LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
ANSI/CAN/UL 2849:2022 is a key safety standard for electrical systems of electric bicycles. It comprehensively covers multiple aspects of electrical safety, including insulation performance, short-circuit protection, overload protection, and temperature resistance of electrical components. The standard specifies strict requirements for the design, material selection, and installation of eBike electrical systems, aiming to prevent safety hazards such as electrical fires, electric shocks, and component damage caused by electrical failures.
This standard also focuses on the environmental adaptability and durability of eBike electrical systems, setting test requirements for performance under conditions like temperature fluctuations, humidity changes, vibration, and impact. It provides clear criteria for the production, testing, and compliance assessment of eBike electrical components, playing a crucial role in ensuring the safe operation of electric bicycles and protecting the life and property safety of users in North American and global markets that adopt this standard.
LISUN supplies the fully test solutions for the following ANSI/CAN/UL 2849:2022, please see the below excel table:
| ANSI/CAN/UL 2849:2022 Clause and Subject | LISUN MODEL |
| 8.2 Hazardous Voltage and Hazardous Energy Figure 18.1 | SMT-PB |
| 17 Flammability | HVR-LS |
| 28 Temperature Test | GDJS-015B |
| 31 Humidity Conditioning | |
| 32.10 Thermal cycling | |
| 29 Isolation Resistance Test | WB2681A |
| 32.9 Shock test | LVD-100KG |
| 38 Vibration Test | |
| 33 Impact Test | IK07-10&IK07-10VT |
| 35 Flexing Test | SW-6 |
| 36 Ingress Protection Tests | JL-X |
There are some standards focus on specifying technical requirements and test methods for different categories of lampholders in the lighting field, ensuring their safety, compatibility, and...
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN’s cable and wire test solutions meet IEC 60245-1, IEC 60227-1, IEC 60502-1 and IEC 60189 standards, covering electrical, mechanical, and safety tests for global compliance.
LISUN has all equipment according to the IEC60669 measurement, including environmental chamber, IP code waterproof dustproof test, switch lift test, etc.
LISUN’s plugs and sockets test solutions meet IEC 60884-1, IEC 60670-1, IEC 62613-1 standards, covering electrical, mechanical and safety tests for global compliance.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s mobile and network test solutions include EMC/EMI testing, color glossiness measurement, IP waterproof/dustproof tests, IK impact tests, and environmental simulation, meeting international standards.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract The UL 94 flammability test is the most authoritative flammability grading evaluation system in the fields of electrical and electronic products and plastic materials worldwide,...
Abstract: The waterproof performance of electrical and electronic product enclosures directly determines the safety, reliability and service life of equipment under humid, rainy, immersion and other...
Abstract Water spray test chambers designed for IPX5 and IPX6 waterproof testing represent critical equipment for verifying the ingress protection capabilities of electrical and electronic product...
Abstract As core equipment for verifying the environmental adaptability and reliability of industrial products, the temperature and humidity environmental chamber can accurately reproduce the dynamic changes...
Abstract In the R&D and quality inspection of products in LED lighting, electrical and electronic, and electronic component industries, environmental adaptability and reliability verification are core...
Abstract: This paper takes the JL‑56 IPX5 and IPX6 Waterproof Testing Machine in the LISUN JL‑X waterproof test system as the research object. Based on the...
Abstract IPX3/4 testing for lighting fixtures represents a critical validation methodology for luminaires deployed in challenging environmental conditions. This systematic analysis examines the oscillating tube apparatus...
Abstract IEC 60529 IPX3/IPX4 Testing establishes the definitive methodology for evaluating enclosure protection against sprayed water in luminaire applications. This comprehensive analysis examines five critical engineering...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
Abstract: The systematic evaluation of the waterproof performance of electronic and electrical products is a critical step in ensuring product reliability and market compliance. As the...
Abstract: Thermal chamber is a core instrument for verifying the environmental adaptability and reliability of industrial products, and plays a critical role in R&D and quality...
Abstract: The water spray test is a core method for verifying the waterproof and protective capabilities of electronic and electrical products. By simulating water ingress conditions...
Abstract: As the core functional unit of the high and low temperature humidity alternating test chamber, the temperature humidity controlled chamber is the key to achieving...
Vibration test systems are core equipment in the research and development and quality inspection of industrial products. By simulating vibration states under different environments based on...
Temperature and humidity are core environmental factors affecting the performance stability and structural reliability of industrial products. LED lamps, electronic components and various industrial materials have...
Abstract With the continuous improvement of waterproof performance requirements for products in industries such as electronic and electrical appliances, auto parts, ipx8 waterproof testing (the highest...
Abstract:With the acceleration of global industrialization, the ability of electronic, automotive, and lighting equipment to withstand extreme climatic conditions has become a core measure of product...
Abstract This paper systematically elucidates the technical principles and standardized methodologies for the IPX3 and IPX4 water ingress testing, which are critical assessments within the ingress...
Abstract In the process of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are key factors...
Abstract In the system of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are core indicators...
Humidity chamber is not a generic laboratory enclosure but it is a precision system that has a direct effect on the validity of reliability stability and...
The thermal test chamber is a fundamental tool of accelerated aging and analysis of the heat stress due to the fact that the heat is among...
The climate test chamber is used to simulate controlled climatic conditions such as temperature and humidity that the product undergoes during storage transportation and operation. Climate...
The use of high temperature test equipment is critical in whether materials would be able to survive and perform reliably under high thermal stress. Heat resistance...
A mini temperature chamber has proved to be a necessity in laboratories requiring accurate thermal regulation and is less costly in footprint and at the same...
A humidity test chamber is one of the foundations of stability testing in which moisture-induced degradation is a believable risk. Water vapor undergoes interactions on its...
Environmental test program qualifies electronic components as a basic condition that they should be able to work under various operating and storing conditions. Electronics in modern...
A climatic chamber is a major equipment in checking whether components are viable and can perform well in the case of combined temperature and humidity pressure....
Environmental chamber lacks being just hot or cold. Qualification of current products involves concomitancy and simultaneous regulation of airflow temperature and humidity plus in certain cases...
Abstract In the design and manufacturing of modern electrical and electronic products, the enclosure protection rating is a core indicator for assessing their reliability, safety, and...
