中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語
24 Sep, 2020 1325 Views Author: root

Software Update Steps of LSG-1800BCCD/LSG-1700BCCD/LSG-5000CCD

LISUN will irregularly update the software of LSG-1800BCCD/LSG-1700BCCD/LSG-5000CCD. However, since each spectroradiometer in the system has its own independent hardware data file, we need to back up the hardware data file before updating the software (The step 2 below). The software cannot be installed without the hardware data file, and the use of the wrong hardware data file will cause deviations in the test results. The following takes LSG-1800BCCD software update as an example:

1. Save the old software settings: Open the old software, click system configuration, take a photo used to make the same settings when reinstalling the software.
2. Back up the hardware data file from the old installation file: Open the old software installation folder C:\Program Files (x86)\Lisun\LSG-1800B. COPY the following three hardware data files to the same folder as the new software.
3. Uninstall and completely delete the old software: Uninstall the LSG-1800BCCD software in the control panel or start menu, and then delete all the files in C:\Program Files (x86)\Lisun\LSG-1800B.
4. Install the new software: Click the following LSG-1800BCCD new software to install it (The hardware data file marked in red below is from step 2).
5. Restore settings: Enter the system configuration interface of the new LSG-1800B software, and refer to the photos retained in step 1 for settings.
6. Re-calibration: refer to the part 2 <System Calibration> of installation video of LSG-1800B https://www.lisungroup.com/products/goniophotometer/high-precision-rotation-luminaire-goniospectroradiometer.html to re-calibrate, and then it can do normal test.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test SystemsESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test ChamberLED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support.
Tech Dep: [email protected], Cell/WhatsApp: +8615317907381
Sales Dep: [email protected], Cell/WhatsApp: +8618917996096

Tags: , ,

Leave a Message

Your email address will not be published. Required fields are marked *