India – LISUN engineer provide installation and training for LM-79 Moving Detector Goniophotometer (Mirror Type C) on-site

In the rapidly evolving global lighting industry, precise testing and quality control are essential. Recently, a well-known testing laboratory in India successfully introduced LISUN’s LSG-6000CCDLM-79 Moving Detector Goniophotometer (Mirror Type C), further enhancing its lighting product testing capabilities. This collaboration not only highlights LISUN’s outstanding technical expertise in optical testing but also demonstrates the laboratory’s pursuit of high-quality testing equipment.

The customer is a well-established and reputable testing laboratory in India, dedicated to the testing and certification of lighting products. They have long been familiar with LISUN and its products, recognizing LISUN’s leading position in optical testing equipment. Initially, the laboratory explored LISUN’s website to gain insights into the functions and advantages of its LM-79 Moving Detector Goniophotometer (Mirror Type C), particularly the LSG-6000CCDLM-79LM-79 Moving Detector Goniophotometer (Mirror Type C). Through preliminary research, the customer realized that LISUN’s advanced testing technology could significantly enhance their testing capabilities, helping them maintain a competitive edge in the industry.

During the equipment selection process, the customer’s key requirements included:
• Adaptability for Different Lamp Sizes – The laboratory needed a goniophotometer capable of testing lighting products of various sizes to ensure comprehensive evaluations.
• Compliance with International and Local Standards – The equipment had to meet LM-79-1 and IS 16106 standards to ensure the authority and compliance of test data.
• Optimized Laboratory Space Utilization – Given the limited space available, the equipment’s dimensions and layout needed to align with the laboratory’s setup.
• Budget Considerations – While prioritizing quality, the procurement cost had to remain within the laboratory’s budget constraints.

Based on these requirements, LISUN’s engineering team recommended the LSG-6000CCD LM-79 Moving Detector Goniophotometer (Mirror Type C). This system features a high-precision CCD detector, allowing for fast and accurate photometric measurements of lighting products, ensuring reliable test results. Additionally, its vertical rotating structure design not only saves space but also meets the laboratory’s practical application needs. After thorough evaluation, the customer confirmed that this equipment fully met their technical and budgetary requirements and ultimately decided to proceed with the purchase.

Following the selection of the LSG-6000CCD LM-79 Moving Detector Goniophotometer (Mirror Type C), the customer maintained close communication with the LISUN team to ensure a smooth procurement process. Upon finalizing their budget, the customer promptly contacted LISUN and completed the purchase process. This proactive approach ensured that the equipment was delivered in the shortest possible time, preventing delays that could have impacted the laboratory’s operations.
Customizing the Darkroom Solution

Given that the accuracy of goniophotometric testing depends on a well-controlled environment, LISUN engineers designed a custom darkroom solution for the customer before shipment. This solution was tailored to the laboratory’s specific conditions, ensuring that the testing environment met LM-79 standards and provided precise measurement results.

On-Site Installation and Calibration
Once the equipment arrived at the laboratory, LISUN dispatched an experienced engineering team to the site to assist with installation and calibration. The engineers followed strict installation protocols to ensure that the system was set up correctly and operating under optimal conditions.

India – LISUN engineer provide installation and training for LM-79 Moving Detector Goniophotometer (Mirror Type C) on-site

Comprehensive Training for Laboratory Staff
To enable the laboratory personnel to fully utilize the LSG-6000CCDLM-79 Moving Detector Goniophotometer (Mirror Type C), LISUN engineers provided a comprehensive on-site training program covering:
• Basic Equipment Operation – Instructions on proper startup, shutdown, and core functionality.
• Testing Procedures and Data Analysis – Guidelines on conducting photometric tests and interpreting measurement data.
• Maintenance and Troubleshooting – Tips to help laboratory staff conduct routine maintenance and resolve minor technical issues, minimizing downtime.

India – LISUN engineer provide installation and training for LM-79 Moving Detector Goniophotometer (Mirror Type C) on-site

India – LISUN engineer provide installation and training for LM-79 Moving Detector Goniophotometer (Mirror Type C) on-site

Through this hands-on training, the laboratory staff quickly became proficient in using the equipment, enabling them to perform tests efficiently and accurately.
After the equipment was fully operational, the customer expressed high satisfaction with both the LSG-6000CCD LM-79 Moving Detector Goniophotometer (Mirror Type C) and LISUN’s service. They highlighted several key benefits:
• Highly Accurate and Reliable Test Data – The equipment’s advanced measurement capabilities ensured compliance with international standards, supporting product certification processes.
• Professional and Efficient Installation and Training – The on-site support provided by LISUN engineers facilitated a smooth transition and optimal system operation.
• Exceeding Expectations in Every Aspect – From consultation and procurement to installation and training, LISUN’s team demonstrated outstanding professionalism and responsiveness.

This successful collaboration not only strengthened the customer’s testing capabilities but also reaffirmed LISUN’s leadership in the global optical testing equipment market. Moving forward, LISUN remains committed to its mission of delivering high-quality testing solutions and exceptional customer service, helping industry partners achieve higher testing standards.
• By sharing this success story, LISUN once again demonstrates its excellence in photometric testing and looks forward to partnering with more industry leaders to drive innovation and quality assurance in lighting testing technology.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997