A thermal chamber is a key laboratory equipment that is utilized to analyze the product behavior under temperature stress. Diminished time, duration of thermal exposure In...
Knowledge of the behavior of materials to repetitive temperature variations is vital in the design of durable products used in electronics, automobile, aerospace, and manufacturing industries....
Innovative products are supposed to perform in various weather conditions under extreme temperatures and humidity, high or low rates of climatic changes, as well as being...
In real-life situations, the products are hardly subjected to constant temperatures. Rather, they are subject to unremitting fluctuation as caused by climate, operating load, and nearby...
The conditions in the modern automotive and aerospace systems are so harsh that they subject materials, electronic and mechanical assemblies to the supreme strain. Temperature variations,...
Exposure to water has become one of the leading factors of failure of the electronic and mechanized commodities which are either being used in the outdoor...
Thermal stress analysis is an important tool in establishing the behavior of materials, electronics, and mechanical assemblies at excessive temperatures. The temperature test chamber will be...
Waterproofing is a critical design consideration to current electronic and mechanical designers that consider using their products in wet or outdoor environments. Consumer electronics, industrial controllers,...
The contemporary product production needs testing in the real environment, rather than laboratory testing on its own, when controlled. Materials, electronics, mechanical structures, and coatings as...
The ingress protection testing has been significantly changed in the past 10 years with the push of industries among outdoor-rated electronics, sealed industrial controls, marine-rated automation,...
Environmental testing is essential in engineering industries including the automotive, defence, electronics manufacturing, industrial equipment and medical equipment and aerospace industries as it assures durability and...
With the ever-increasing integration of electronics, composite materials and precision mechanical systems in modern products, there is an increased concern regarding reliability of these modern products...
Modern products have to resist environment conditions up to soft rains and jets of high pressure as well as short-term immersion. It does not matter whether...
Ingress protection test is one of the significant quality assurance measures of present day electrical and mechanical products. An IP test machine enables the engineers to...
The reliability and stability of the modern materials, electronics, and other consumer products is tested on the controlled environment in which temperature and humidity can be...
Abstract This paper focuses on the LISUN GDJS-015B Temperature and Humidity Control Cabinet, systematically expounding its technical principles, core performance parameters and industrial application value. As...
Abstract In the links of product R&D, production, and quality control, environmental reliability testing is a key means to verify the performance stability of products under...
Abstract In the field of electrical and electronic product manufacturing and quality inspection, the mechanical impact strength of enclosures is one of the core indicators for...
Abstract The waterproof performance of enclosure protection levels is a core indicator for measuring the reliability of electronic and electrical products, especially crucial for outdoor LED...
Abstract In the fields of material research and development and product quality testing, the impact of climatic environments on performance is crucial. As a core testing...
Abstract: In the production and quality inspection of lighting products, power equipment, and outdoor application equipment, the mechanical impact strength of the shell is a core...
Abstract Ingress Protection (IP) testing, as defined by international standards such as IEC 60529, is critical for ensuring the reliability and safety of electrical and electronic...
Abstract Humidity and temperature chamber, also known as environmental test chamber or thermal chamber, is a critical equipment designed to simulate various climatic conditions for evaluating...
Abstract The UL 94 Flammability Standards serve as a cornerstone in evaluating the fire performance of plastic materials and electrical equipment components. This paper delves into...
In the ever – evolving landscape of industrial and consumer product manufacturing, the protection of internal components from environmental factors, especially water ingress, is of utmost...
Introduction Heating chambers, also known as environmental test chambers, are critical tools in reliability testing, widely employed to simulate extreme climatic conditions such as high temperature,...
Introduction In the operation and maintenance of modern electrical equipment, insulation resistance testing is a critical process for ensuring safety, reliability, and performance. This testing method...
Introduction Environmental chambers are sophisticated testing instruments designed to replicate extreme environmental conditions such as high temperatures, low temperatures, humidity, salt spray, and vibrations. These...
Introduction A waterproof test chamber is a sophisticated piece of equipment designed to simulate wet environments, such as drizzle, heavy rain, spray, or full immersion, to...
Introduction Low temperature testing is a cornerstone of environmental reliability testing, playing a pivotal role in industries such as electronics, automotive, aerospace, and materials science. This...
Introduction In modern industrial production and scientific research, high-low temperature and humidity alternating test chambers are critical environmental testing devices widely used in industries such as...
Introduction In the contemporary world of electrical and electronic product design, IP (Ingress Protection) ratings serve as a crucial metric for assessing the capability of device...
Introduction In the design of modern electronic products, Ingress Protection (IP) ratings are crucial standards for assessing a device’s ability to withstand environmental factors such as...
Introduction In modern industry and scientific research, environmental simulation equipment plays a crucial role. These devices can precisely control key parameters such as temperature and humidity,...
Abstract Vibration testing is a crucial element in validating the reliability, structural integrity, and durability of components and finished products throughout their operational lifespan. This paper...
Abstract The insulation resistance tester plays a crucial role in ensuring the safety and efficiency of electrical equipment. The LISUN WB2681A, as an advanced insulation resistance...
Abstract Temperature and humidity chambers play a critical role in evaluating the durability and performance of various materials and electronic components under different climatic conditions. This...
Abstract Waterproof testing is a crucial part of ensuring the durability and functionality of products exposed to water or harsh environmental conditions. A reliable waterproof testing...
Introduction In the field of environmental testing, the thermal cycle test chamber plays a crucial role in ensuring the reliability of materials, components, and products under...
Abstract: The IPX4 waterproof test plays a critical role in determining the water resistance of electronic devices, electrical components, and other products used in various industries....
Introduction The vertical flame test is an essential procedure for evaluating the flammability of materials, especially in electrical equipment and plastic parts. This test assesses the...
Abstract This article explores the applications and principles of waterproof rain test chambers, focusing on their use in evaluating enclosure protection grades under various standards such...
The IK Vertical Hammer Impact Tester plays a critical role in evaluating the durability and resilience of electrical and electronic equipment subjected to mechanical impacts, as...
Abstract In electrical and electronic industries, ensuring the fire safety of materials used in products is a critical part of product testing and certification. The UL...
Introduction Temperature and humidity testing plays a crucial role in assessing the durability and reliability of products in extreme environmental conditions. The LISUN GDJS-015B Temperature Humidity...
