISUN supplies the fully test solutions for the following IS 15644:2006, please see the below excel table:

IS 15644:2006 Clause and Subject	LISUN MODEL
11 Moisture resistance	GDJS-015B
13 Mechanical strength	IK01-07
18 Clearances and creepage distances	CK-1
19.1 Ball presure test	ZBP-T
19.1 Ball presure test	GW-500
19.2 glow wire test	ZRS-3H
20 Radiation, toxicity and similar hazards	LS-IEC62115C19
Annex B Needle-flame test	ZY-3
Annex B 15 Insulation resistance and dielectric strength	WB2681A

Part 3 UL 696:2020 Electric toys-Safety

LISUN supplies the fully test solutions for the following UL 696:2020, please see the below excel table:

UL 696:2020 Clause and Subject	LISUN MODEL
10 Coatings and Platings	EDX-2A
Figure 19.1	SMT-PA100A-UZ11
Figure 19.2	SMT-PA130A
Figure 19.3	SMT-PA140A
Figure 19.4	SMT-02T10
26 Leakage Current Test	WB2675D
27 Humidity Conditioning Test	GDJS-015B
30 Temperature Test	GDJS-015B
28.2 Drop test	DT-60KG
31/36 Dielectric Voltage-Withstand Test	WB2671B
34 Stability Test	LVD-100KG

Part 4 ISO 8124-1:2022 Safety of toys-Part 1: Safety aspects related to mechanical and physical properties

LISUN supplies the fully test solutions for the following ISO 8124-1:2022, please see the below excel table:

ISO 8124-1:2022 Clause and Subject	LISUN MODEL
5.12 Stability and overload tests	WDT-2
5.14 Impact test for toys that cover the face	LS-B33
5.18 Determination of temperature increases	WS-1
5.24.2 Drop test	DT-60KG

Part 5 ASTM F963:2023 Standard Consumer Safety Specification for Toy Safety

LISUN supplies the fully test solutions for the following ASTM F963:2023, please see the below excel table:

ASTM F963:2023 Clause and Subject	LISUN MODEL
4.2 Flammability	ZY-3
4.3.5 Heavy Elements	EDX-2A
4.15 Stability and Over-load Requirements	WDT-2
8.15 Test for Stability of Ride-on Toys or Toy Seats	WDT-2
4.25.9.4 flame rating of UL-94 V-0	HVR-LS
8.7.1 Drop Test	DT-60KG
8.10 Compression Test	LS-B08