
Lisun Electronics Inc.
Tel: +86(21)5108 3341
Fax: +86(21)5108 3342
Email: Sales@Lisungroup.com
[Global Office information......]
Automatic lightning surge generator SG61000-5 (desktop) equipment used to assess the power cord and stood in line to connect the internal switch to switch from the natural world and lightning caused by the high-energy transient interference performance to provide a common basis. Performance fully meet the IEC61000-4-5, EN61000-4-5 and GB/T17626.5 standards.
Specification:

IEC 61000-4-5 Free Download (PDF 0.6 MB)
Products of this category:
EMC500: This EMC test system is the update model of EMC300A. Measure Range from 9kHZ~300mHZ. The basic functions and principles of EMC500 are based on EMC300A.
ESD61000-2: Electrostatic discharge simulator (electrostatic gun) is in full compliance with IEC61000-4-2, EN61000-4-2 and GB/T17626.2 standards.
EMC300A: EMC testing is a science subject which studies how electric appliance or system can work together without causing performance declass within limited space, limited time, limited frequency spectrum resource. This EMI testing system Measure PD,QP and AV range from: 20dBμV-130dBμV(9kHz-150kHz);10dBμV-90dBμV (150kHz-30MHz).
EFT61000-4: This EFT immunity measurement meets the standard requirement of IEC 61000-4-4, EN61000-4-4 and GB/T17626.4 (high voltage regulator is adopted, and displayed by LCD).
SG61000-5: The performance of this surge generator meet the IEC61000-4-5, EN61000-4-5 and GB/T17626.5 standards.
CSS61000-11: Voltage dip and interruption generator meet the standard requirements of IEC61000-4-11, EN61000-4-11 and GB/T17626.11.
RWG61000-12 Ring Wave Generator is the test equipment in conformity to IEC standard IEC 61000-4-12 and ANSI-C62-41.
EMC200A/EMC200B: EMI Receiver equipped with this artificial network can test interference voltage of mains terminals.
CDN-M23: EMI Receiver equipped with this coupling/decoupling network is equivalent to test radiated electromagnetic disturbance of electric lighting appliance with frequency from 30~300MHz.
AB-CLP: EMI Receiver equipped with this absorbing clamp can indirectly test radiated interference power of household electrical appliance, power tool and similar electrical appliance with frequency from 30~300MHz.
VOL-PBE: EMI Receiver equipped with this voltage probe can test disturbance voltage from load terminals or control terminals.