The vibration test machine plays a crucial role in the fields of product development, quality control, and environmental testing. Among the leading technologies in this area...
Flammability testing plays a crucial role in ensuring the safety and compliance of electrical and electronic products. The vertical flammability test is a key method for...
Abstract Water quality testing equipment is often exposed to challenging environments, including water, dust, and humidity. Ensuring the equipment’s durability and reliability requires stringent waterproof testing...
Introduction The Horizontal Vertical Flame Tester (HVR-LS) is an essential tool for assessing the flammability characteristics of materials used in electrical and electronic products. This article...
Introduction The climate test chamber is an advanced tool designed to simulate various climatic conditions, such as heat resistance, cold endurance, dryness resistance, and humidity tolerance....
Introduction In industries ranging from automotive to aerospace and electronics, the ability of components and finished products to withstand vibrations is a critical factor for ensuring...
Abstract The waterproof chamber is an essential tool for evaluating the ingress protection (IP) ratings of electronic and electrical products against water intrusion. This paper discusses...
Introduction In today’s increasingly demanding industrial landscape, testing the durability and performance of products under various climatic conditions is critical to ensuring product reliability and long-term...
Abstract Insulation resistance testing plays a crucial role in determining the safety and operational efficiency of electrical equipment. An essential tool for this process is the...
Introduction The importance of environmental testing has grown exponentially as industries seek to ensure the durability and reliability of their products. One of the most commonly...
Introduction The IP65 test is a critical procedure for determining the effectiveness of enclosures in protecting internal components from environmental factors such as dust and water....
Introduction The UL flammability rating is a critical standard that classifies materials based on their ability to withstand flame exposure. This rating system is essential for...
This paper explores the role of electrodynamic shaker, particularly focusing on the LISUN LVD-100KG Electrodynamic Vibration Generator System. Electrodynamic shakers are widely used in various industries...
Water resistance testing is a critical method for evaluating the durability and performance of materials and products in corrosive environments. The salt spray test, specifically, is...
Abstract This article explores the use of humidity test chambers to evaluate product performance under varying climatic conditions. Emphasizing the importance of meeting industry standards, such...
The High and Low Temperature Humidity Chamber is an essential tool used in various industries to simulate environmental conditions, including temperature fluctuations and humidity levels. This...
Environmental testing is critical in understanding how various products respond to changing climatic conditions. This paper discusses the role of thermal shock chamber, specifically the LISUN...
Abstract Waterproof testing is crucial in ensuring the safety and functionality of electrical and electronic products in wet and humid conditions. This paper explores the principles,...
Abstract Humidity chambers, particularly the LISUN GDJS-015B Temperature Humidity Chamber, play a crucial role in simulating and testing the resilience of various materials and components to...
Abstract Ingress Protection (IP) testing is crucial in determining the durability and reliability of electronic devices and components exposed to environmental factors. The LISUN JL-X IP...
In today’s highly competitive electronics market, product durability and reliability are critical factors that can determine a product’s success. As consumer demand for waterproof and weather-resistant...
Abstract In the ever-evolving technological landscape, ensuring the durability and reliability of electronic devices and components is critical. Environmental test equipment plays a crucial role in...
Waterproof test chambers are critical tools for evaluating the water resistance of household, commercial, and industrial electrical and electronic equipment. These chambers adhere to international standards...
As a key component in the automotive power system, the performance of the drive solenoid valve directly affects the power output, fuel efficiency, and overall operational...
In today’s automotive manufacturing industry, quality inspection is a critical step to ensure the quality and performance of products. As automotive technology advances and consumer demands...
The UL94 horizontal and vertical burning tester is a precision device used to evaluate the combustion performance of materials. It is applicable in research, production, and...
With the continuous development of technology and the improvement of people’s living standards, electronic products and mechanical equipment have become an indispensable part of daily life....
Environmental testing refers to exposing products or materials to specific conditions, either natural or artificial, to evaluate their performance under realistic storage, transportation, and usage scenarios....
The high and low temperature test chamber is an essential device for conducting reliability tests on industrial products. It simulates high and low temperature environments to...
Waterproof test machine is applicable to a wide range of products, including but not limited to electronic components, outdoor lighting fixtures, automotive accessories, communication equipment, cabinets,...
Temperature Humidity Chamber introduction: Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
What is An Insulation Resistance Tester? Insulation resistance tester is an important technical tool to measure the protective capacity of electrical systems. It evaluates the electrical...
The constant temperature humidity chamber will cause different levels of damage to the machine and equipment after long-term temperature running-in. Therefore, the following points are common...
With the continuous development of modern society, there is increasingly high demand for the safety and reliability of electrical equipment. This is particularly true in the...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
What is a Waterproof Jet Test Device? IPX56 Waterproof Jet Test Device, is an open waterproof test equipment that belongs to the IPX56 standard. It is...
Introduction: In a number of different sectors, the capacity to simulate harsh weather conditions in order to test the performance and durability of items is essential....
Introduction: Temperature control is a crucial component of the manufacturing process for pharmaceutical products. This component helps ensure the quality, safety, and efficacy of the final...
The IPX7 Immersion tank Waterproof test Device is mainly used to test the physical and other related properties of electronic products, electrical products, lamps, electrical cabinets,...
The ipx4 Swing Pipe Water Spray Test Equipment is a waterproof performance testing equipment widely used in electronic and electrical engineering, communication, lighting, automobile and other...
In the modern society where waterproofing is ecoming more ubiquitous, more manufacturers are developing consumer products with various waterproof testing equipment. The purpose is to meet...
IPX7 Immersion tank Waterproof test Device, also known as rain test chambers, waterproof testing equipment, waterproof detectors, waterproof testing machines, IP waterproof testing machines, etc., are...
Introduction Environmental stress screening (ESS) is performed to determine the durability and dependability of electronic components and goods, and temperature and humidity chambers play a critical...
In normal applications, manufacturers of high and low temperature test chambershould pay attention to maintenance and upkeep after conducting experiments, which can increase the service life...
The high and low temperature humidity test chamber, also known as the temperature shock test chamber and the thermal cycle chamber, is a device used to...
In order to achieve reproducibility, temperature tests must be designed in such a way that the highest or lowest temperature reached at a certain point in...
