ESD Simulator Guns

The ESD61000-2 series ESD generator (also known as an Electrostatic Discharge Generator, ESD simulator, ESD immunity tester, ESD generator or ESD static tester) is a high-precision instrument developed by LISUN specifically for ESD immunity testing of electrical and electronic equipment. The function is to address the performance evaluation needs of various products under ESD interference scenarios: by accurately replicating ESD pulses, it provides standardized testing conditions for testing the operational stability of equipment under ESD interference.

The ESD61000-2 series Electrostatic Discharge Generator features a large Android touchscreen with Chinese and English support, built-in test procedures for national and international standards such as GB/T 17626.2 and IEC/EN 61000-4-2, and supports one-click access to preset parameters, making it widely applicable to EMC compliance testing needs in a wide range of fields, including LED lighting, consumer electronics, automotive electronics, industrial control and medical devices.

Standards:

Specifications:

Calibration data (for details, please refer to the 3rd Lab CNAS calibration report)：

Recommendation 1:
We recommend the LISUN ESD-DESK test bench. Designed and manufactured in accordance with IEC/EN 61000-4-2 (GB/T 17626.2 ) and ISO 10605 (GB/T 19951) for automotive electronics, it is designed for use with the ESD61000-2 Series ESD generators. The ESD-DESK includes the following: a test bench (assembled dimensions: 1600*800*800 mm), a reference metal ground plate (2800 mm long, 1800 mm wide, and 1.0 mm thick), a vertical coupling plate (500 mm long, 500 mm wide and 1.0 mm thick), a horizontal coupling plate (1600 mm long, 800 mm wide and 1.0 mm thick), an insulating pad (1450 mm long, 600 mm wide, and 0.5 mm thick) and a 470K resistor cable (1400 mm long).

ESD Standard DESK

Recommendation 2:
We recommend using the LISUN ESD-CALA electrostatic gun calibration kit for calibrating the ESD61000-2 series Electrostatic Discharge Generators. Designed and manufactured in accordance with IEC/EN 61000-4-2 (GB/T 17626.2) and ISO 10605:2023 Appendix B (GB/T 19951-2019 Appendix B), the ESD-CALA electrostatic gun calibration kit includes a target mounting plate 124*128*50cm (W*H*D), an electrostatic gun calibration target, a 20dB attenuator, and a cable for connecting the target to an oscilloscope..

ESD-CALA ESD Gun Calibrate Set

Recommendation 3:
We recommend using the LISUN ESD-HV30KV1G High Impedance High Voltage Meter for the air discharge voltage calibration of ESD61000-2/ESD61000-2A/ESD61000-2C Electrostatic Discharge Generators, which fully complies with the requirements of IEC 61000-4-2:2025 Clause 6.3.4 and Annex E.4.

ESD-HV30KV1G High Impedance High Voltage Meter

Recommendation 4:
We recommend using the LISUN ESD-FCP, an automotive electronic electrostatic field coupling plate (electrostatic discharge island). Designed and manufactured in accordance with Appendix F of ISO 10605:2023 (Appendix E of GB/T 19951-2019) for automotive electronics, it is designed and manufactured for use with the ESD61000-2C ESD generator. The ESD-FCP includes the following: a 300mm*600mm electrostatic field coupling plate made of 1.0mm thick brass; a 40mm wide electrostatic field coupling strip; and an 80mm diameter discharge island.

ESD-FCP Field Coupling Plate, Field Counpling Strip and Discharge Islands

ISO 10605 Figure F.1

LISUN ESD61000-2 ESD Simulator Guns – After-sales Frequently Asked Questions (FAQ).
LISUN ESD61000-2 ESD Simulator Guns were in the market for more than 10 years, LISUN engineers service team already summary the most of the After Sales Questions and Answers in the above link. Please read it carefuly, you can solve the most of the problems by yourself if you have some questions while using the instruments. LISUN will be continue to update this pages and more FAQ can be found in this topic link. 

Ni Jia

A good supplier for our company, the engineer is professional on training. We are considering to order more from LISUN.