With the popularity of smart devices and increasing demands for waterproof and dustproof features in devices like smartphones and watches, waterproof and dustproof technologies have received...
When it comes to the performance and reliability of components and systems, the aerospace sector is among the most demanding and crucial. Aerospace equipment must undergo...
Introduction: Solar panels are essential for capturing solar energy, which has quickly become an important renewable energy source. The need of rigorously testing the performance of...
Today’s digital era relies heavily on data centers to house and handle massive volumes of data. Energy usage and heat control are two major issues that...
Introduction As the globe moves toward cleaner and more sustainable methods of electricity production, the renewable energy industry is seeing enormous development and innovation. The development...
Introduction Environmental chambers reliability testing relies heavily on temperature cycling. Temperature cycling is a method of testing a product’s or component’s resilience and performance in severe...
Introduction: The ability to control heat is essential in the creation of any electrical equipment. Effective heat dissipation solutions are crucial to maintain maximum performance, reliability,...
Introduction Humidity’s effect on material deterioration may be measured in environmental chambers. The purpose of humidity testing is to evaluate a product’s performance and durability in...
Introductio Electronics play a crucial role in modern society because of how pervasive technology has become. Every electronic gadget, from cellphones to car systems, is built...
Introduction: Products need to be well-packaged so that they don’t get damaged or spoiled while being stored, transported, or distributed. It is crucial that items get...
Introduction Environmental elements such as temperature and humidity may have a major impact on how well and how long something lasts. The aerospace, automotive, construction, and...
Introduction Electronic components are often put through their paces in today’s fast-paced technological world, where they are exposed to a wide range of environmental conditions that...
Introduction It is of the utmost importance to ensure that the batteries in electric vehicles are both reliable and secure as the number of individuals who...
Introduction The corrosive effects of salt spray on building materials in coastal areas may have a major influence on their longevity and function. Extensive testing is...
Introduction The powers of diagnosis, treatment, and monitoring have all been significantly improved because of technological advances in medicine. Before they can be utilized in a...
Introduction The food and beverage business works in an environment that is highly regulated, and the emphasis is always placed on the quality and safety of...
Introduction More and more research and development are going into improved insulation materials in an effort to make buildings more energy efficient and environmentally friendly. A...
When assessing the effectiveness of insulating materials, thermal conductivity is a key feature to take into account. Applications ranging from thermal insulation to electronics depend on...
Introduction Corrosion is a common problem that arises in many different industries because it shortens the lifespan of products, structures, and materials. Through meticulous testing and...
Introduction The performance, dependability, and longevity of automotive components and systems may be evaluated under severe temperature settings, making thermal chambers an essential tool for automotive...
Introduction Industries as diverse as electronics, automobiles, airplanes, and telecommunications all rely on rapid temperature change testing. It entails putting items and parts through rapid temperature...
Introduction To guarantee their safe and dependable performance under harsh environments, aircraft components and systems must undergo extensive testing and validation within the aerospace industry. Aerospace...
In addition to components such as compressors, pressure accumulators, condensers, and dryers, the refrigeration system of the high and low temperature test chamber also has several...
Introduction Automotive, aerospace, construction, and maritime sectors all face major corrosion challenges. Manufacturers use coatings and metals with high corrosion resistance to counteract corrosion’s destructive effects....
Introduction Humidity and temperature chambers are crucial for product testing and development in many fields. The performance, dependability, and longevity of items may be evaluated in...
Introduction Electronic device R&D and testing rely heavily on temperature and humidity chambers. Electronic devices must prove their dependability, performance, and durability across a wide range...
What are the standards for high and low temperature chamber? High and low temperature chamber are used to test various raw materials, such as electronics, electrical products,...
Introduction Testing and developing batteries, which are vital power sources in many sectors including automotive, electronics, renewable energy, and aerospace, need temperature and humidity chambers. Demand...
The two main functions of a high and low temperature chambers are refrigeration and heating. During the heating and cooling process, accurate, efficient, and uniform heating...
Introduction Because they allow for precise and repeatable testing of components and systems under harsh climatic conditions, temperature and humidity chambers play an essential role in...
The temperature and humidity of a high and low temperature test chamber exist in two situations: alternating test chamber and constant test chamber. The control method...
Introduction Pharmaceutical research and development greatly benefits from the use of temperature and humidity chambers for the purpose of testing and evaluating medication products, formulations, and...
IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress....
Introduction Medical device testing and validation rely heavily on temperature and humidity chambers. Safety, dependability, and efficacy of medical equipment are of paramount importance; hence the...
The IPX8 Immersion tank Waterproof test Device is applied to electronic components, outdoor lighting fixtures, mobile phone casings, automotive accessories, etc. It is a test that...
Introduction To ensure the safety, quality, and shelf life of its goods, the food and beverage sector relies heavily on temperature humidity chambers for extensive testing....
LED lighting fixtures are being used more and more extensively indoors and outdoors, and their waterproof performance has become an important consideration for users. LED waterproof...
Scope of application Suitable for performance reliability tests for industrial products. This Temperature Humidity Chamber has a large temperature control range, and its performance indicators meet...
Introduction The performance and longevity of packing materials may be evaluated with the use of temperature and humidity chambers, which are multipurpose testing tools. The quality...
Programmable high low temperature chamber, also known as thermal test chamber, have been widely used in many industries to test the physical properties and endurance of...
High and low temperature chambers are a common testing equipment widely used in industries, research institutions, aerospace and other fields. By simulating extreme weather environments more...
When selecting high and low temperature humidity and heat test chamber, we should make rational selection according to our own needs, and at the same time,...
The appearance of the IPX34 Swing Pipe Water Spray Test Equipment and the test chamber shell are made of blue and white paint. They have evolved...
Introduction When conducting tests and experiments on materials, goods, and electronic components in a controlled environment, temperature and humidity chambers are indispensable instruments. Regular calibration of...
High temperature chamber is mainly used for high-temperature experiments in industrial and mining enterprises, laboratories, scientific research institutions, etc. It has the functions of drying and...
Horizontal and Vertical Flame Test Chamber is a device professionally designed to test the combustion performance and fire resistance of related materials, mainly used in building...
Temperature and Humidity Chamber is used to test the material structure and composite material, can withstand the range in the continuous environment of extreme low temperature or...
Introduction Electronic components are the backbone of contemporary technology, and many different fields depend on their dependability and efficiency. Electronic components are sensitive to temperature and...
Vibration exciters used in vibration laboratories are vibration generators. When selecting vibration generators, suitable types should be selected according to the test frequency range. Electro-hydraulic vibration...
IP Waterproof Testing Device is a high-precision testing tool for testing waterproof performance, airtightness and sealing of products. It has the advantages of precise testing and...
The IPX12 drip test box has the characteristics of circulating water in its box structure: for testing, it is both energy-saving and environmentally friendly. More importantly,...
The constant temperature humidity chamber is composed of six systems: control, humidity, refrigeration, heating, air circulation, and sensors. The working principles of these systems are: 1....
Introduction Manufacturing, construction, aerospace, and automotive are just a few of the sectors that rely heavily on material testing. The capacity of materials to survive various...
Waterproof Rain Test Chamber is an advanced device used to simulate atmospheric environment, so the safe use and correct operation of it is very important. So,...
I. Working Principle of Each Component of High and Low Temperature Constant Temperature Chamber The cooling system of high and low temperature test box is one...
In the production process of electronic devices, there is always a crucial step, and using a high and low temperature chamber to test product quality has...
Introduction To reach a sustainable and low-carbon future, renewable energy technologies like solar and wind power are essential. Thorough testing and assessment are required to guarantee...
High and low temperature humidity test chamber is a scientific experiment equipment for simulating various environmental conditions. It can simulate temperature and humidity conditions in real...
Why is the constant temperature humidity chamber blocked? 1. During the test, the door was opened, and there was icing in the working room. 2. The...
Introduction To make sure that textiles and clothing last and are comfortable to wear and functional, the fast-paced textile and apparel sector must use rigorous quality...
Because the high and low temperature chambers are used to test the relevant characteristics of goods, do not install them casually. If it is installed casually,...
High and Low temperature humidity chamber plays an active role in the fields of aviation, automotive, home appliances, raw materials, components, scientific research, etc. It can...
Introduction The evaluation of electronic products’ resistance to water, the assurance of their longevity, and the fulfillment of customer expectations are all facilitated by waterproof testing...
I.IK rating testing is what? IK is the shock and protection grade of the device shell. Generally, the protection requirements of IK and IP are both...
The IPX12 drip box consists of a Waterproof Test Equipment, a Waterproof Test Machine , etc. It uses the form of drip to carry out IPX1/2 waterproof...
IPX7 Immersion tank Waterproof test Device indicates that the waterproof grade of the product is 7. When the product is immersed in water for a short...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
Introduction In today’s technologically advanced society, electrical gadgets are often exposed to the elements, including water. Manufacturers put items through waterproof testing to guarantee they can...
The high and low temperature chamber is also known as environmental test chamber is a common testing equipment that simulates extreme weather environments more realistically through...
Introduction Temperature and humidity chambers are an essential component in many companies’ efforts to reproduce and analyze the effects of temperature and humidity on a diverse...
The high temperature test chamber is also known as the environmental testing equipment, is used to put the product into the test chamber, set the high...
What is the waterproof standard of the immersion tank waterproof test device: The IP (INGRESS PROTECTION) protection level system was drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION),...
The IPX5 and IPX6 waterproof testing machine is also known as IP waterproof testing equipment. Handheld water sprayers, flushing testing machines, etc. are an open waterproof...
Introduction Due to the fact that the durability and reliability of electronic devices are directly proportional to their level of water resistance, IP waterproof testing equipment...
I.The principle of high and low temperature test chamber alternating wet and heat test box: Under high and low temperature test chamber, due to the steam...
I. Overview of Temperature and Humidity Measurement Method of High and Low Temperature Humidity Chamber： Electric and electronic products are almost used in various climatic conditions...
Why should there be IP waterproof grade test? IP waterproof test equipment can also be called as rain test chamber, waterproof detector, waterproof test machine, IP...
Waterproof testing is mainly aimed at electronic products and equipment that are used outdoors or in harsh environments. It simulates the rainwater environment under different weather...
LISUN’S waterproof test equipment is divided into 1-9 levels of waterproof grade, including IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8, and IPX9 general waterproof grade...
What is the working principle of the water pressure waterproof test Air tightness waterproof test can be divided into many kinds, according to the detection method,...
Introduction There is an urgent need for electrical equipment that is resistant to water. It is necessary to have IP waterproof testing equipment in order to...
Introduction When it comes to HVAC (Heating, Ventilation, and Air Conditioning) systems, temperature and humidity chambers are essential for development and testing. Manufacturers and researchers may...
1. How to Purchase Waterproof Test Equipment Waterproof test equipment refers to instruments capable of carrying out various waterproof performance tests, including pressure testing, performance testing,...
High and low temperature chambers are a type of environmental test chamber and widely used in various tests. It contains many kinds of products and is...
Waterproof tester, also known as rain test boxes, rain testing machines, etc., is used to test the waterproof performance of appliances or appliances with rainproof functions....
The Waterproof Test System is mainly used for waterproof testing or sealing testing of complete electronic products or components. Using compressed air for testing is a...
Introduction As more and more of our daily lives revolve on electrical gadgets, it’s more important than ever to keep them safe against water damage. It...
Introduction The testing of new building materials often requires exposure to a range of temperatures and humidity levels. The performance, durability, and adaptability of building materials...
The Temperature Humidity Chamber is a kind of humidity testing equipment , used to test the range of material structure and composite materials that can be...
High and low temperature chambers are widely used in various industries such as electronics, electronics, aviation, chemical, military, etc. However, the testing requirements for products in...
High Low Temperature Testing Test Chamber Intermittent Wet and Hot Test Box is a special sealed test box. The correct use of the device can not...
Introduction When it comes to electronics, liquid damage is a major concern that may compromise their performance and lifespan. Manufacturers use IP waterproof testing to determine...
Introduction In the automobile sector, where the dependability and performance of cars and their components are of the highest significance, temperature humidity chambers play a key...
Waterproof testing is used to verify the effectiveness of protective covers, shells, and sealing washers that prevent water from penetrating the product; Check the ability of...
Introduction Testing and developing electrical products is impossible without environmental chambers. Electronic equipment is tested in specialized chambers that can reproduce a wide range of environmental...
Introduction In today’s technologically advanced society, electronic gadgets are ubiquitous and deeply ingrained in our everyday lives. As our reliance on electronic devices continues to grow,...
Introduction As part of the effort to locate dependable sources of energy for the long term, novel approaches to energy production have been researched. Electrodynamic vibration...
Introduction There is a considerable amount of unrealized potential in the form of vibrational energy that is produced by things like factories and automobiles and by...
Durability and dependability of products under extreme circumstances is a top priority in the field of product testing. Products, from electronics and automobile parts to outdoor...
Introduction Manufacturers in today’s fast-paced industry are under increased scrutiny to guarantee that their wares are long-lasting and risk-free for consumers. The impact resistance of items...
The application field of Temperature Humidity Chamber is very wide, so the established good market demand has great development space in the environmental test equipment industry....
Introduction The rapid development of technology has made electronic gadgets indispensable to modern living. We depend significantly on technology like smartphones, tablets, wearables, and smart home...
To simulate a range of environmental conditions, including those involving temperature and humidity, temperature humidity chambers are a subset of environmental chambers used for testing and...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
The Swing Ppe Water Spray Test Equipment is divided into three types: ipx34 shower rain tester, open type and box type. The spray nozzle uses special...
For now, there are more and more places where we use LED lights in our lives. LED is a light-emitting diode semiconductor device. Its working principle...
The test principle of the high and low temperature chamber has the tendency to simulate and simulate the temperature change in the natural environment. It is...
IP (Ingress Protection) protection grade system is drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION), which classifies electrical appliances according to their dust-proof and moisture-proof characteristics. The IP...
The high and low temperature test chamber is suitable for environmental simulation reliability tests such as high and low temperature constant and gradual changes, damp heat...
Precautions when purchasing the high and low temperature test chamber: 1. Before understanding the high and low temperature chamber, we should first understand the needs of...
1. Cleaning and maintenance inside and outside the Temperature Humidity Chamber ①. Before the high and low temperature test, the internal impurities must be removed. ②....
What is the waterproof jet test device? The waterproof jet test device can also be called IPX56 test device, hand-held water sprayer, flushing test machine, etc....
The High and Low Temperature Humidity Chamber is a kind of testing mechanical instrument used to test the extent of endurance of material structure and composite...
Waterproof test equipments is used to test the waterproof performance of appliances or appliances with rain-proof function, so that the product may be exposed to water...
In fact, one of the factors affecting the test results of the high and low temperature chamber is the sealing of the equipment. It can be...
Waterproof test equipments, also known as rain test box, rain test machine, etc., is used to test the waterproof performance of appliances or appliances with rain-proof...
If the high and low temperature humidity chamber uses ordinary water humidification particles, it will be relatively large. The humidity sensors of the equipment are more...
The core component of the compressor in the refrigeration system is the core component of the high and low temperature chamber, which plays a decisive role...
Accidents such as natural disasters have gradually entered our lives, such as floods, mudslides, heavy rains, and other natural disasters may occur around us. For such...
IPX7 immersion tank waterproof test device is divided into two types, one is stainless steel immersion test device 1; One is a glass-type immersion test device...
When the high and low temperature chamber is in the low temperature state, different test materials will have different physical shrinkage phenomena, which may make the...
What is the waterproof grade of IPX34 Swing Pipe Water Spray Test Equipment: IPX3 Swing Pipe Water Spray Test Equipment : spray holes are arranged in...
Waterproof test equipment, also known as rain test box, waterproof test device, rain test machine and other different names, can provide lifelike simulation of electronic equipment...
High and low temperature & humidity test chamber is a common test equipment that simulates the heat dissipation performance, stability performance, power consumption parameters, and estimated...
Waterproof test equipments can also be called as rain test box, ip waterproof testing machine and other names. It uses various detection methods such as simulated...
Waterproof test equipment can also be called waterproof detector, rain test box, waterproof testing machine and other different names. It can provide lifelike simulation of electronic...
Waterproof test machine is to test whether the product has waterproof performance by simulating the performance of electrical components and various products that may be drenched...
IPX5 and IPX6 waterproof test equipments are waterproof tests of two different levels. However, in LISUN, the two waterproof levels are combined into an IPX56 water...
The waterproof jet test chamber, as its name implies, is a waterproof test equipment with the appearance of a box type. It is mainly used to...
The IPX7 waterproof test chamber, also known as the immersion test machine, the soaking test box, the IPX7 waterproof equipmen is mainly used to test the...
What is the ipx7 waterproof test chamber? The ipx7 waterproof test chamber, also known as the immersion test machine, the waterproof test equipment, the ipx7 waterproof...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table is according to IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 and other relevant standards. • LVD-100KG: Combined the Vertical and Longitudinal total 4 directions in...
The use of environmental test chambers is very important for the accurate assessment of environmental stress cracking (ESC) in polymers. Environmental stress cracking, also known as...
The drip box consists of a vertical drip tester, an IPX12 drip test chamber, etc. It uses the form of drip to perform IPX1/2 waterproof test...
To detect current leakage and poor or damaged insulation that may cause arc faults, blown circuits, and danger of electrical shock or fire, an insulation resistance...
IPX1 waterproof test operation skills: 1. After plugging in the power switch, press the red button on the operation panel to start the control system; Then...
Thermal testing is carried out in a thermal chamber, also known as an environmental test chamber. The testing is carried out using convection. The main purpose...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
To ensure their goods can withstand even the most extreme circumstances, manufacturers often use a humidity chamber, a special device that simulates a variety of humid...
IPX12 drip tester has many names, such as rain drop testing instrument, rain drop testing machine, etc. The frame of IPX12 drip tester is composed of...
IP grade waterproof testing instrument is a grading standard of IP waterproof testing equipment, which is used to determine whether the IP waterproof of products meets...
IPX56 waterproof jet test device is composed of chassis and turntable, which can be placed separately, and movable casters are installed at the bottom of chassis...
IK ratings are defined as IKXX, where “XX“ is a number from 00 to 10 indicating the degrees of protection provided by enclosures (including luminaires) against external mechanical...
I、 Purpose of environmental test The environmental test examines the adaptability of the product to the environment, determines whether the environmental adaptability design of the product...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber, Environmental test chambers are according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
UL94 UL 94is one of the most used flammability tests for determining the relative flammability of plastic materials (Underwriters Laboratories test standard UL 94). Under carefully...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
The terms “shaker table” and “vibration table” can refer to a variety of things in the field of vibration testing. Shaker tables are used for a...
As a type of reliability test equipment, environmental test has developed into a method to predict how the product use environment affects the performance and function....
A humidity chamber often referred to as a temperature and humidity chamber , is appropriate for testing products like electrical equipment, home appliances, food, trolleys, vulcanized...
What is Ingress Protection testing? An enclosed product’s resistance to liquid and particle infiltration is assessed during ingress protection testing. Depending on the achieved resistance to...
Worldwide, enclosures and control cabinets are utilized in a variety of settings and must adhere to the tightest safety standards. A crucial role is played in...
The high and low temperature test chamber is a common test equipment for simulating the heat dissipation performance, stability performance, power consumption parameters and estimating the...
What is an Environmental Chamber? An Environmental Chamber, also known as a climate chamber or a climatic chamber, is an efficient method to test how sensor...
Environmental Chamber (GDJS-015B) LISUN’s climate testing chamber or environmental chamber is a sealed space where the temperature and humidity may be adjusted as needed. This device’s...
The LISUN IP waterproof test machine is widely used in the authentication test organization for products such as electrical & electronic products, and LED luminaires as...
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
Environmental test equipment is the general name of all test chambers simulating natural climate environment. Representative products include salt spray test chamber, high and low temperature...
JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test...
Environmental test chamber is a necessary equipment for enterprises engaged in the production of electronic products. It can test and test electronic products and is an...
The most of luminaires manufacturers are requested to do IK level test (Impact Protection). LISUN can supply the IK test instrument: IEC62262 Impact Protection Tester |...
How Does Test Chambers Work? Different systems are used in test chambers to create and maintain the ambient conditions depending on their intended use. Since they...
The test to evaluate and analyze the reliability of electronic products is called reliability test Reliability test is an activity to evaluate the functional reliability of...
What is Climate Chamber? Climate chambers is used to simulate a temperature enviromental condistions, it may also be called environmental chamber or Thermal Chamber or Temperature Chamber....
By evaluating the degree of protection given against mechanical incursion, dust, accidental touch, and water into casings and enclosures, ingress protection (IP) testing lowers the risk...
What is an Environmental Test Chamber? LISUN has been building the most recognizable environmental testing equipment in the industry. Every chamber sold is highly recommended in...
This HVR-LS Horizontal Vertical Flame Test Chamber meets the requirements of ANSI/UL94, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC695-2-2 , GB- 4943, GB/T5169.15, GB/T5169.16, GB/T5169.17, GBT5169.22 Standard. What’s use of Horizontal & Vertical Flame Test Chamber? It is...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
IEC (International Electrotechnical Commission) is the earliest international standardization organization in the world. It was established in 1906 to enhance international mutual understanding and hope that...
IEC 62262 IK protection test means that electrical equipment housings are protected against external mechanical collisions, and the IK standard applies to rated voltages not exceeding...
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
Environmental Chamber An Environmental Chamber is defined as an enclosed space where environmental conditions such as temperature and humidity can be controlled. Some chambers are also...
What is a Water proof test? Waterproof is the ability of any material to resist water and moisture. To be classified as waterproof, the material should...
Most electronic and other device manufacturers use the IP (Ingress Protection) scale, which ranges from 1 to 8. IPX1 is the lowest level of waterproofing, indicating...
What is an Environmental Chamber? An environmental chamber, also known as the climatic chamber or environmental test chamber, is an enclosed space for testing the effects...
What is the function of Environmental Chambers? Temperature, humidity, air pressure, light, and motion can affect the performance of a product. The environmental chamber can be...
What is a ball pressure test? Under the action of high temperature, the structural properties of non-metallic materials and insulating materials will change greatly, and this...
Introduction An environmental chamber, also known as a climate test chamber, is an enclosed area in which the temperature and humidity conditions can be modified as...
Technology is improving with growing demands. New equipment is introduced in the market to fulfil these changing needs. One such instrument is the Environmental Chamber. It...
Needle flame test is used to assess products that are prone to electrical or anyother fire hazards this article will look into different flame retardant test...
As more and more household appliances enter our daily life, and people use these electrical products more frequently, this requires that in addition to the design...
What is the LED test standard？ Semiconductor light-emitting diode (LED) is a new type of light-emitting body, with high electro-optical efficiency, small size, long life, low...
It is possible to test the reaction of goods when they are exposed to fluctuations in humidity by using a humidity chamber. This chamber is also...
Uncontrolled environmental conditions, such as temperature and humidity, may be achieved in an Environmental Chamber, which is an enclosed chamber. By delivering salt spray within the...
In the field of environmental testing, and the environmental chamber is a device that enables users to manipulate the ambient conditions in an enclosed space to...
Vibration test is to simulate the various vibration environment impacts encountered by the product in the transportation, installation. This test is to simulate the various impacts...
This HVR-LS Horizontal Vertical Flame Test Chamber meets the requirements of ANSI/UL94, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC695-2-2 , GB- 4943, GB/T5169.15, GB/T5169.16, GB/T5169.17, GBT5169.22 Standard. Horizontal Vertical Flame Test Chamber uses a bunsenburner with a specified...
The International Electrotechnical Commission (IEC) created the IEC 60068 standard, which is widely accepted throughout the world. Environmental testing for electronic equipment, components, and electromechanical products...
Climate chambers are enclosed spaces used to evaluate the impact of certain environmental conditions on biological things, industrial goods, materials, and electrical devices and components. Environmental...
The high and low temperature humidity environmental chamber is a test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc., used to test...
IP (International Protection) protection level is the dust and water protection level of the product shell specified by the International Electrical Association (IEC). The requirements for...
The high and low temperature environmental test chamber is also called the high and low temperature cycle test, which is one of the product environmental reliability...
The high and low temperature environmental chamber is formed by CNC machine tools, the humidification system pipeline is separated from the control circuit board, and the...
The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food,...
Application: The horizontal and vertical flame tester UL94 is mainly used to determine the combustion performance of plastic, rubber or film under a specified fire source...
Introduction: The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances,...
Temperature, humidity, and other environmental factors may be regulated in an Environmental Chamber. Corrosion may be simulated in certain chambers by spraying salt into the room....
An environmental chamber’s job is to find out how a product will perform in various climatic, physical, and other unusual circumstances. When a product is being...
Expert equipment for environmental testing, semi-conductive testing, chemical stability tests, and more is a temperature test chamber. The size of an environmental chamber temperature test chamber...
The walk-in environmental chamber is intended to determine the characteristics of your goods to deal with external conditions such as heat, cold, dryness, moisture, etc. The...
Environmental chamber is the general name of all test chambers that simulate natural climate environment. The representative products include salt spray test chamber, high and low...
UL94 flammability test grade is the most widely used plastic material flammability performance standard. It is mainly a fire test standard for plastic box foam materials...
The high and low temperature humidity chamber, as its name implies is the experimental equipment that performs high and low temperatures on the product. The production...
IEC 60068-2-6 <Environmental testing –Part 2-6: Tests – Test Fc: Vibration (sinusoidal)> consists basically of subjecting a specimen to sinusoidal vibration over a given frequency range...
The full name of IEC 60695-11-3 is Test flames – 500 W flames –Apparatus and confirmational test methods. It has been prepared by IEC technical committee...
Many customers have purchased LISUN GDJS Walk-in environmental chamber , but they will not use them frequently after purchase. It often needs to be idle for...
The test requirements for the IP level test of road vehicles lamps mainly refers to ISO20653, DIN 40050-9, and ISO12103, which defines the IP level, test...
High and low temperature and humidity controlled chambers GDJS Series is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
The environmental conditions test standard for automotive exterior lighting and optical signal devices is ISO16750 <Road vehicles-Environmental conditions and testing for electrical and electronic equipment>, IEC60068-2,...
As more and more household appliances enter our daily lives, and peoples frequently use these electrical products, it required household appliances not only need meet users...
Introduction of waterproof test system: The waterproof test system includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page...
Introduction for the High and Low temperature humidity Chamber: High and Low temperature humidity Chamber adopts imported special man-machine interface temperature and humidity controller, which is...
ZY-3 Needle flame tester is mainly used for testing lighting equipment, low-voltage electrical appliances, household appliances, power tools, electronic instruments, electronic instruments, etc. At the same...
Forehead thermometers is both medical product and electronic product. It only needs one or two seconds to complete a body temperature measurement, which is very suitable...
The full name of IEC 60068-2-75 is Environmental testing-Part 2-75: Tests- Test Eh: Hammer tests. It has been prepared by IEC technical committee 104:Environmental conditions, classification...
The full name of IEC 60068-2-1 is Environmental Testing Part 2-1: Tests-Test A: Cold. It is edited by the IEC technical committee in 2008.We will introduce...
LISUN GDJS seriesHigh and Low Constant temperature and humidity chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
Waterproof testing grade reflects the ability of moisture-proof of products. Especially for outdoor activities, it is unavoidable to be in the harsh environment of high humidity....
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
In general, LED can be used for more than 50000 hours, and some manufacturers are promoting their LED to operate for about 100000 hours. The main...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
The Hong Kong International Lighting Fair has become the largest industry exhibition in Asia, and the second largest in the world. LISUN participates this exhibition every...
HKTDC Hong Kong International Lighting Fair (Autumn Edition) 2017, organized by the Hong Kong Trade Development Council at the Hong Kong Convention and Exhibition Centre (HKCEC)...
Istanbul Light is an international platform, where all the players in the lighting industry come together under a same roof and where the latest technologies and...
In September and October 2013, Chairman Xi put forward a major initiative of building “The Silk Road Economic Belt” and “The 21st Century Maritime Silk Road” (referred to...
High Low temperature and humidity test chamber is used to simulate a actual temperature and humidity environment which it may caused any influence for surrounding objects....
In natural environment, temperature and humidity are two indivisible natural factors. Due to different geographical locations in different regions, the temperature and humidity effects generated are...
In recent years, many manufacturers are planning to manufacture common global LED drive products with a wide voltage input. But since different countries have different product...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
IEC 62262 (How to install the EUT when doing the IK degree protection test, ventilation requirements, quantity of hammer, distribution of the hammer and hammer each...
LVD’s goal is to ensure the safety usage of low-voltage equipment. Its range of application is on electrical products with voltage at 50V to 1000V AC...
Nowadays, with the development of LED industry, its technology continues to be mature and has widely applied at home and abroad. Comparing to mature markets in...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
India lighting market develops rapidly, research reports point that LED lighting market scale will reach 1.14 billion dollars, growth 47.1%. India government intends to make India...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
IESNA-LM-80 (Measuring Lumen Maintenance of LED Light sources) is an approved method by Lighting Engineering Association of North America (IESNA) for the third generation SSL products;...
LED has the features of long life, but with the different working condition and drive current, its life will be different, but generally the life will...
At the end of October 2016, Lisun attended lighting fair in as in previous years. Hongkong International Lighting Fair has been an ideal platform for LED...
In October 5th-7th 2016, New Delhi LED lighting exhibition held in New Delhi, the capital of India. As one of India’s largest LED lighting exhibition, New...
Lisun will come with professional technical team to attend 2016 Germany Frankfurt Lighting Fair( Light + Building) dated on 13th Mach ~18th March, 2016. This time...
IEC 60529 (GB4208-2008) IP code is a coding system to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of...
The 2015 New Delhi Autumn LED Expo was successfully held during 3th December~5th December. As one of India biggest exhibition, this exhibition main relate different lighting...
It is the second time we have attended the fair, and it is a successful and wonderful fair. Lisun’s booth attracks numerous people’s visit.
During the exhibition, Lisun showed its main instruments which attracted many customers to stop and talk. Among them, there are not only many old customers hope...
USA Environmental Protection Agency(EPA) and Department of Energy(DOE) successively released Energy Star and Lighting Facts Standards for LED Luminaires/Bulb from 2010, which makes relevant industry persons...
As in previous year, Lisun and its instruments appeared at booth ED-A01 of Hong Kong International Lighting Fair (Autumn Edition) during 27th October to 30th October....
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
